Laserfiche WebLink
MANUFACTURER <br /> CUSTOM-BILT METALS <br /> 1333 Corporate Drive, Suite 103 <br /> Irving,Texas 75038-2520 <br /> (800) 826-7813 or info@custombiltmetals.com <br /> www.custombiltmetals.com <br /> SL-100 Guide Specifications <br /> This Guide Specification is to be used to develop an office master specification or specifications for a <br /> project.In either case,this Guide Specification must be edited to fit the conditions of use.Particular <br /> attention should be given to thedeletion of inapplicable provisions.Include necessary items related to a <br /> particular project.Include appropriate requirements where blank spaces have been provided. <br /> SECTION 076100-Sheet Metal Standing Seam Roofing-SL-100 <br /> Note to Designer:This product is designed for roof slopes as low as 3:12.Please consult a <br /> Custom-Bilt Metals representative for slope design restrictions. <br /> PART 1—GENERAL <br /> 1.01 SECTION INCLUDES <br /> The work includes,but is not necessarily limited to,furnishing and installation of all preformed <br /> metal roofing,and accessories as indicated on the drawings and specified herein. <br /> 1.02 RELATED SECTIONS <br /> Edit for project conditions.Section Numbers indicated are those recommended by CSI <br /> Masterformat 2004;revise if numbers differ from those used in Project Manual. <br /> A. Structural Metal Framing:Section 051000 <br /> B. Structural Metal Roof and Floor Decking:Section 053000 <br /> C. Metal fabrications:Section 055000 <br /> D. Wood framing: Section 061000 <br /> E. Glued-Laminated construction:Section 061800 <br /> F. Thermal Protection:Section 072000 <br /> G. Fire and Smoke Protection:Section 078000 <br /> H. Sheet metal Gutters and Downspouts:Section 077123 <br /> I. Joint Protection not specified herein: Section 079000 <br /> J. Painting and coating not specified herein:Section 099000 <br /> 1.03 PERFORMANCE REQUIREMENTS <br /> A. TESTING AND CERTIFICATION <br /> 1. ASTM 1592,Standard Test Method for Structural Performance of Sheet Metal Roof <br /> And siding systems by Uniform Air Pressure Difference. <br /> 1.04 SUBMITTALS <br /> A. PRODUCT DATA <br /> 1. Submit manufacturer's technical product data,installation instructions and <br /> recommendations for each type of roofing required. <br /> B. SAMPLES <br /> 1. Submit Manufacturer's standard color Samples for Architect's/Engineer's selection. <br /> 2. Submit(2) 12"long full width Panel Samples showing shape and a representative color <br /> chip for Architect's/Engineer's acceptance. <br /> C. SHOP DRAWINGS <br /> 1. Installer to submit complete shop drawings indicating thickness and dimensions of parts, <br /> fastenings and anchoring methods,details and locations of seams,transitions,and other / <br /> 10/1/2013 SL-100 CSI Guides Specifications 076100 <br />