Laserfiche WebLink
• <br /> BUS WIRES <br /> 16 AWG nickel-plated copper <br /> BRAID/OUTER JACKET <br /> Tinned-copper braid with modified po olefin jacket(-CR)or fluoropolymer <br /> jacket(-CT). <br /> DIMENSIONS <br /> 5XL and 8XL 12XL <br /> Maximum width 0.56 in(14 mm) 0.62 in(16 mm) <br /> Maximum thickness 0.24 in(6 mm) 0.24 in(6 mm) <br /> NOMINAL WEIGHT <br /> 92 lb/1000 ft 104 lb/1000 ft <br /> CONNECTION KITS <br /> nVent RAYCHEM RayClic or FTC connection kits must be used with XL-Trace <br /> heating cables.Refer to the Pipe Freeze Protection and Flow Maintenance Design <br /> Guide(H55838)for proper connection kit selection. <br /> APPROVALS <br /> UL 718K Pipe Heating Cable SP� <br /> LISTED C US <br /> -W <br /> 41* <br /> APPROVED <br /> SP• <br /> C US <br /> -W <br /> Refer to the Pipe Freeze Protection and Flow Maintenance Design Guide(H55838) <br /> and the Fire Sprinkler Freeze Protections Design Guide(H58489)for specific <br /> product approval details. <br /> GROUND-FAULT PROTECTION <br /> To minimize the danger of fire from sustained electrical arcing if the heating <br /> cable is damaged or improperly installed,and to comply with the requirements of <br /> nVent,agency certifications,and national electrical codes,ground-fault equipment <br /> protection must be used on each heating cable branch circuit.Arcing may not be <br /> stopped by conventional circuit protection.Many nVent RAYCHEM control and <br /> monitoring systems meet the ground-fault protection requirement. <br /> nVent.corn 4 <br />