8417 EVERGREEN WAY PANDA EXPRESS 2022-05-23

virtmzi4r,-,w D PROHIBITED SIGNAGE TENANT SIGNAGE SPECIFICATIONS 1. Signs constituting a Traffic Hazard: 1. Sign Material No person shall install or maintain, or cause to be installed or maintained, any sign which simulates or imitates in size, - General: Signage must be constructed and installed to meet all codes and city color, lettering or design any traffic sign or signal, or which requirements. All penetrations of the building structure required for signage installation shall be sealed watertight. Color and finish of attachments along with makes use of the words "STOP", "LOOK", "DANGER" or any words, phrases, symbols, or characters in such a manner as to sealants must match the adjacent exterior finish. interfere with, mislead or confuse traffic. -Material: . Individual channel letter and cabinet signs with a minimum of 3" aluminum 2. Signs painted directly on a building surface will not be returns shall be allowed. Faces must be constructed with durable materials such as permitted. acrylic of panaflex. Illuminations shall be restricted to internal, face illumination, halo illumination, or combination of both. 3. Wall signs may not project above the top of a parapet, the roof line at the wall, or roof line. 2. Location: All signs must be located on the fascia above the entrance of the, indicated by the elevations. No signs shall be allowed in the rear elevation of the 4. There shall be no signs that are flashing, moving or building. audible. 5. No sign shall project above or below the sign-able area. 3. Number: Each tenant is allowed building mounted signs in the store fronts, The sign-able area is defined in the attached exhibit for tenants. not exceeding the allowed square footage. End cap tenants are allowed signs on a maximum of two elevations, one in the store front, and one on the side elevations. 6. No signs will be allowed on elevations facing the adjacent hotel 7. Any portable signs in walkways or parking lots 4. Area: Each tenant is allowed a maximum wall sign area of 15% of the facade, 8. Signage is not allowed on fabric awnings, unless authorized by the landlord. upon the elevation it is located on. 5. Electrical Components: All electrical signage shall have UL labels. All raceways, transformers, electrode boxes, switches, wiring, conduit, and access hatches shall be concealed. Signs shall have a dedicated circuit and controlled by a time clock or photo cell. COAST SIGN INCORPORATED CFT EVERETT, WA SIGN PROGRAM July 17, 2019 PAGE 4