2235 LAKE HEIGHTS DR 2020-12-23 - Laserfiche WebLink

22. A 2-year Warranty Bond in the amount of 10%of the construction costs for all Stormwater Infrastructure shall be submitted to the City prior to final approval/close out of the permit. 23. As-builts of storm sewer,sanitary sewer, and water systems are required to be submitted per current City of Everett Design and Construction Standards and Specifications for Development manual, prior to final approval/close out of the permit. 24. In general, please call out all utilities and site features in accordance with the specific type and standard drawing number listed in the City's current Design and Construction Standards and Specifications for Development. https://everettwa.gov/1531/Design-Construction- Standards 25. Please also clearly label all features as either existing or proposed and clearly show on the site plan using specific line types, hatch patterns, and a legend. 26. After completing all required Land Use processes, please submit 4 sets of civil plans with your public works permit application package along with 2 sets of drainage reports, SWPPP's and any additional reports. Please let me know if you have any questions while putting your plans together. Fire:Steve Goforth,425.257.8100 1. Access The International Fire Code requires that all new structures shall provide Fire Department access roads to within 150 feet exterior walking distance of all portions of the ground floor.Fire Department access roads (Fire Lanes) shall provide a minimum of 20 feet in width of unobstructed, paved driving surface,exclusive of shoulders,with a minimum clear height of 13'6" Inside turn radii must be 32 feet.Outside turn radii must be 52 feet for ladder apparatus. Slope approach and departure angles must not exceed 8 degrees. Fire lane grade must not exceed 10 percent. Fire lane construction must comply with AASHTO H30 load capacity(80,000 GVW). Fire Lanes will be posted and maintained as required by the Fire Department. Unorthodox access which meets code requirements but is too unusual for crews,will not be allowed. Call Fire Marshal's Office for apparatus specifications. 2. Fire Lane Marking- Fire apparatus access roads shall be marked whenever necessary to maintain the unobstructed minimum required width of roadways. Fire lanes shall be marked as follows: a. Curbs shall be identified by red traffic paint with a 6-inch wide stripe on the top and front, extending the length of the designated fire lane. b. Rolled curbs shall be identified by red traffic paint with a 6-inch wide stripe on the curb,extending the length of the designated fire lane. c. Lanes without curbs shall be identified by red traffic paint with a 6-inch wide stripe on the pavement,extending the length of the designated fire lane. d. The words 'NO PARKING- FIRE LANE'shall be in 3-inch stroke white letters 18 inches Revl 18-037 / Page 4 of 7)