3800 RIVERFRONT BLVD 2021-01-28 - Laserfiche WebLink

I Stormwater Pollution Prevention Plan • Section 3 —CONSTRUCTION BMPs. This section provides a detailed description of the BMPs to be implemented based on the 12 required elements of the SWPPP (SWMMWW 2005). • Section 4—CONSTRUCTION PHASING AND BMP IMPLEMENTATION. This section provides a description of the timing of the BMP implementation in relation to the project schedule. • Section 5 —POLUTION PREVENTION TEAM. This section identifies the appropriate contact names (emergency and non-emergency), monitoring personnel, and the onsite temporary erosion and sedimentation control inspector. • Section 6—INSPECTION AND MONITORING. This section provides a description of the inspection and monitoring requirements such as the parameters of concern to be monitored, sample locations, sample frequencies, and sampling methods for all Stormwater discharge locations from the site. • Section 7—RECORDKEEPING. This section describes the requirements for documentation of the BMP implementation, site inspections, monitoring results, and changes to the implementation of certain BMPs due to site factors experienced during construction. Supporting documentation and standard forms are provided in the following Appendices: Appendix A: Civil Plan Set(Reduced Size) Appendix B: General Permit(Notice of Intent) Appendix C: NOI and EPA Authorization Appendix D: Site Inspection Forms Appendix E: Corrective Action Form Appendix F: SWPPP Amendment Log Appendix G: Subcontractor Certifications/Agreements Appendix H: Grading and Stabilization Log Appendix I: SWPPP Training Log 111 Appendix J: Delegation of Authority Appendix K: Best Management Practices (BMP's) Appendix L: Engineering Calculations 1 I 2