3800 RIVERFRONT BLVD 2021-01-28 - Laserfiche WebLink

I Stormwater Pollution Prevention Plan • Temporary and Permanent Seeding (BMP C120) ■ Mulching (BMP C 121) ■ Plastic Covering(BMP C123) • Sodding (BMP C124) ■ Dust Control (BMP C140) • Post-Construction Soil Quality and Depth(BMP T5.13) 3.1.6 Element#6—Protect Slopes All cut and fill slopes will be designed, constructed, and protected in a manner that minimizes erosion. The following specific BMPs will be used to protect slopes for this project: ■ Temporary and Permanent Seeding(BMP C l20) 3.1.7 Element#7—Protect Drain Inlets All downstream storm drain inlets shall be protected to prevent sediment-laden drainage from entering the storm drainage conveyance system. See sheets C2.01-C2.02, C2.03, and C2.31 of the civil plans for locations of Filter Fabric Protection for CB's (Storm Drain Inlet Protection). However, the first priority is to keep all access roads clean of sediment and keep street wash water separate from entering storm drains until treatment can be provided. • Storm Drain Inlet Protection(BMP C220) 3.1.8 Element#8—Stabilize Channels and Outlets Outlets discharging to open channels will have necessary outfall protection installed to prevent scour and erosion. Rock check dams will be installed as necessary. The following BMP's will be used to stabilize channels and outlets: I . Interceptor Dike and Swale (BMPC200) • Outlet Protection(BMP C209) 3.1.9 Element#9—Control Pollutants All pollutants, including waste materials and demolition debris, that occur onsite shall be handled and disposed of in a manner that does not cause contamination of storm water. Good housekeeping and preventative measures will be taken to ensure that the site will be kept clean, well organized, and free of debris. If required, BMPs to be implemented to control specific sources of pollutants are discussed below. Vehicles, construction equipment, and/or petroleum product storage/dis pensing: I I I