Laserfiche WebLink
• <br /> EVERETT HOUSING AUTHORITY EVERETT, WA <br /> Administrative Office Upgrades January 13, 2020 <br /> C. Fasteners: Provide door hardware manufactured to comply with published templates <br /> prepared for machine, wood, and sheet metal screws. Provide screws that comply with <br /> commercially recognized industry standards for application intended, except aluminum <br /> fasteners are not permitted. Provide Phillips flat-head screws with finished heads to match <br /> surface of door hardware unless otherwise indicated. <br /> 1. Concealed Fasteners: For door hardware units that are exposed when door is closed, <br /> except for units already specified with concealed fasteners. Do not use through bolts <br /> for installation where bolt head or nut on opposite face is exposed unless it is the only <br /> means of securely attaching the door hardware. Where through bolts are used on <br /> hollow door and frame construction, provide sleeves for each through bolt. <br /> 2. Fire-Rated Applications: <br /> a. Wood or Machine Screws: For the following: <br /> 1) Hinges mortised to doors or frames; use threaded-to-the-head wood screws <br /> for wood doors and frames. <br /> 2) Strike plates to frames. <br /> 3) Closers to doors and frames. <br /> b. Steel Through Bolts: For the following unless door blocking is provided: <br /> 1) Surface hinges to doors. <br /> 2) Closers to doors and frames. <br /> 3) Surface-mounted exit devices. <br /> 3. Spacers or Sex Bolts: For through bolting of hollow-metal doors. <br /> 4. Gasketing Fasteners: Provide noncorrosive fasteners for exterior applications and <br /> elsewhere as indicated. <br /> 2.15 FINISHES <br /> A. Provide finishes complying with BHMA A156.18. All exterior hardware US32D. All interior <br /> hardware US 32D or US 26D. <br /> B. Protect mechanical finishes on exposed surfaces from damage by applying a strippable, <br /> temporary protective covering before shipping. <br /> C. Appearance of Finished Work: Variations in appearance of abutting or adjacent pieces are <br /> acceptable if they are within one-half of the range of approved Samples. Noticeable <br /> variations in the same piece are not acceptable. Variations in appearance of other <br /> components are acceptable if they are within the range of approved Samples and are <br /> assembled or installed to minimize contrast. <br /> DOOR HARDWARE 087100 - 8 <br />