3107 COLBY AVE 2021-03-31 - Laserfiche WebLink

i EVERETT HOUSING AUTRORITY EVERETT, WA Administrative Office Upgrades January 13, 2020 1. Key Control Cabinet: Tag keys and place them on markers and hooks in key control system cabinet, as determined by final keying schedule. 2. Key Control System Software: Set up multiple-index system based on final keying schedule. E. Stops: Provide wall stops for doors unless wall or other type stops are indicated in door hardware schedule. Do not use floor stops. F. Perimeter Gasketing: Apply to head and jamb, forming seal between door and frame. 1. Do not notch perimeter gasketing to install other surface-applied hardware. G. Door Sweeps: Apply to bottom of door, forming seal with threshold when door is closed. 3.4 ADJUSTING A. Initial Adjustment: Adjust and check each operating item of door hardware and each door to ensure proper operation or function of every unit. Replace units that cannot be adjusted to operate as intended. Adjust door control devices to compensate for final operation of heating and ventilating equipment and to comply with referenced accessibility requirements. 1. Door Closers: Adjust sweep period to comply with accessibility requirements and requirements of authorities having jurisdiction. 3.5 CLEANING AND PROTECTION A. Clean adjacent surfaces soiled by door hardware installation. B. Clean operating items as necessary to restore proper function and finish. C. Provide final protection and maintain conditions that ensure that door hardware is without damage or deterioration at time of Substantial Completion. 3.6 MAINTENANCE SERVICE A. Maintenance Tools and Instructions: Furnish a complete set of specialized tools and maintenance instructions for Owner's continued adjustment, maintenance, and removal and replacement of door hardware. 3.7 DEMONSTRATION A. Train Owner's maintenance personnel to adjust, operate, and maintain door hardware. DOOR HARDWARE 087100 - 10