Laserfiche WebLink
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 <br /> Design Load Calculation Summary MECH-LOAD-CALC <br /> 2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2& R3 over 3 stories and all RRevised January 2017 <br /> Project Title: El Parasio 2801 Colby Date 4/2/2019 <br /> For Building Dept. Use <br /> The following information shall be included in the load calculation program summary submitted with <br /> the permit documents. If a load calculation summary is not available, provide the required information <br /> below. <br /> Heating Design Cooling Design <br /> Load in Btu/h(Note Load in Btu/h(Note Calculation Method <br /> Equip. ID Area(s)Served 1) 1) (Note 2) Notes <br /> 3 ton Resturant 81,000 36,000 Existing units old units sufficent <br /> 4 ton Resturant 81,000 48,000 Existing units old units sufficent <br /> 5 ton Resturant 81,000 60,000 Existing units old units sufficent <br /> Note 1-Design load shall account for the building envelope, lighting, ventilation and occupancy loads of the space(s)served by the <br /> mechanical system.Heating and cooling loads shall be adjusted to account for load reduction achieved by an energy recovery <br /> system,if applicable. <br /> Note 2-Computer load calculation program, worksheet(identify source), or equivalent computation procedure in accordance with ASHRAE <br /> Standard 183. <br />