|
ELECTRICAL SPECIFICATIONS GENERAL NOTES
<br /> PART,-GENERAL QA �
<br /> 1, THE ELECTRICAL DRAWINGS,SPECIFICATIONS AND GENERAL NOTES •�•� -\�
<br /> DESCRIBE THE RECOMMENDED SCOPE OF WORK AND THE DOCUMENTS
<br /> 1.01 COORDINATIONOF TRADES:SCHEDULE AND COORDINATE WORK WITH THAT OF OTHER DIVISIONS AND SECTIONS, SHALL BE USED FOR THE PURPOSE OF BIDDING,BUILDING DEPARTMENT
<br /> 1.02 GUARANTEE IN WRITING THE NERAGELECTRICAL NSTASLATK)N,AND ALL WORK UNDER THIS SECTION,FOR A PERIOD OF ONE YEAR FROM THE DATE REVIEW,AND TO SECURE THE NECESSARY CONSTRUCTION PERMIT ONLY. HAP �
<br /> OF FINAL ACCEPTANCE BY THE OWNER AGAINST ALL EVIDENCE OF IMPERFECT WORKMANSHIP OR FAILURE OR MALFUNCTION OF MATERIALS.
<br /> 2. BRANCH LACONTROL CONTRACTOR
<br /> MAY NOT BE INDICATED ON � '.
<br /> PART2•PRODUCTS THESE PLANS.CONTRACTOR IS RESPONSIBLE TO COMPLETE THE BRANCH 0 , --
<br /> CIRCUIT WIRING IN ACCORDANCE WITH PLAN NOTES AND AS PERMITTED BY
<br /> 2.01 MATERWS AND EQUIPMENT AUTHORITY.CONTRACTOR SHALL SUBMIT AS-BULT DRAWINGS AS A PART OF ^^ .'�
<br /> A. MATERIAL FURNISHED UNDER THIS CONTRACT.UNLESS OTHERWISE NOTED.SHALL BE NEW,FREE FROM DEFECTS AND SHALL RECORD DRAWING SUBMITTAL TO ARCHITECT AND AUTHORITY HAVING l•
<br /> CONFORM WITH THE STANDARDS OF UL. JURISDICTION(ARIA
<br /> B. VOLTAGE.AMPERE,AND OTHER RATINGS OF EQUIPMENT SHALL BE SUITABLE FOR USE INTENDED.DISCONNECT SWITCHES SHALL ��4{, - '�•
<br /> BE PROPERLY HORSEPOWER RATED AND SUITABLE FOR VOLTAGE.AND AMPERE RATING OF LOAD 3. ELECTRICAL INSTALLATION SHALL COMPLY WITH THE LOCALLY ADOPTED,AS ' n Y,`�
<br /> C. THE DRAWINGS GENERALLY INDICATE THE RACEWAY SIZE,THE NUMBER.SIZE,AND INSULATION TYFE OF CONDUCTORS TO BE NATIONAL ELECTRICAL CODE ADAPTED BY THE JURISDICTION AND ANY Vt G A PROVIDED AND INSTALLED.WHERE THESE ITEMS DO NOT MEET MINIMUM APPLICABLE CODES.FOR EQUIPMENT BEING SERVED. LOCAL SUPPLIMENTS.
<br /> COMPLY AS REQUIRED AT NO ADDITIONAL COST.
<br /> 2.02 RACEWAYS 4. ALL EQUIPNCNTSHOWN IS NEW,CONTRACTOR FURNISHED AND INSTALLED.
<br /> •
<br /> A. GALVANIZED RIGID CONDUIT(GRE):INCLUDING ELBOWS AND COUPLINGS. UNLESS OTHERWISE NOTED.IF CONTRACTOR PROPOSED TO SUBSTITUTE PANDA RESTAURANT GROUP INC.
<br /> B. INTERMEDIATE METAL CONDUIT(IMCE INCLUDING ELBOWS AND COUPLINGS. SPECIFIC EQUIPMENT SPECIFIED,HE SHALL SUBMIT HIS REQUEST FOR
<br /> C. ELECTRIC METALLIC TUBING(EMT)WITH FITTINGS OF PRESSED STEEL OR MALLEABLE IRON,COMPRESSION TYPE WITH INSULATED CONSIDERATION TO THE OWNER AND ENGINEER PRIOR TO THE ND IN iITIN GAve.
<br /> THROATS. WRITING.ALL SUBSTTONSMUST BE REVIEWED BY THE ENGINEER.SUCH Rosemead.CaliforniaBIBani
<br /> D. RIGID NONMETALLIC CONDUIT:(PVC)U.L LABELED SCHEDULE40 P.V.C. REVIEW SHALL NOT RELIEVE THE CONTRACTOR FROM COMPLYING WITH THE 91770
<br /> 2.03 DEVICE AND JUNCTION BOXES:INCLUDE PLASTER RINGS.COVERS.AND KO SEALS AS REQUIRED. REQUIREMENTS OF THE DRAWINGS AND SPECIFICATIONS.THE CONTRACTOR TBIBpMRIR026.799.9898
<br /> 2.04 WIRE AND CABLE:UNLESS OTHERWISE NOTED.WIRE AND CABLE SHALL BE SOFT DRAWN,MINEALED COPPER WIRE SIZES NO.8 AND LARGER SHALL BE RESPONSIBLE AT HIS OWN EXPENSE FOR ANY CHANGE RESULTING
<br /> AND CONDUCTORS SERVING MOTORS AND SUBJECT TO VIBRATIONS SHALL BE STRANDED CABLE INSULATION TO BE THWNRHHN,JACKETED FROM HIS PROPOSED SUBSTRIONS WHICH AFFECT OTHER PARTS OF HIS FecainAe:6Zb.372S2B8
<br /> 90C INSULATED WIRE.PROVIDE WIRE COLOR IDENTIFICATION:NEUTRAL WIRE-WHITE,LIVE WIRE-BLACK,RED,BLUE ON 120/208 VOLT OWN WORK,OR SUBSTITUTIONS WHICH AFFECT OTHER PARTS OF HIS OWN
<br /> SYSTEM NEUTRAL WIRE-GREY,LIVE WIRE-BROWN,ORANGE YELLOW ON 277/480 VOLT SYSTEM,GROUND-GREEN. WORK OR THE WORK OF OTHER CONTRACTORS.
<br /> 2.05 ADDED PANELS TO BE PANELBOARDS-LOAD CENTERS ARE NOT ACCEPTABLE UNLESS SPECIFICALLY APPROVED.
<br /> 2.08 SERVICE ENTRANCE AND DISTRIBUTION GEAR BYG.E.,SQUARE V.CUTLER HAMMER/SIEMENS ONLY.NIERIORPMELBOARDS SHALL BE 5. THE ELECTRICALDRAWNGS,CONDUIT RUNS,WIRING AND ELECTRICAL AI Woe,M19sa.eaaMPm mE Wm MAsaUEN
<br /> RECESSED WITH FLANGED/REMOVABLE SCREW-ON COVER SURFACE MOUNTED PANELBOARDS OR HINGED/FLUSH COVERS NOT ALLOWED. INFORMATION ARE DIAGRAMAATC ONLY.DO NOT SCALE THE ELECTRICAL TIBIIW,by Its Swig ma M;awry a1 Panne
<br /> 2.07 SWITCHBOARDS:COPPER BUSSING WITH FULL CAPACITY NEUTRAL.ALUMINUM ALLOWED WHEN APPROVED BY ARCHITECT, DRAWINGS TO DETERMINE THE LOCATION OF EQUIPMENT OR OUTLETS. MC CABLE SHALL NOT BE USED. PREWIRED MC CABLE WHIPS FROM ESN.M.AN were NNW Se we on WAN.*PNML
<br /> P
<br /> 2.11 120/208 VOLT AND277/480 VOLT PANELBOARDS:3 PHASE.4 WIRE.COPPER BUS,COMPOSED OF AN ASSEMBLY OF BOLT-IN- ACE MOLDED CASENowdtless Nem emigres." Her Flans may be
<br /> CIRCUIT BREAKERS wail THERMAL AND MAGNETIC TRIP AND MVP FREE POSITION SEPARATE FROM EITHER ON OR OFF POSITIONS. 6. REFER TO THE ARCHITECTURAL REFLECTED CEILING PLAN FOR EXACT axed lTa Eto an/pars,Am,v4WaNlon
<br /> 2.13 SAFETY SWITCHES:FUSED.HEAVY DUTY,HORSEPOWER RATED. LOCATIONS OF ALL LJGHTING FIXTURES.CEILING MOUNTED OUTLETS AND LIGHTING FIXTURES ARE ACCEPTABLE WHEN SUPPLIED WITH THE „; A,,,,,8,,,,,,,,in,,,a(P,,,, ,nt,
<br /> 2.14 STARTERS.CONTACTORS AND CONTROL DEVICES:PROVIDE AS SHOWN AND AS REQUIRED BY CODE,FURNISH COMPLETE WITH PILOT LIGHTS. EQUIPMENT. FIXTURE AND NO LONGER THAN 7Z'.
<br /> AUXILIARY CONTACTS,PUSH BUTTONS.HAND-OFFHAND-OFFHAND-OFF-ON SWITCHES,CONTROL DEVICES.AND OVERLOAD RELAYS.THERMAL OVERLOADS TO BE
<br /> SIZED PER MANUFACTURERS RECOMMENDATIONS,AMBIENT COMPENSATE ALL HEATERS EXPOSED TO HIGH TEMPERATURE OR INSTALLATION 7. ALL DEVICE MOUNTING HEIGHTS AND EXACT LOCATIONS SHALL BE
<br /> OUTSIDE. COORDINATED WITH ARCHITECTURAL DRAWINGS AND ELEVATIONS PRIOR TO REVISIONS:
<br /> 2.18 NAMEPLATES:PROVIDE BLACK LAMICOD NAMEPLATES WITH 3/18•HIGH WHITE ENGRAVED LETTERS ON PANELS.SWITCHBOARDS.MAINS AND ROUGH-IN.
<br /> SUBMAINS,DISTRIBUTION EQUIPMENT.REMOTE SAFETY SWITCHES,CIRCUIT BREAKERS,TIME SWITCHES,CONTACTORS.AND STARTERS.
<br /> 2.17 IMRINGDEVICES 8, R SHALL BE THE CONTRACTORS RESPONSIBILITY TO VERIFY TYPES OF ELECTRICIAN TO PROVIDE STAINLESS STEEL COVER PLATES FOR
<br /> A HUBBELL OR COMPARABLE LEVITON OR BRYANT:WHITE AND GREY IN COLOR-AS NOTED ON DRAWINGS.15 AMP DEVICES ALLOWED CEILING SYSTEM FIXTURES LOCATED IN DAMP OR WET LOCATIONS SHALL BE l_
<br /> ONLY WHEN SPECIFICALLY DENOTED ON ELECTRICAL CONSTRUCTION DRAWINGS. USTED AND LABELED FOR USE IN SUCH LOCATIONS. ALL LOW VOLTAGE JUNCTION BOXES.
<br /> a TOGGLE SWITCHES:SINGLE POLE-HUBBELL 1221-20A,120277V,THREE WAY.HUBBELL 1223-20A.120/277V,FOUR WAY-HUBBELL
<br /> 1224-20A 120277V. 9. ALL RECESSED LIGHTING FIXTURES,PANELBOARDS,SWITCHES,ETC.
<br /> C. RECEPTACLES:DUPLEX GROUNDING TYPE.SPECIFICATION CRATE 125 VOLT,20 AMPERES,SINGLE PHASE,HUBBELL NO.5262 OR MOUNTED IN FIRE RATED STRUCTURES SHALL BE ENCLOSED WITH AN
<br /> COMPARABLE- APPROVED ENCLOSURE CARRYING THE SAME FIRE RATING AS THE
<br /> •
<br /> D. GROSINGLEDPHASE?5rMGROUND TRIP INTERRUPTER E FEEDTHROUGHHACLE CONNSSTGRUC OUNDING TYPE,sPEaFlcnnoNGRADE.lzs VOLT.20M.HPEREs, STRUCTURE. NO UNDER SLAB ELECTRICAL WORK ALLOWED UNLESS OTHERWISE L
<br /> 2.18 DEVICE PLATES:EX LAN(STA.KLEEN),SMOOTH FINISH IN STAINLESS STEEL AND WHITE-AS NOTED ON PLANS.MULTAGANG OUTLET PLATES 10.PORTIONS OF THE CEILING SYSTEMS MAY BE INACCESSIBLE.THEREFORE, MMIMIN
<br /> LA
<br /> - - --
<br /> SHALL BE USED FOR MULTI-GANG BOXES. THE CONTRACTOR SHALL STRATEGICALLY LOCATE ACCESS BOXES,ETC., NOTED ON PLAN.
<br /> 2,19 NOT USED. WHICH SHALL BE READILY ACCESSIBLE.ALL LIGHTING FIXTURE WIRING,
<br /> 2,2D LIGHTING FIXTURES BALLASTS,J-BOXES.ETC.SHALL BE ACCESSIBLE FROM FIXTURE OPENING.
<br /> A. PROVIDE FIXTURES PER SCHEDULE NTH ALL PARTS INCLUDING PLASTER FRAMES FOR RECESSED FIXTURES AND FITTINGS ISSUE DATE:
<br /> NECESSARY TO COMPLETELY AND PROPERLY INSTALL.FIXTURES. 11.ALL WIRING AND ELECTRICAL EQUIPMENT INSTALLED FOR MECHANICAL AND
<br /> B. LAMPS:INCANDESCENT LAMPS BY GE,.SYLVANIA OR WESTINGHOUSE,130 VOLT.EXTENDED LIFE LAMPS.FLUORESCENT LAMPS BY PLUMBING EQUIPMENT SHALL BE IN ACCORDANCE WITH MECHANICAL AND
<br /> G.E„SYLVANIA,PHILLIPS.OR WESTINGHOUSE,MINIMUM CRI OF80,WATTAGE AND TYPES AS REQUIRED BY FIXTURE. PLUMBING SPECIFICATIONS AND ASSOCIATED DRAWINGS.CONTRACTOR
<br /> SHOULD OBTAIN THE REQUIRED MECHANICAL AND PLUMBING DRAWINGS MID
<br /> PART 3-EXECUTION PROVIDE ALL EQUIPMENT.RACEWAYS,WIRING,ETC.,AS INDICATED THEREON
<br /> 3.01 GENERAL INSTALLATION AS PROVIDED UNDER THE ELECTRICAL WORK.
<br /> A. THE ENTIRE ELECTRICAL INSTALLATION SHALL BE MADE INANEAT,APPROVED.FINISHED,AND SAFE MANNER 12.ALL FINAL CONNECTIONS TO OWNER FURNISHED EQUIPMENT SHALL BE MADE ELECTRICAL SYMBOLS LIST
<br /> B. INSPECT AND MAKE TIGHT ALL CONNECTIONS FOR ALL EQUIPMENT,INCLUDING FACTORY CONNECTIONS.TORQUE ALL BY THE CONTRACTOR,UNLESS OTHERWISE NOTED.VERIFY ELECTRICAL
<br /> CONNECTIONS PER MANUFACTURERS RECOMMENDATIONS. CHARACTERISTICS AND UL LISTING PRIOR TO CONNECTION.
<br /> C. LIGHTING FIXTURES INSTALLED AND USED FOR LIGHTING DURING CONSTRUCTION SHALL BE RELAMPED WITH NEW LAMPS JUST NOTE:ALL DIMENSIONS GIVEN ARE TO DEVICE CENTERLINES.CONTRACTOR TO COORDINATE ALL INSTALLATIONS.
<br /> PRIOR TO FINAL ACCEPTANCE OF THE PROJECT. 13.THE CONTRACTOR SHALL VERIFY THE LOAD INPUT VOLTAGE OF ALL
<br /> D. INSTALL SEISMIC RESTRAINT DEVICES FOR ALL CEILING MOUNTED EQUIPMENT.LE,FLUORESCENT LAY-IN FIXTURES.PROVIDE GRID EQUIPMENT PRIOR TO INSTALLATION.ACCEPTING ANY EQUIPMENT POWER DISTRIBUTION RECEPTACLES&COMMUNICATIONS OUTLETS
<br /> CUPS AND F12 SLACK WIRES FROM FIXTURE CORNERS TO STRUCTURE. RESULTING IN A LOAD INCREASE SHALL BE THE RESPONSIBILITY OF
<br /> 3,02 RACEWAYS CONTRACTOR PANELBOARD DUPLEX CONVENIENCE OUTLET,20A 125V,MTD 618'AF.F.U.N.O.
<br /> A. INSTALL COMPLETE RACEWAY SYSTEMS FOR ALL ELECTRICAL CONDUCTORS INCLUDING TELEPHONE,SIGNAL,CONTROL,AND S N SINGLE-POLE SWITCH,MANUAL MOTOR STARTER DRAWN BY:
<br /> OTHER SYSTEMS. 14.ELECTRICAL OUTLETS ON OPPOSITE SIDES OF FIRE RATED WALLS AND Q. J-MOX(WITH FLEX CONNECTION TO EQUIPMENT.) (IM SIMPIFJ(CONVE OUTLET,20P,125V,MTD618'AFTE U.N.O.
<br /> B UNLESS OTHERWISE NOTED,INSTALL ALL RACEWAYS CONCFAA FT,WHERE IT IS NOT FEASIBLE TO CONCEAL RACEWAYS,INSTALL PARTITIONS MUST BE SEPARATED BY DISTANCE OF 24 IN.HORIZONTALLY.IN NP DUPLEX CONVENIENCE OUTLET MOUNTED 3•ABOVE COUNTERTOP
<br /> AS DIRECTED BY ARCHITECT. ACCORDANCE WITH LB.C,SEC.711,32.OPENINGS IN FIRE RATED WALLS ❑' DISCONNECT SWITCH,WITH RATING AS SHOWN ON PLANS BACKSPLASH OR APPROXIMATELY 44'A.F.F,
<br /> C. INSTALL EXPOSED RACEWAYS TO RUN PARALLEL OR AT RIGHT ANGLES TO STRUCTURAL BUILDING LPESWITH PEAT BENDS AND GREATER THAN 18 SQ.IN.MUST BE FIRE STOPPED. ®+ COMBINATION DISCONNECT SWITCH/MOTOR STARTER FURNISHED BY .1, GEC!DUPLEX CONVENIENCE OUTLET.20A 125V,51M TRIP,MTD 618' PANDA PROJECTS 109E
<br /> NEATLY OFFSET INTO TERMINATIONS. ••
<br /> D. IN EMPTY RACEWAY PROVIDE A INSTALL A NO.14 NYLON DRAG LINE 15.PROVIDE AN ADDITIONAL JUNCTION BOX AS REWIRED)WHERE THE ELECTRICAL CONTRACTOR.
<br /> AND
<br /> E INSTALL RACEWAYS WITHAPPROVED HEAVYDUTY SUPPORTS,STRAPS,HANGERS,CONNECTORS,AND COUPUNGS AS REQUIRED NUMBER OF CONDUCTORS EXCEEDS THE MAXIMUM ALLOWED FOR A GIVEN /IBA\ BRANCH CIRCUITRY CONCEALED IN WALL.ORCEILNG WITH M ARCH PROJECT#:
<br /> TO MAINTAIN AN APPROVEDINSTALLATION. JUNCTION POINT OR OUTLET. ADDITIONAL*12 INSULATED GND,UN.O,HACHURES INDICATE NUMBER W GEC!DUPLEX
<br /> TERTOFCONVENIENCE OUTLET MOUNTED 3'ABOVE
<br /> F. DO NOT INSTALL CONDUIT RACEWAYS IN CONCRETE SLABS, OF CURRENT CARRYING CONDUCTORS.'X'INDICATES ADDITIONAL COUNTERTOP BACKSPIASH OR APPROXIMATELY 44'AF.F.
<br /> H. MINIMUM CONDUIT SIZE TO BE 3/C U.N.O 16.CONDUCTORS SHALL BE COPPER THHWIHWN 600 VOLT INSULATION UNLESS INSULATED.ISOLATED GROUND CONDUCTORS. V TELEPHONE OUTLET.PROVIDE FLUSH J.BOX6+18'AFF OILOW!I'
<br /> 3,03 GALVANIZED RIGID CONDUIT(GRC)ALL RACEWAYS SHALL BE GRC EXCEPT AS NOTED OR SHOWN.CONDUIT.ELBOWS.STANDARD COUPLINGS OTHERWISE NOTED.USE PROPER TEMPERATURE RATING OF CONDUCTORS ."ltti BRANCH CIRCUITRY HOMERUN TO PANEL AS NOTED ON PLANS CONDUIT WI PULL WIRE TO MANAGERS STATION.W SUBSCRIPT
<br /> SHALL BE HOT DIPPED GALVANIZED RIGID STEEL,IF PARTITIONS OR WALLS ARE SOLID CONCRETE OR ARE GROUTED SOLID WITH CONCRETE BASED ON THE AMBIENT AIR TEMPERATURE WHERE CONDUCTORS ARE INDICATES WALL PHONE AT 54'AFF.
<br /> OR MORTAR. RIGID STEEL CONDUIT SHALL BE USED, BEING USED.HIGHERAMPACITY CONDUCTOR AND LARGER RACEWAY SHALL ---` INDICATES EXTERIOR UNDERGROUND WIRE RUNS_
<br /> 3.04 INTERMEDIATE METAL CONDUIT(AMC)IMC RACEWAY AND APPROVED FITTINGS WHERE PERMITTED BY APPLICABLE CODES AND REGULATIONS BE PROVIDED TO OFFSET THE AMPACITY CORRECTION FACTORS AS V DATA OUTLET,PROVIDE FLUSH J-BOX6+16'A.F.F.U,N,O WI -fi GAILY WANG
<br /> MAY BE USED IN LIEU OF RIGID STEEL CONCUR,WHERE INSTALLED ABOVE FINISH GRADE AND ABOVE CONCRETE SLABS ON GRADE. INDICATED IN NEC TABLE 310 AND ELSEWHERE IN CODE. CONDUIT WITH PULL WIRE TO MANAGERS STATION.
<br /> 3,05 ELECTRIC METALLIC TUBING(EMT)EMT MAY BE USED WHERE CONCEALED IN AREAS ABOVE CEILINGS.FURRED SPACES,PARTITIONS OR LIGHTING&LIGHTING CONTROLS _r 4
<br /> WALLS,ALSO MAY BE EXPOSED,WHEN NOT IN HAZARDOUS AREAS,AREAS SUBJECT TO PHYSICAL DAMAGE,OR WHEN DIRECTLY EXPOSED TO 17.ALL FLUORESCENT BALLASTS AND LAMPS SHALL BE CALIFORNIA ENERGY LIGHTING FIXTURE,SUBSCRIPT LETTER DENOTES FIXTURE TYPE AS 7 UNA)W)3"CNDUITWTH PILL IRO VIDEFAGESSTATlON AFF 1 &ASSOCIATES,INC.
<br /> RAIN OR WASH-DOWN. COMMISSIONICEC)CERTFED ENERGY SAVING TYPE. DESCRIBED IN LIGHT FIXTURE SCHEDULE. U.N.O W/t•CONDUIT WITH PULL WIRE TO MANAGER'S STATION.
<br /> 3.06 FLEXIBLE METAL CONDUIT(FLEX)USE FLEXIBLE CONDUITS FOR CONNECTIONS TO MOTORS,WHERE SUBJECT TO MOVEMENT OR VIBRATION. 17 LtT.V.SYSTEM DATA OUTLET.PROVIDE FLUSH}BOX +18'AF.F.EMS °M^y'p°'Hu Hu lA sulA.uo
<br /> AND LIQUID TIGHT WHERE EXPOSED TO MOISTURE OR OIL 18.DO ALL DRILLING.CUTTING,CHANNELING AS REQUIRED FOR ELECTRICAL SINGLE-POLE SWITCH 644•A.F.F.U.N.O.LOWER CASE LETTER W/1'CONDUTT WITH PULL WIRE TO MANAGERS STATION.WHEN
<br /> o00
<br /> 3.07 RIGID NONMETALUC CONDUIT PVC SCHEDULE 40 MAY BE INSTALLED FOR DIRECT BURIAL RACEWAYS WHERE INSTALLED WITH MINIMUM WORK AND INDICATED OR HEREIN SPECIFIED.ALL HOLES.CURBS,ETC..N S ° DENOTES FIXTURE CONTROL.300V.20A TEL:(62i)2ee-aaee FAA:1105)76a'IIEl
<br /> COVERAGE PER NEC TABLE 300-0 FLOORS,CEILINGS AND WALLS SHALL BE PATCHED.UNLESS INDICATED SHOWN ADJACENT RECEPTACLE,MOUNT AT RECEPTACLE HEIGHT. nnv;//xxv.e°OxmN.mm
<br /> 3.08 OUTLET,PULL AOTHERWISE.JUNCTION BOXES PAINT ALL EXPOSED ELECTRICAL RACEWAYS.CABINETS. S a TWO-POLE SWITCH 64CAF.F.U.N.O.LOWERCASE LETTER REFER TO RECEPTACLE FOR MOUNTING HEIGHT.
<br /> -
<br /> A. UNLESS OTHERWISE SHOWN OR AS DIRECTED PRIOR TO INSTALLATION,OUTLET BOXES SHALL GENERALLY NE PLACED AT TIE ENCLOSURES AND FITTING TO MATCH IN COLOR TO ADJACENT SURFACES IN DENOTES FIXTURE CONTROL,300V,20A ® SPECIAL PURPOSE RECEPTACLE MM.6 IRA.PF.U.N.O..AMPERAGE
<br /> FOLLOWING HEIGHTS.CENTER OF BOX TO FINISHED FLOOR LEVEL. FINISHED AREAS.(PROTECT UL USTINGS LABELS FROM PAINT). AND PHASE AS NOTED ON PLANS,NEMA CONFIGURATION AS REQT.
<br /> B. WALL SWITCHES:M, S p SINGLE-POLE LIGHT SWITCH WITH PILOT LIGHT 644'AF.F.U.ND,300V.
<br /> C. CONVENIENCE RECEPTACLES:18•(OR 4•ABOVE COUNTERS)AND/OR AS NOTED.(SIMILAR TYPE OUTLETS SHALL BE MOUNTED AT 19.SEAL ALL PENETRATIONS THROUGH FIRE RATED WALLS,CEILINGS,FLOORS. 20A. 41 ISOLATED GROUND DUPLEX CONVENIENCE OUTLET(ORANGE).
<br /> SAME HEIGHT IN EACH AREA).GROUNDING PIN AT TOP. ETC.,TO MMNTMN THE FIRE RATING.FURNISH AND INSTALL FIRE RATED SO OCCUPANCY SENSOR SWITCH WITH OFF CONTROL,AND ADJUSTABLE 20A.,125V.,MTD 6+IS ARE
<br /> • 3.09 CONDUCTORS(COPPER ONLY) ENCLOSURE FOR ALL EQUIPMENT PENETRATING INTO FIRE RATED SETTINGS FOR TIME OFF DELAY,FOOTCMDLE LEVEL AND MASKING. $ DOUBLE DUPLEX CONVENIENCE OUTLETS UNDER COMMON COVER A USE SPECIFIED COLOR SCHEDULE FOR ALL WIRING.WHERE LARGE CONDUCTORS ARE NOT AVAILABLE IN COLORS.IDENTIFY WITH • ENVELOPS,SPACES ETC. 'WATTSTOPPER OR EQUAL,MOUNT AT44'AF.F,U.N.O.USE PW.100 FOR
<br /> PERMANENT COLORED TAPE AT ALL TERMINATIONS,JUNCTION BOXES,ETC.COLOR CODING PER NEC. OFFICES/CONE/ETC..W I-200 FOR CLASSROOMSILARGE ROOMS/ETC.
<br /> B. MAKE TOPS,JOINTS.SPUCES.AND OTHER CONNECTIONS WITH FIXTURE CONNECTORS. 20,EMERGENCY LIGHTING SHALL BE PROVIDED PER U,BC.AND SHALL BE 0 ISOLATED DOUBLE DUPLEX CONVENIENCE OUTLETS(ORANGE)
<br /> C. DO NOT INSTALL WIRING OR PULL WIRES,IN RACEWAYS UNTIL RACEWAY SYSTEM IS COMPLETE,CLEAN AND DRY AND FREE OF ALL DESIGNED TO PROVIDE MINIMUM REQUIRED FOOTCANDLES AND LUMENS. CEILING MOUNT DUAL TECHNOLOGY ULTRASONIC/P.I.R.MOTION 20A,125V.
<br /> FOREIGN MATERIALS.LUBRICATE AS REQUIRED WITH SPECIFIED LUBRICANT. PROVIDE ADDITIONAL EMERGENCY ILLUMINATION AS REQUIRED BY IA SENSOR TO CONTROL POWER TO ROOM SWITCHES-WATTSTOPPER
<br /> D. MINIMUM CONDUCTOR SIZE TORE N12 CU.THWN. INSPECTION AUTHORITIES HAVING JURISDICTIONS. SOT300(WITH POWER PACK)OR EQUAL ® SPEAKER
<br /> 3,10 UGFHliNG FIXTURES
<br /> A LEAVE FIXTURES AND LAMPS CLEAN OF ALL DIRT,DUST,GREASE SPOTS AND DEBRIS AND ALLC ABS,PLASTIC AND OTHER 21,ALL ELECTRICAL EQUIPMENT SHALL BE BRACED OR ANCHORED TO RESISTA ABBREVIATIONS FIRE ALARM
<br /> COMPONENTS.UNSCRATCHED AND UNBROKEN. HORIZONTAL FORCE ACTING IN ANY DIRECTION USING THE FOLLOWING
<br /> B. FR AND ADJUST ALL FIXTURES.WHERE STRUCTURAL CONDMONS,PARTITIONS.FURNITURE,SHELVING,AND AIR CONDRIONING CRITERIA.(NON AEALTH CARE FACILITY INCLUDE OSHRD NOTES FOR HEALTH A AMPERES M.C.B. MAN CIRCUIT BREAKER
<br /> DIFFUSERS INTERFERE WITH THEWHTING FIXTURESG AT LOCATIONS SHOWN.NOTIFY ARCHITECT IN WRITING AND RELOCATE AT NO CARE FACILITY] AL ALUMINUM M.L.O. MAN LUGS ONLY E MANUAL PULL STATION WITH KEYED RESET,MOUNT UNIT AT 44•AF.F.
<br /> ADDITIONAL COST AS DIRECTED. FIXES EQUIPMENT ON GRADE 33%OF A.F.F. ABOVE FINISHED FLOOR MID. MOUNTED•
<br /> • � ALIGN WITH LIGHT SWITCH IF APPLICABLE.
<br /> C. FUTURES WITH FINISH TRIM OR LENS FRAMES SHALL BEGASKETED AND BAFFLED TO PREVENT UGHT LEAKS.INSTALL SO THAT NO OPERATING WEIGHT A.F.G. ABOVE FINISHED GRADE P. POLE - LJ XENON STROBE UNIT MOUNTED ATBO'A,F,F.OR 6•BELOW GEEING •
<br /> LIGHT LEAKS EXIST.D.FACTURES MOUNTED DIRECTLY ON COMBUSTIBLE LOW-DENSITY CEILINGS SHALL BE UL APPROVAL FIXED EQUIPMENT ON STRUCTURE 50%OF C. CONDUIT SW. SWITCH
<br /> FOR THIS CONDITION AND BE PLAINLY MARKED SO INDICATING. OPERATING WEIGHT CIB CIRCUIT BREER T.M.B. TELEPHONE MOUNTING BOARD (WHICHEVER IS LOWER).MUST MEET OR EXCEED RDA.
<br /> AR
<br /> REQUIREMENTS. PANDA EXPRESS
<br /> 3.11 GROUNDING EMERGENCY POWER AND COMMUNICATIONS EQUIPMENT CU. COPPER TYP. TYPICAL
<br /> Aq GROUNDING FOR DISTRIBUTION EQUIPMENT,EQUIPMENT AND MATERIALS WTH ELECTRICAL CONNECTIONS,ELECTRIC MOTOR ON GRADE: 50%OF DISC. DISCONNECT U.N.O.0 UNLESS NOTED OTHERWISE LJ COMBINATION XENON STROBE M C D HORNHIME UNIT MOUNTED AT
<br /> FRAMES,ELECTRIC RACEWAY AND RELATED EQUIPMENT,SHALL BE EFFECTIVELY AND PERMANENTLY GROUNDED IN OPERATING WEIGHT F. FUSE V. VOLTS 80'A.F.F.ORB'BELOW CEILING(WHICHEVER IS LOWER).UNIT MUST CHULA VISTA CROSSING
<br /> ACCORDANCE WITH PERTINENT SECTIONS OF ARTICLE 2500F NEC.RESISTANCE TO GROUND SHALL NOT EXCEED 100HMS. EMERGENCY POWER AND COMMUNICATION ON GFI GROUND FAULT W. WIRE MEET OR EXCEED ADA REQUIREMENTS. 1820 MAIN CT
<br /> B ALL RACEWAYS SHALL HAVE AN APPROVED SIZED,INSULATED,STRANDED COPPER GROUNDING TYPE CONDUCTOR. STRUCTURE 75%OF CURRENT INTERRUPTER W.P. WEATHERPROOF
<br /> CND
<br /> C. WHERE RACEWAYS CONNECT TO CONCENTRIC K.O.PROVIDE GROUNDING LOCKNUT OR BUSHING AND BOND WIRE EXTENDED AND OPERATING WEIGHT H.V. GROUND HORSE POWER XOFMR TP EORMER �1 FIRE ALARM CONTROL PANEL MOUNT TOP OF UNIT AT T2'AF.F. CHULA VISTA,CA 91911
<br /> BONDED TO ENCLOSURE SIZE AS PER NEC.
<br /> 3.12 DITCHING,EXCAVATION AND BACKFNG:PERFORM ALL DITCHING,EXCAVATION AND BACKFILLING REQUIRED FOR THE ELECTRICAL WORK. FOR FLWBLE MOUNTED EQUIPMENT USE 2 X THE ABOVE VALUES. M 1000 1--1 FIRE ALARM ANNUNCIATION PANEL.MOUNT TOP OF UNITAT I2 AF.F.
<br /> DJ
<br /> PROVIDE AND MAINTAIN ALL SHEATHING,BRACING AND PROPER GUARDS FOR PREVENTION OF ACCIDENTS, SIMULTANEOUS VERTICAL FORCE-USE 1/3 X HORIZONTAL FORCE. {j PHOTO ELECTRIC TYPE SMOKE DETECTOR.
<br /> 3.13 UTILITY COMPANY SERVICE CONTRACTOR TO BE RESPONSIBLE FORCOORONATNG AND PROVIDING REQUIRED WORK FOR SUPPLYING
<br /> ELECTRICAL POWER AND COMMUNICATIONS UTILITIES TO THE PROJECT, CONDUIT,BUSDUCT,CABLE TRAY.WIREWAYS,ETC.,SHALL BE BRACED IN C. DUCT MOUNTED PHOTO ELECTRIC SMOKE DETECTOR.
<br /> 3,14 FINAL INSPECTION TESTS TESTSYSTEM FOR SHORTS AND GROUNDS.FAULTY WIRING SIALLL BE REMOVED AND REPLACED,AFTER SYSTEM IS ACCORDANCE WITH'GUILDELINES',PUBLISHED BY SMACRA AND PPM. 0 RATE OF RISE HEAT DETECTOR.
<br /> CONNECTED COMPLETE.TEST FOR INSULATION RESISTANCE.RESISTANCE LOWER THAN OUTLINED IN THE NEC,MANUFACTURERS DATA,ETC..
<br /> SHALL BE REMOVED AND REPLACED.ANY DEVICE.APPARATUS OR FIXTURE UNDER THIS CONTRACT SHOWING SUBSTANDARD READINGS SHALL NOTICE 000
<br /> BE REMOVED AND REPLACED AS DIRECTED BY THE ARCHITECT. THESE DRAWINGS ARE SUBJECT TO AN APPROVAL OF THE BUILDING
<br /> 3,15 LABEL ALL RECEPTACLES WITH 3/1EHO1.1 BLACK LETTERING ON CLEAR TAPE IF THE RECEPTACLE IS BLACK OR BROWN,PROVIDE WHITE DEPARTMENT,FIRE MARSHAL.UTILITY COMPANY AND OTHER AGENCIES
<br /> LEI JENING ON CLEAR TAPE.LABEL TO BE NEATLY CENTERED IN THE TOP SPACE OF THE COVERPLATE,AND INDICATE THE SERVING PANEL AUTHORITY WAVING JURISDICTION(AHJ).BY THE ACT OF SUBMITTING A
<br /> AND CIRCUIT ORIGIN. BID PROPOSAL FOR WORK,TIE CONTRACTOR HAS REVIEWED THE PLANS
<br /> THOROUGHLY AND ACCEPT FULL RESPONSIBILITY OF PLAN CORRECTIONS
<br /> AND ASSOCIATED CONSTRUCTION COSTS REQUIRED BY ANJ, ELECTRICAL SYMBOLS
<br /> ELECTRICAL SPECIFICATIONS 3 GENERAL.NOTES 2 ELECTRICAL SYMBOLS 1 SPECIFICATIONS,NOTES
<br /> NOT TO SCALE E-000 NOT TO SCALE E-000 NOT TO SCALE
<br /> E-000
<br />
|