6300 MERRILL CREEK PKY ONAMAC 2022-10-14

• JMTPO PIPE BOOTS Johns Manville Features and Components component Use: A smooth,cone-shaped boot,for traditional or split-pipe A flashing applications to securely seal the penetration. Accessory Pipe boots eliminate the need for field fabrication. Single Ply Material: Flexible,smooth,non-reinforced TPO(thermoplastic Type polyolefin)cone-shaped boot with preformed flange. FP Colors: White;Grey;and Tan Penetration t. System Compatibility This product may be used as a component in the following systems.Please reference product application for specific installation methods and information. TPO MF AD Do not use with Multi-Ply systems tT Compatible with the selected Single Ply systems above Key: HA = Hot Applied CA = Cold Applied HW= Heat Weldable SA = Self Adhered MF= Mechanically Fastened AD =Adhered BA = Ballasted Peak Advantage®Guarantee Information Installation/Application Systems Approved for use in any JM Peak Advantage Guarantee System 41/4 Hot Air Weld • Each boot has a cutting guide for easy reference and diameter measurements. • Do not install JM TPO Pipe Boots in direct contact with asphalt. • Refer to JM TPO applicator guides or detail drawings for instructions. Packaging and Dimensions Sizes* 1"to 6"(2.5 cm to 15.2 cm) Boots per Box 10 Weight per Boot 0.85 lb(0.38 kg) Weight per Box 9 lb(4.1 kg) Thickness 0.060"(1.52 mm) *Standard size pipe clamps covering the largest possible range(6"diameter)are included for each pipe boot Dimensions less than 1.5"(3.8 cm)diameter may require alternative clamps. Storage Storage Conditions Store indoors,out of direct sunlight,and keep clean and dry prior to application. Refer to the Safety Data Sheet and product label prior to using this product. The Safety Data Sheet is available by calling(800)922-5922 or on the Web at www.jm.com/roofing. RS-8591 4-18(Replaces 10-15)