|
FLASHING
<br />SOLDERED
<br />VERT
<br />HORIZ
<br />VERT
<br />SIDE OR
<br />MOCKUP
<br />TYPE
<br />\/
<br />DESCRIPTION
<br />DETAIL REFERENCES
<br />ONE-PIECE
<br />FINISH
<br />FLANGE
<br />FLANGE
<br />DRIP
<br />RETURN
<br />REQUIREMENTS
<br />COMMENTS
<br />FLANGE
<br />FLANGES
<br />HEAD
<br />1
<br />HEAD FLASHING @ MISC PENETRATIONS
<br />16A/A5.2; 6D/A5.5
<br />NO
<br />MTL-1
<br />411
<br />VIF
<br />3/4"
<br />-
<br />REQ'D
<br />W/ HEMMED DRIP EDGE & 1/2" END DAMS, SET IN SLNT-2
<br />FLASHINGS
<br />OR
<br />MTL-3
<br />2
<br />"L" BASE [METAL FLASHING @
<br />9A,12/A5.1; 17/A5.2;
<br />NO
<br />MTL-4
<br />611
<br />1 1/2" /
<br />-
<br />-
<br />REQ'D
<br />W/ HEMMED EDGE; PROVIDE SADDLES 6, 7, 3, 9, 10, 11 & 12; SET IN
<br />HARDSCAPE & BRICK
<br />6B/A5.3
<br />OR
<br />VIF
<br />SLN`- 3
<br />MIL-5
<br />3
<br />STRAIGHT BASE METAL FLASHING
<br />9B/A6.1
<br />RIG
<br />MTL-4
<br />6"
<br />-
<br />_
<br />_
<br />W/ STRAIGHT HEM; SET IN SLNT®3
<br />4
<br />"L" BASE METAL FLASHING @ GRADE
<br />9C/A5.1
<br />NO
<br />MTL-4
<br />411
<br />VIF /
<br />_
<br />_
<br />_
<br />W/O HEMMED EDGE, PROVIDE IN CONJUNCTION W/ MTL WHERE
<br />VARIES
<br />GRADE IS MORE THAN 6" FROM BASE OF SIDING; SHAPE PER. DETAIL
<br />TO ACCOM MTL #5
<br />5
<br />"Z" BASE METAL FLASHING @ GRADE
<br />9D/A5.1
<br />NO
<br />MTL-4
<br />411
<br />VIF
<br />11'
<br />-
<br />SHAPE. PER DETAIL; W/ HEMMED EDGE; SET IN SLIT-3
<br />6
<br />#2 INT CORNER SADDLE
<br />8A,17/A5.2
<br />YES
<br />MTL-2
<br />6"
<br />1 1/2" /
<br />-
<br />411
<br />RECOMMENDED
<br />SHAPE PER DETAIL TO ACCOM MTL ff 2; W/ HEMMED EXPOSED
<br />VIF
<br />EDGES
<br />7
<br />#2 EXT CORNER SADDLE
<br />613,17/A5.2
<br />YES
<br />MTL-2
<br />611
<br />1 1/2" /
<br />_
<br />411
<br />RECOMMENDED
<br />SHAPE PER DETAIL TO ACCOM MTL # 2
<br />SIDING,
<br />VIF
<br />BASE
<br />3
<br />2 SADDLE HARDSCAPE TRANSITIONS
<br />8C/A5.2
<br />YES
<br />MTL-2
<br />611
<br />VIF /
<br />-
<br />411
<br />-
<br />SHAPE PER DETAIL TO ACCOM MTL 2; W1 HEMMED EXPOSED
<br />TRANSITION
<br />VARIES
<br />EDGES
<br />FLASHINGS
<br />9
<br />2 SADDLE DE TO HARDSCAPE
<br />3D/A5.2
<br />YES
<br />MTL-2
<br />611
<br />VIF /
<br />VIF
<br />4"
<br />-
<br />SHAPE PER DETAIL TO ACCOM MTL # 2; W1 HEMMED EXPOSED
<br />TRANSITION
<br />VARIES
<br />EDGES
<br />10
<br />BRICK CAP SADDLE
<br />8E,10/A5.2
<br />YES
<br />MTL-2
<br />611
<br />VIF
<br />211
<br />411
<br />RECOMMENDED
<br />SHAPE PER DETAIL TO ACCOM (E) BRICK & METAL; W/ 1/2" END DAM
<br />& HEMMED EXPOSED EDGES
<br />11
<br />RIOT USED
<br />-
<br />-
<br />-
<br />-
<br />-
<br />_
<br />_
<br />-
<br />12
<br />RIOT USED
<br />_
<br />_
<br />_
<br />_
<br />_
<br />13
<br />"J" METAL @ SID-1 TO CORK
<br />6A/A5.1
<br />NO
<br />MTL-4
<br />-
<br />611
<br />-
<br />-
<br />-
<br />SHAPE PER DETAIL W/ HEMMED EDGE
<br />14
<br />SID-1 THROUGH WALL FLASHING
<br />13A,17A,B,C,D/A5.1
<br />NO
<br />MTL-1
<br />6"
<br />VIF
<br />2"
<br />-
<br />REQ'D
<br />SHAPE PER DETAIL W/ HEMMED DRIP EDGE
<br />15
<br />#14 EXT CORNER SADDLE
<br />13B,17A,C/A5.1
<br />YES
<br />MTL-2
<br />6"
<br />VIF
<br />29'
<br />-
<br />REQ`D
<br />SHAPE PER DETAIL W/ DRIP EDGE CLEAT
<br />16
<br />#14 END CAP SADDLE
<br />13C,17B/A5.1
<br />YES
<br />MTL-2
<br />61"
<br />VIF
<br />2"
<br />-
<br />REQ'D
<br />SHAPE PER DETAIL W/ DRIP EDGE CLEAT
<br />17
<br />NOT USED
<br />-
<br />-
<br />_
<br />_
<br />_
<br />_
<br />_
<br />_
<br />13
<br />WALKWAY& LANDING DRIP EDGE
<br />3A,D,17G/A6.3;
<br />NO
<br />MTL-1
<br />411
<br />211
<br />_
<br />RECOMMENDED
<br />W/ HEMMED DRIP EDGE, PROVIDE SADDLES @ CORNERS,
<br />FLASHING
<br />1A,1 B,16A,B,C,D,E/A5.4
<br />TRANSITIONS TERMINATIONS
<br />19
<br />HEMMED EDGE FLASHING @ STAIR
<br />-
<br />RECOMMENDED
<br />W/STRAIGHT HEM; PROVIDE SADDLES @ CORNERS, TRANSITIONS
<br />17H/A5.3;
<br />NO
<br />MTL-1
<br />-
<br />411
<br />2"
<br />TREADS
<br />1 C,16,19B,C/A5.4
<br />i
<br />TERMINATIONS
<br />20
<br />#14 TO #18 SADDLE @ WALL
<br />16,17A/A5.3
<br />YES
<br />MTL-2
<br />61f
<br />411
<br />211
<br />4"
<br />RECOMMENDED
<br />SHAPE PER DETAIL; W/ DRIP EDGE CLEAT
<br />21
<br />#18 OR #19 SADDLE @ BEAM TO WALL
<br />17B/A5.3; 16G/A5.4
<br />YES
<br />MTL-2
<br />6"
<br />4E1 / VIF
<br />211
<br />411
<br />RECOMMENDED
<br />SHAPE PER DETAIL; W/ ®RIP EDGE CLEAT@ MTL #18 OR STRAIGHT
<br />EDGE CLEAT@ MTL 19; SIZE HORN FLANGE TO EXTEND BELOW &
<br />4" PAST STRINGER (WHERE OCCURS) TO LAP W/ADJ EDGE
<br />WALKWAY&
<br />FLASHING
<br />LANDING
<br />22
<br />#18 & #19 SADDLE @ TOP OF STRINGER
<br />17C/A5.3; 16A/A.4;
<br />YES
<br />MTL-2
<br />-
<br />4" / VIF
<br />2E1
<br />411
<br />RECOMMENDED
<br />SHAPE PER DETAIL; PROVIDE END DAM; W1 DRIP EDGE CLEAT
<br />FLASHINGS
<br />19A/A5.5
<br />!
<br />STRAIGHT EDGE CLEAT, HEMMED EXPOSED EDGES
<br />23
<br /># 13 SADDLE @ BEAM TO PLANAR WALL
<br />11,17D/A5.3
<br />YES
<br />MTL-2
<br />6"
<br />4"°
<br />21'
<br />411
<br />RECOMMENDED
<br />SHAPE PER DETAIL; W/ DRIP EDGE CLEAT
<br />24
<br />#18 & #19 SADDLE @ TOP OF STRINGER
<br />17E/A5.3; 16B/A5.4
<br />YES
<br />MTL-2
<br />-
<br />4" / VIF
<br />211
<br />41'
<br />RECOMMENDED
<br />SHAPE PER DETAIL; W/ DRIP EDGE CLEAT& STRAIGHTEDGE CLEAT;
<br />HEMMED EXPOSED EDGES
<br />25
<br />#18 & #19 SADDLE @ TOP OF STRINGER
<br />17F/A5.3; 16E/A5.4;
<br />YES
<br />MTL-2
<br />-
<br />4" / VIF
<br />2
<br />4°"
<br />RECOMMENDED
<br />SHAPE PER DETAIL; W/ DRIP EDGE CLEAT & STRAIGHT EDGE CLEAT;
<br />19B/A5.5
<br />HEMMED EXPOSED EDGES
<br />26
<br />#18 INT CORNED SADDLE
<br />171/A5.3
<br />YES
<br />MTL-2
<br />-
<br />411
<br />2i1
<br />4"
<br />RECOMMENDED
<br />SHAPE PER DETAIL; W/ DRIP EDGE CLEATS
<br />27
<br />#18 & #19 INT CORNER SADDLE
<br />17J/A5.3;
<br />YES
<br />MTL-2
<br />-
<br />411
<br />211
<br />411
<br />RECOMMENDED
<br />SHAPE PER DETAIL; W/ DRIP EDGE CLEAT & STRAIGHT EDGE CLEAT,
<br />16C,D,19A/A5.4
<br />i
<br />SIZE HORN FLANGE -10 EXTEND BELOW & 4" PAST STRINGER
<br />WHERE OCCURS) TO LAP W/ADJ EDGE FLASHING
<br />M{SC
<br />26
<br />STRINGER CAP FLASHING
<br />4/A5.4;19B/A5.5
<br />NO
<br />MTL-1
<br />611
<br />VIF
<br />VIF
<br />-
<br />RECOMMENDED
<br />SHAPE PER DETAIL; W/ HEMMED EDGE & END DAM c BOTTOM OF
<br />FLASHINGS
<br />STRINGER, PROPERLY LAP W/ MTL #25 @ TOP OF STRINGER,
<br />PROVIDE BLOCKING @ HANDRAIL ATTACHMENT IACHMENT LOCATIONS
<br />1METAL SCHEDULE_
<br />A0.1
<br />METAL NOTES:
<br />METAL FLASHING SCHEDULE NOTES:
<br />1.
<br />REFER TO METAL FLASHING SCHEDULE ON 1/A0.1 & METAL FLASHING
<br />1.
<br />REFER TO DETAILS & SECTION 07 60 00 - FLASHING & SHEET METAL
<br />SCHEDULE NOTES ON 3/A0A.
<br />FOR ADDITIONAL NOTES & DESCRIPTIONS OF FLASHINGS & METAL.
<br />CONTRACTOR SHALL THOROUGHLY REVIEW DRAWINGS
<br />2.
<br />INSTALL METAL FLASHINGS IN ACCORDANCE W/ SMAGNA
<br />SPECIFICATIONS FOR ADDITIONAL METAL FLASHING INFORMATION
<br />RECOMMENDATIONS.
<br />NOT CONTAINED IN THE METAL FLASHING SCHEDULE.
<br />3.
<br />INSTALL METAL FLASHINGS IN SEQUENCE DENOTED ON DRAWINGS.
<br />2.
<br />DESCRIPTIONS OR TITLES OF METAL FLASHING IN SCHEDULE MAY NOT
<br />EXACTLY MATCH FLASHING DESCRIPTION IN DETAILS. METAL
<br />4.
<br />USE FULL LENGTHS OR LONGEST PIECES OF METAL POSSIBLE.
<br />FLASHING NUMBER IS INDICATOR OF SCHEDULED FLASHING @ EACH
<br />LOCATION.
<br />5.
<br />METAL FLASHING FINISHES ARE AS NOTED ON METAL SCHEDULE.
<br />3.
<br />DETAIL REFERENCE COLUMN IN SCHEDULE IS FOR REFERENCE ONLY
<br />6.
<br />FIELD VERIFY ALL FLASHING SIZES & DIMENSIONS; ALL FLASHINGS SHALL
<br />& IS NOT A COMPLETE LIST OF ALL ASSOCIATED WATERPROOFING
<br />FIT TIGHT & TRUE TO SUBSTRATE, UNO.
<br />DETAILS.
<br />7.
<br />ALL METAL FLASHING IS TO HAVE MINIMUM 4" FLAT SEAM OVERLAPS, UNO.
<br />4.
<br />FLASHING DIMENSIONS ARE AS NOTED ON SCHEDULE, LINO IN
<br />FULLY SEAL PER SPECIFICATIONS. PROVIDE 4" FLAT SEAM OVERLAPS @
<br />DETAILS. IF DISCREPANCIES ARISE, CONTACT ARCH FOR DIRECTION
<br />BACKER PLATES @ ALL LOCATIONS.
<br />CLARIFICATION.
<br />3.
<br />SET ALL METAL IN SEALANT WHERE TYPICAL & NECESSARY IN ORDER TO
<br />5.
<br />IF METAL FLASHINGS REQUIRE END DAMS, END CAPS & SOLDERED
<br />CREATE WATERTIGHT ASSEMBLIES. SET FLASHINGS IN SEALANT WHERE
<br />FLASHINGS, EXPOSED FLASHINGS MUST BE FINISHED TO MATCH
<br />SHOWN ON DETAILS.
<br />ADJACENT METAL FLASHINGS, OR AS OTHERWISE DIRECTED BY ARCH.
<br />9.
<br />SLOPE HORIZONTAL FLANGES AS REQUIRED TO SHED WATER PER DETAILS.
<br />6.
<br />SOLDER METAL FLASHING CORNERS & JOINTS AS NOTED IN DETAILS
<br />SPECIFICATIONS. INSTALL FULLY SOLDERED ONE-PIECE INTERIOR
<br />10.
<br />ISOLATE ALL METAL FLASHINGS FROM EXTERIOR SHEATHING W/ MINIMUM
<br />EXTERIOR CORNERS @ ALL FLASHING TRANSITIONS, UNO.
<br />ONE LAYER OF TARGET WRB. WRB SHALL NOT RESIDE MORE THAN 4"
<br />ABOVE METAL FLASHINGS.
<br />7.
<br />ALL METAL FLASHING IS 24 GAUGE, UNO.
<br />11.
<br />FILL OR GRIND CONCRETE @ METAL FLASHINGS SET IN SEALANT @
<br />3.
<br />ALL VERTICAL DRIP FLANGES ARE TO BE HEMMED, LINO IN THE
<br />CONCRETE, AS NEEDED TO CREATE COMPLETE SEAL @ INTERFACE.
<br />COMMENTS SECTION OF THE SCHEDULE.
<br />12.
<br />FINISHED METAL FLASHINGS SHALL BE AESTHETICALLY PLEASING, ALIGN,
<br />9.
<br />PROVIDE A DRIP EDGE CLEAT @ ALL SADDLES AS NOTED IN THE
<br />FORM TIGHT SEAMS & MEET REQUIREMENTS IN SECTION 07 60 00 -
<br />COMMENTS SECTION OF THE SCHEDULE. A DRIP EDGE CLEAT IS A
<br />FLASHING & SHEET METAL.
<br />DRIP EDGE W/O A HEM.
<br />,("2� METAL NOTES
<br />9016 REGISTERED
<br />ARCHITECT
<br />LISA CLARK MOE
<br />S I A I E OF WASHINGTON
<br />The documents created
<br />Architect and its Consultants
<br />of the Architect's e
<br />Architect retains all common
<br />statutory and other
<br />includingreserved rights, the
<br />copyright. The Architect's
<br />documents anot be used
<br />by anyone on any other
<br />project, except with the
<br />Architect's written permission.
<br />REVISIONS:
<br />10-16-2020 PERMIT SET
<br />BLDG DEP T :
<br />DATE
<br />10-16-2020
<br />SHEET T iTLE:
<br />r
<br />
|