3120 19TH ST 2022-12-21 - Laserfiche WebLink

Power Optimizer For North America P320 / P340 / P370 / P400 / P401 / P405 / P485 / P505 1 (for higheri •411 P405 P485 P505 Optimizer model P320 (for high- (for high power (for 72 & • (for high- (for high- (for higherl •• • .1 •• ••60 and 72- 96-cell .1 voltage voltage current compatibility) modules) 60-cell cell modules) modules) modules) modules) modules)? • •• modules) INPUT Rated Input DC Power() 320 340 370 400 405 485 505 W Absolute Maximum Input Voltage 48 60 80 60 1251ll 83(2) Vdc (Voc at lowest temperature) MPPT Operating Range 8-48 8-60 8-80 8-60 12.5-105 12.5-83 Vdc Maximum Short Circuit Current 11 10.1 11.75 11 14 Adc (Isc) Maximum DC Input Current 13.75 12.5 14.65 12.5 17.5 Adc Maximum Efficiency 99.5 % Weighted Efficiency 98.8 98.6 % Overvoltage Category II OUTPUT DURING OPERATION (POWER OPTIMIZER CONNECTED TO OPERATING SOLAREDGE INVERTER) Maximum Output Current 15 Adc Maximum Output Voltage 60 85 Vdc OUTPUT DURING STANDBY(POWER OPTIMIZER DISCONNECTED FROM SOLAREDGE INVERTER OR SOLAREDGE INVERTER OFF) Safety Output Voltage per Power O ±0.1 Vdc Optimizer STANDARD COMPLIANCE EMC FCC Part15 Class B,IEC61000-6-2,IEC61000-6-3 Safety IEC62109-1(class II safety),UL1741 Material UL94 V-0,UV Resistant ROHS Yes INSTALLATION SPECIFICATIONS Maximum Allowed System 1000 Vdc Voltage Compatible inverters All SolarEdge Single Phase and Three Phase inverters 129x153x33.5 129x153x29.5 129x162x59/ mm Dimensions(W x L x H) 129x153 x27.5/5.1x6x1.1 /5.1x6x1.3 /5.1x6x1.16 129x159x49.5/5.1x6.3x1.9 5.1x6.4x2.3 /in Weight(including cables) 630/1.4 750/1.7 655/1.5 845/1.9 1064/2.3 gr/Ib Input Connector MC4131 Single or dual MC4(3) p MC4(3)(4) Input Wire Length 0.16/0.52 m/ft Output Wire Type/Connector Double Insulated/MC4 Output Wire Length 0.9/2.95 1.2/3.9 m/ft Operating Temperature Range(') -40-+85/-40-+185 -C/`F Protection Rating IP68/NEMA6P Relative Humidity 0-100 % (1)Rated power of the module at STC will not exceed the optimizer"Rated Input DC Power".Modules with up to+5%power tolerance are allowed 2)NEC 2017 requires max input voltage be not more than 80V (3)For other connector types please contact SolarEdge (4)For dual version for parallel connection of two modules use P485-4NMDMRM.In the case of an odd number of PV modules in one string,installing one P485 dual version power optimizer connected to one PV module.When connecting a single module seal the unused input connectors with the supplied pair of seals. (5)For ambient temperature above+85°C/+185°F power de-rating is applied.Refer to Power Optimizers Temperature De-Rating Technical Note for more details. DesignPV System • Single Phase Three Phase forfor SolarEdgeSingle phase208V grid 277/480V grid Minimum String Length P320,P340,P370, 8 10 18 P400,P401 (Power Optimizers) P405,P485,P505 6 8 14 Maximum String Length(Power Optimizers) 25 25 50(e) 5700(6000 with Maximum Power per String SE7600-US-SE11400- 5250 60000) 12750110) W US) Parallel Strings of Different Lengths or Orientations Yes (6)For detailed string sizing information refer to:http://www.solaredge.com/sites/default/files/string-sizing-na,pdf (7)It is not allowed to mix P405/P485/P505 with P320/P340/P370/P400/P401 in one string (8)A string with more than 30 optimizers does not meet NEC rapid shutdown requirements;safety voltage will be above the 30V requirement (9)For 208V grid:it is allowed to install up to 6,500W per string when the maximum power difference between each string is 1,000W (10)For 277/480V grid:it is allowed to install up to 15,000W per string when the maximum power difference between each string is 2,000W®SolarEdge Technologies Ltd.All rights reserved.SOLAREDGE,the SolarEdge logo,OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies,Inc. AM- Ro H S All other trademarks mentioned herein are trademarks of their respective owners.Date:04/2020NO2/ENG NAM.Subject to change without notice. Intertek