Laserfiche WebLink
3.3 Mounting Aids and Required Tools <br /> In addition to standard hand tools, you will need the following tools: <br /> ■ 5 mm Allen key/5 mm Allen key power driver <br /> ■ 13 mm hex socket/ 13 mm box or open-end wrench <br /> ■ 7/16" (11mm) box end wrench <br /> ■ Drill driver <br /> ■ Metric socket set <br /> ■ Torque wrench <br /> ■ Reciprocating saw and/or band saw <br /> ■ Chalk line <br /> ■ Spirit level <br /> ■ Tape measure <br /> Please adhere to the mounting steps listed and be sure to follow the safety instructions. DO NOT use an impact gun. <br /> DO NOT use an impact gun <br /> on QRail components. <br /> WARNING <br /> 3.4 Fastener Torque Settings <br /> Proper torque is important to a safe and secure installation. Please refer to Section 2.2 QRail Components for recommended <br /> torque values for the various fasteners in the QRail system. Unless specifically directed otherwise, these values should be <br /> used for all metal-to-metal attachments. <br /> B1 7.2.3-46 15 Jul-2019, Rev 4.2 <br />