Laserfiche WebLink
2. Transmitters in the 72 to 76 Mhz range shall have a band pass filter providing a minimum of <br /> 30 dB of attenuation 1.0 Mhz removed from the operating frequency. Transmitters in this <br /> frequency range shall also be fitted with dual isolators providing a minimum of 50 dB isolation. <br /> 3. Transmitters in the 88 to 108 Mhz range shall have a band pass filter providing a minimum of <br /> 30 dB of attenuation 1.0 Mhz removed from the operating frequency. Transmitters in this <br /> frequency range shall also be fitted with dual isolators providing a minimum of 50 dB isolation. <br /> No transmitters with a transmitter power output of over 100 watts shall be permitted within <br /> SERS facilities. In addition, some facilities may not allow use of transmitting equipment in this <br /> frequency range. <br /> 4. Transmitters in the 108 to 225 Mhz range shall have a band pass filter providing a minimum <br /> of 15 dB of attenuation 1.0 Mhz removed from the operating frequency. Transmitters in this <br /> frequency range shall also be fitted with dual isolators providing a minimum of 50 dB isolation. <br /> 5. Transmitters in the 225 to 400 Mhz range shall have a band pass filter providing a minimum <br /> of 20 dB of attenuation 1.0 Mhz removed from the operating frequency. Transmitters in this <br /> frequency range shall also be fitted with dual isolators providing a minimum of 50 dB isolation. <br /> li 6. Transmitters in the 400 to 512 Mhz range shall have a band pass filter providing a minimum <br /> of 20 dB of attenuation 2.0 Mhz removed from the operating frequency. Transmitters in this <br /> frequency range shall also be fitted with dual isolators providing a minimum of 50 dB isolation. <br /> Window filtering with broader responses may be authorized on a case by case basis. <br /> 7. Transmitters in the 512 to 746 Mhz range shall have a band pass filter providing a minimum <br /> of 20 dB of attenuation 2.0 Mhz removed from the operating frequency. Transmitters in this <br /> frequency range shall also be fitted with dual isolators providing a minimum of 50 dB isolation. <br /> 8. No broadcast transmitters in the 746 to 806 Mhz range shall be permitted in SERS facilities. <br /> 9. Transmitters in the 806 to 990 Mhz range shall have a band pass filter providing a minimum <br /> of 15 dB of attenuation 3.0 Mhz removed from the operating frequency. Transmitters in this <br /> frequency range shall also be fitted with dual isolators providing a minimum of 50 dB isolation. <br /> Window filtering with broader responses may be authorized on a case by case basis. <br /> 10. Transmitters in the 1500-2000 Mhz range shall have a band pass filter providing a minimum <br /> of 15 dB of attenuation 3.0 Mhz removed from the operating frequency. Transmitters in this <br /> frequency range shall also be fitted with dual isolators providing a minimum of 50 dB isolation. <br /> Window filtering with broader responses may be authorized on a case by case basis. <br /> Site Engineering Standards and Site User Practices <br /> The following site engineering standards and site user practices shall be observed: <br /> 1. A band pass cavity shall always be used before each receiver. A window filter may be <br /> substituted in multicoupled systems. Crystal filters are also advisable at crowded facilities. <br /> 25 of14,, $ . <br />