|
al, 11 lull 111m, AN
<br />CONSTRUCTION SHALL NOT RESTRICT A FIVE-FOOT CLEAR AND UNOBSTRUCTED ACCESS TO ANY WATER OR
<br />POWER DISTRIBUTION FACILITIES (POWER POLES, PULL -BOXES, TRANSFORMERS, VAULTS, PUMPS, VALVES,
<br />METERS, APPURTENANCES, ETC.) OR TO ANY LOCATION OF THE HOOKUP, THE CONSTRUCTION SHALL_ NOT BE
<br />WITHIN 10'-0" OF ANY POWER LINES- WHETHER OR NOT THE LINES ARE LOCATED ON THE PROPERTY. FAILURE
<br />TO COMPLY MAY CAUSE CONSTRUCTION DELAYS AND/OR ADDITIONAL EXPENSES.
<br />STEEL, COPPER OR FERROUS PIPES OR CONDUITS MAY PENETRATE CONCRETE WHERE THE PENETRATING
<br />ITEM IS A MAXIMUM 6- INCH DIAMETER AND THE AREA OF THE OPENING THROUGH THE WALL DOES NOT
<br />EXCEED 144 SQUARE INCHES
<br />HEALTH DEPARTMENT NOTES
<br />MOP SINKS, UTILITY SINKS AND ANY HOSE BIBBS WHERE DOMESTIC WATER OUTLETS MAY BE
<br />SUBMERGED IN CONTAINERS OR SINKS MUST HAVE APPROVED BACKFLOW PREVENTION DEVICES
<br />INSTALLED.
<br />LIGHT FIXTURES IN FOOD STORAGE AREAS TO BE PROTECTS AGAINST BREAKAGE TROUGH THE USE OF
<br />PLASTIC SHIELDS, PLASTIC SLEEVES, SHATTER -RESISTANT LENSES AND/OR OTHER APPROVED
<br />DEVICES,
<br />ALL CONSTRUCTOR AND EQUIPMENT INSTALLATIONS ARE SUBJECT TO ON-STE INSPECTIONS. FINAL
<br />INSPECTION AND APPROVAL IS REQUIRED PRIOR TO BEGINNING OPERATION.
<br />NO ALCOHOLIC BEVERAGES WILL BE CONSUMED ON THE PREMISES,
<br />ALL PLUMBING, ELECTRICAL LINES TO BE CONCEALED WITHIN A BUILDING WALL STRUCTURE,
<br />WHEREVER POSSIBLE. ALL LINES NOT CONCEALED TO BE SECURED 6 INCHES OFF FLOOR AND 3/4'
<br />FROM WALLS AND CEILINGS USING OFFSET BRACKET.
<br />FIRE / LIFE NOTES
<br />BUILDINGS UNDERGOING CONSTRUCTION, ALTERATION OR DEMOLITION SHALL BE IN ACCORDANCE WITH CHAPTER 14.
<br />PROVIDE MINIMUM 2A-1013=C RATED FIRE EXTINGUISHES LOCATED WITHIN A 75-FOOT TRAVEL DISTANCE FROM ANY POINT
<br />IN THE BUILDING. EXTINGUISHERS SHALL BE MOUNTED ON THE WALL OR IN CABINETS, SUCH THAT THE TOP OF THE
<br />EXTINGUISHER IS NO MORE THAN 54" ABOVE FLOOR LEVEL SEE FLOOR PLAN FOR LOCATIONS. PROVIDE A MINIMUM OF 1
<br />EXTINGUISHER PER 3,000 SQUARE FEET,
<br />EXIT DOORS SHALL BE OPERABLE FROM THE INSIDE WITHOUT THE USE OF A KEY OR ANY SPECIAL KNOWLEDGE OR
<br />EFFORT. MANUALLY OPERATED EDGE OR SURFACE MOUNTED BOLTS ARE PROHIBITED.
<br />PROVIDE MAXIMUM OCCUPANCY SIGN OVER MAIN ENTRY DOORS (SIGNS SHALL BE POSTED IN A CONSPICUOUS
<br />LOCATION NEAR THE MAIN EXIT OR EXIT -ACCESS DOORWAY FROM THE ROOM),
<br />PROVIDE APPROVED EXIT SIGNS INSTALLED AT ALL REQUIRED EXITS AND WHERE OTHERWISE NECESSARY IN ORDER TO
<br />INDICATE THE DIRECTION OF EGRESS, NO POINT SHALL BE MORE THAN 100 FEET FROM THE NEAREST VISIBLE SIGN,
<br />EXIT SIGNS SHALL BE INTERNALLY OR EXTERNALLY ILLUMINATED,
<br />EMERGENCY LIGHTING, ILLUMINATING THE PATH OF EXITS SHALL BE PROVIDED PER GOVERNING CODES.
<br />THE MAXIMUM FLAME SPREAD CLASS OF FINISH MATERIALS USED ON INTERIOR WALLS AND CEILINGS SHALL NOT
<br />EXCEED CLASS B FOR EXITWAYS AND CLASS C FOR ROOMS OR AREA
<br />SUBMIT FIRE ALARM PLANS AS REQUIRED TO THE FIRE -DISTRICT FOR REVIEW AND APPROVAL PRIOR TO INSTALLATION,
<br />NOTESGENERAL
<br />1. THE DRAWINGS INDICATE THE END RESULT, IT SHALL BE THE CONTRACTOR'S RESPONSIBILITY TO VISIT THE JOB SITE
<br />PRIOR TO BID SUBMITTAL TO DETERMINE ANY PROBLEMS THEY WILL HAVE IN PERFORMING THE WORK. THE BID SHALL
<br />INCLUDE THE COST OF THE RESOLUTION OF ALL PROBLEMS.
<br />2. ANY CONDITION NOT COVERED IN THESE DRAWINGS SHALL BE BROUGHT TO THE ATTENTION OF THE ARCHITECT BY
<br />THE CONTRACTOR OR OWNER PRIOR TO BIDDING.
<br />3. SOLELY AS A CONVENIENCE TO THE OWNER, THE ARCHITECT MAY INCLUDE DOCUMENTS PREPARED BY CERTAIN
<br />CONSULTANTS (OR INCORPORATE THE RECOMMENDATIONS OF SAID CONSULTANTS IN DOCUMENTS PREPARED BY
<br />THE ARCHITECT) WITHIN THE SET OF DOCUMENTS ISSUED BY THE ARCHITECT BEING EXPRESSLY UNDERSTOOD THAT,
<br />BY SAID ISSUANCE, THE ARCHITECT ASSUMES NO LIABILITY FOR THE SERVICES OF SAID CONSULTANTS NOT UNDER
<br />CONTRACT TO THE ARCHITECT.
<br />4, CONTRACTOR SHALL ASSUME SOLE AND COMPLETE RESPONSIBILITY FOR JOB SITE CONDITIONS DURING THE
<br />COURSE OF CONSTRUCTION OF THIS PROJECT, INCLUDING THE SAFETY OF ALL PERSONS AND PROPERTY, AND THAT
<br />THIS REQUIREMENT SHALL APPLY CONTINUOUSLY AND NOT BE LIMITED TO NORMAL WORKING HOURS, AND THAT THE
<br />CONTRACTOR SHALL DEFEND, INDEMNIFY AND HOLD THE OWNER HARMLESS FROM ANY AND ALL LIABILITY, REAL OR
<br />ALLEGED, IN CONNECTION WITH THE PERFORMANCE OF WORK ON THIS PROJECT, EXCEPT FOR LIABILITY ARISING
<br />FROM SOLE NEGLIGENCE.
<br />5. THE CONTRACTOR SHALL MAINTAIN A COMPLETE SET OF DRAWINGS AT THE JOB SITE FOR USE IN MAKING'RECORD
<br />DRAWINGS". ANY REVISIONS SHALL BE NOTED THEREIN AND SUBMITTED TO THE ARCHITECT AT THE COMPLETION OF
<br />THE JOB
<br />6. THESE DRAWINGS WERE PREPARED IN A MANNER CONSISTS WITH EXISTING PROFESSIONAL STANDARDS AND WITH
<br />THE UNDERSTANDING EXPERIENCED CONSTRUCTION AND/OR DESIGN PROFESSIONALS FOR USE IN THE
<br />CONSTRUCTION OF THIS SPECIFIC PROJECT ONLY. THE DETAILS INDICATED ON THESE PLANS REPRESENT TYPICAL
<br />DETAILS REQUIRED FOR COMMUNICATING THIS PROJECT'S DESIGN INTENT TO SUCH QUALIFIED CONSTRUCTION
<br />PROFESSIONALS AND AS SUCH MAY NOT INCLUDE ALL THE DETAILS NECESSARY FOR THE FINAL COMPLETION OF THIS
<br />PROJECT,
<br />7. CONTRACTOR SHALL NOTIFY THE ARCHITECT AND STRUCTURAL ENGINEER OF RECORD IN WRITING IMMEDIATELY, OF
<br />ANY APPARENT DISCREPANCIES OR POSSIBLE OMISSIONS IN DETAILING, PRIOR TO STARTING THE WORK. THE
<br />CONTRACTOR SHALL TAKE FULL RESPONSIBILITY FOR TIE CONSEQUENCES OF PROCEEDING WITHOUT WRITTEN
<br />CLARIFICATIONS FROM THE ARCHITECT OR STRUCTURAL ENGINEER RELATED TO ANY SUCH APPARENT DISCREPANCY.
<br />8. ALL COSTS FOR INSPECTIONS, TEST SERVICES, BUILDING PERMITS, LICENSES AND CERTIFICATIONS SHALL BE THE
<br />RESPONSIBILITY OF THE GENERAL CONTRACTOR UNLESS OTHERWISE NOTED,
<br />9. ALL WORK SHALL CONFORM TO THE REQUIREMENTS OF THE BUILDING CODE, LATEST EDITION. REFER TO COVER
<br />SHEET FOR COMPLETE LIST OF CODES, ADOPTIONS, & AMENDMENTS APPLICABLE. COMPLIANCE WITH ADDITIONAL
<br />NOTED STANDARDS, SHALL BE TO THE MOST RECENTLY ACCEFTED/PUBLISHED STANDARDS, AS APPROVED BY THE
<br />GOVERNING AGENCY.
<br />10. THE ARCHITECT IS AUTHORIZED TO ORDER MINOR CHANGES DURING THE COURSE OF THE WORK WHICH WILL NOT
<br />INVOLVE EXTRA COST OR TIME AND WHICH ARE CONSISTENT WE THE CONTRACT DOCUMENT.
<br />11. GENERAL CONTRACTOR SHALL SUBMIT 6 SETS OR ELECTRONIC COPY OF SHOP DRAWINGS FOR ALL NEW MATERIALS
<br />FOR REVIEW. NO FABRICATION, ERECTION, OR INSTALLATION OF MATERIALS SHALL BE STARTED WITHOUT WRITTEN
<br />APPROVAL OF ARCHITECT,
<br />12. ANY CHANGES TO THESE DRAWINGS AND SPECIFICATIONS SHALL BE BY ADDENDUM OR CHANGE ORDER AND
<br />APPROVED BY THE OWNER AND ARCHITECT PRIOR TO THE WORK.
<br />13. SHOULD ANY CONDITIONS DEVELOP NOT COVERED BY THE CONTRACT DOCUMENTS GOVERNING WHEREIN THE
<br />FINISHED WORT{ WILL NOT COMPLY WITH THE BUILDING CODE, A CHANGE ORDER DETAILING AND SPECIFYING THE
<br />REQUIRED WORK WILL BE SUBMITTED TO AND APPROVED BY THE ARCHITECT BEFORE PROCEEDING WITH THE WORK.
<br />14. THE OWNER AND/OR THE ARCHITECT RESERVES THE RIGHT TO HAVE TESTS MADE WHEN DEEMED NECESSARY.
<br />SHOULD THE ARCHITECT ORDER SPECIAL TESTING OR INSPECTION OF A QUESTIONABLE PART OF THE WORK WHICH
<br />REVEALS DEFECTS NOT IN CONFORMITY WITH THE CONTRACT DOCUMENTS, THE CONTRACTOR SHALL PAY THE COST
<br />OF SUCH SPECIAL TESTING OR INSPECTION INCLUDING THE ARCHITECTS EXTRA SERVICES MADE NECESSARY
<br />THEREBY, OTHERWISE THE OWNER SHALL BEAR SUCH COST. TESTS SHALL BE MADE IN ACCORDANCE WITH
<br />RECOGNIZED STANDARDS BY A COMPETENT TESTING LABORATORY, ANY MATERIAL FOUND DEFECTIVE OR NOT IN
<br />CONFORMITY WITH SPECIFICATION STANDARDS SHALL BE PROMPTLY REPLACED OR REPAIRED AT THE EXPENSE OF
<br />THE CONTRACTOR. SAMPLES REQUIRED FOR TESTING WILL BE FURNISHED BY THE CONTRACTOR AND SELECTED AS
<br />DIRECTED BY THE ARCHITECT,
<br />15. BUILDINGS SHALL COMPLY WITH ALL APPLICABLE REGULATIONS OF THE BUILDING CODE, ENERGY RESOURCES
<br />CONSERVATOR AND DEVELOPMENT COMMISSION REGULATIONS, AND THE AMERICANS WITH DISABILITIES ACT. (ADA)
<br />16. GENERAL CONTRACTOR SHALL SUBMIT SHOP DRAWINGS TO ARCHITECT FOR REVIEW IN ITEMS CALLED OUT AS "OR
<br />EQUAL", AND IN ACCORDANCE WITH THE PROJECT MANUAL.
<br />17. CONSTRUCTION SAFETY: ALL WORK SHALL CONFORM TO THE REQUIREMENTS OF OSHA.
<br />13. ASTM STANDARDS AND OTHER MATERIAL REFERENCE DESIGNATIONS SHALL BE OF LATEST DATE ACCEPTABLE TO
<br />THE CHECKING AGENCY,
<br />19. DETAILS MARKED TYPICAL ON DRAWINGS ARE INTENDED FOR TYPICAL CONDITIONS ON THE ENTIRE PROJECT AND
<br />ARE TO APPLY WHERE SIMILAR CONDITIONS OCCUR.
<br />20. ALL ITEMS ARE NEW UNLESS NOTED AS EXISTING - TYPICAL
<br />21. CONTRACTORS MUST SUBMIT CERTIFICATE OF WORKMAN'S COMPENSATION INSURANCE COVERAGE PRIOR TO
<br />ISSUANCE OF BUILDING PERMITS.
<br />22. THE ENTIRE WORK PROVIDED FOR HEREIN IS TO BE CONSTRUCTS AND FINISHED, IN EVERY PART, IN A GOOD AND
<br />SUBSTANTIAL MANNER AND IN ACCORDANCE WITH THE DRAWINGS AND SPECIFICATIONS, THE FULL INTENT OF THE
<br />SAME. ANY WORK REQUIRED BY LAW, BUT WHICH MAY NOT BE SPECIFICALLY MENTIONED HEREIN SHALL BE DONE BY
<br />THE CONTRACTOR(S) IN ACCORDANCE WITH THE LAWS OF THE CITY, COUNTY, DISTRICT, OR STATE UNDER WHICH
<br />JURISDICTION MAY COME AND COST SHALL BE BORN BY THE CONTRACTOR'S), ANY SUCH EXTRA WORK SHALL BE
<br />DONE IN CONFORMANCE WITH THE PLAN BOTH AS TO THE MANNER AND APPEARANCE,
<br />23, CONTRACTOR SHALL RESIN SOLELY RESPONSIBLE FOR INSTALLING/MAINTAINING ADEQUATE BRACING DURING
<br />CONSTRUCTION UNTIL THE STRUCTURE IS SUFFICIENCY COMPLETE TO PROVIDE SUPPORT FOR THE VARIOUS
<br />INDIVIDUAL ELEMENTS AS INTENDED IN THE FINISHED STRUCTURE,
<br />24, INSPECTORS AND TESTING LABORATORIES MUST BE CHOSEN AND EMPLOYED BY OWNER, NOT THE CONTRACTOR.
<br />25. THE CONTRACTOR SHALL COOPERATE WITH ALL OTHER CONTRACTORS WHO MAY BE PERFORMING WORK ON BEHALF
<br />OF THE OWNER AND WORKMEN WHO MAY BE EMPLOYED BY THE OWNER ON ANY WORK IN THE VICINITY OF THE WORK
<br />TO BE DONE UNDER THIS CONTRACT; AND HE SHALL SO CONDUCT HIS OPERATIONS AS TO INTERFERE TO THE LEAST
<br />POSSIBLE EXTENT WITH THE WORK OF SUCH CONTRACTORS OR WORKMEN, HE SHALL MAKE GOOD PROMPTLY, AT
<br />HIS OWN EXPENSE, ANY INJURY OR DAMAGE THAT MAY BE SUSTAINED BY OTHER CONTRACTORS OR EMPLOYEES OF
<br />THE OWNER OCCASIONED BY HIS ACTS, ANY DIFFERENCE OR CONFLICT WHICH MAY ARISE BETWEEN THE
<br />CONTRACTOR AND OTHER CONTRACTORS OR BETWEEN THE CONTRACTOR AND WORKMEN OF THE OWNER IN
<br />REGARDS TO THEIR WORK, SHALL BE RESOLVED BY THE OWNER. IF THE WORK OF THE CONTRACTOR IS DELAYED
<br />BECAUSE OF ANY ACTS OR OMISSIONS OF ANY OTHER CONTRACTOR OR OF THE OWNER, THE CONTRACTOR SHALL
<br />ON THAT ACCOUNT HAVE NO CLAM AGAINST THE OWNER OTHER THAN FOR EXTENSION OF TIME.
<br />26. IT IS THE RESPONSIBILITY OF THE GENERAL CONTRACTOR TO INSURE THAT ALL SUBCONTRACTORS HAVE REVIEWED
<br />THE ENTIRE SCOPE OF THE PROJECT THAT RELATES TO THEIR TRADE, ALL SUBCONTRACTORS ARE REQUIRED
<br />TO REVIEW ALL RELATIVE WORK SHOWN ON "M" "P" "E" DRAWINGS.
<br />27. PRIOR TO START OF CONSTRUCTION, THE CONTRACTOR SHALL SECURE THE AREA SO THAT NO UNAUTHORIZED
<br />PERSONNEL WILL GAIN ACCESS TO THE PROJECT AREA OR CONTRACTOR'S STAGING AREA
<br />28. UTILITIES FOR CONSTRUCTION SHALL BE PROVIDED BY THE OWNER.
<br />29. CONTRACTOR SHALL BE SOLELY RESPONSIBLE FOR SECURING HIS EQUIPMENT, SUPPLIES, TOOLS, ETC.
<br />30, AT NO TIME DURING THE WORK UNDER THE CONTRACT SHALL THE CONTRACTOR PLACE, OR CAUSE TO BE PLACED,
<br />ANY MATERIAL OR EQUIPMENT, ETC., AT A LOCATION THAT COULD IMPEDE OR IMPAIR ACCESS TO OR FROM THE
<br />PRESENT FACILITIES.
<br />31. THE CONTRACTOR SHALL COOPERATE WITH THE OWNER TO THE FULLEST EXTENT IN PROVIDING TRAFFIC CONTROL
<br />DURING THE COURSE OF CONSTRUCTION SO AS TO PROVIDE A MINIMUM OF INCONVENIENCE TO MATERIAL
<br />MOVEMENT, AND MAXIMUM PROTECTION FOR EMPLOYEES, ALL CONTRACTOR EMPLOYEES ON THE PROJECT SHALL
<br />PARK THEIR PRIVATE VEHICLES IN THE AREA DESIGNATED BY THE OWNER,
<br />32. THE CONTRACTOR SHALL EXERCISE MAXIMUM DUST AND NOISE CONTROL EFFORTS TO KEEP AT A MINIMUM THE
<br />NUISANCE OF DUST AND CONSTRUCTION NOISE
<br />33. GOVERNING CODES AND FIRE DEPARTMENT FIELD INSPECTOR SHALL DICTATE SIZE, TYPE, QUANTITY AND LOCATIONS
<br />OF BOTH TEMPORARY AND PERMANENT PORTABLE FIRE EXTINGUISHERS
<br />34. GENERAL CONTRACTOR SHALL DESIGNATE A QUALIFIED PERSON FOR THE SUPERVISION OF WELDING OR CUTTING
<br />OPERATIONS, INCLUDING USE OF FLAME PROOFED TARPAULINS.
<br />35. GENERAL CONTRACTOR SHALL BE RESPONSIBLE FOR SPECIAL PRECAUTIONS WALLS, AND TEMPORARY WALLS AND
<br />SHORING
<br />36. GENERAL CONTRACTOR SHALL BE RESPONSIBLE IN KEEPING COMBUSTIBLE MATERIAL INCLUDING CRATED
<br />EQUIPMENT TO A MINIMUM AND AS FAR AWAY AS POSSIBLE FROM BUILDINGS UNDER CONSTRUCTION.
<br />37. ELECTRICAL CONTRACTOR SHALL VERIFY EXISTING SITE CONDITIONS, SERVICE REQUIREMENTS, AND EXACT
<br />LOCATIONS OF SERVICE FACILITIES.
<br />38. ELECTRICAL CONTRACTOR SHALL CHECK WITH OTHER TRADES FOR LOCATOR OF EQUIPMENT WHICH REQUIRES ANY
<br />HOOKUP, DISCONNECT SWITCHES, RELAYS, ETC. PRIOR TO ANY START OF WORK.
<br />39, THE ELECTRICAL CONTRACTOR SHALL VERIFY WITH MECHANICAL DRAWINGS FOR CONTROL WIRING DIAGRAMS,
<br />EXACT LOCATORS AND SIZE OF EQUIPMENT.
<br />40. ALL NEW EQUIPMENT AND COMPONENTS ARE TO BE UL OR ETL LISTED AND HAVE ICC NUMBERS FOR STRUCTURAL
<br />MEMBERS
<br />41. ALL CONTRACTOR SUPPLIED EQUIPMENT MUST BE APPROVED BY OWNER THROUGH SUBMITTALS
<br />EQUIPMENTH LE
<br />; � _I� ertt �e�r�: �d�
<br />ir��i��t�ir
<br />N ��
<br />����
<br />Electrical
<br />Plumbing
<br />Purchased
<br />Installed'
<br />1�1r1�
<br />e
<br />N� .$`i��1rr�r
<br />Hr�-
<br />��i
<br />Arr1
<br />�c�l��
<br />�l�JHz
<br />� Cl'
<br />I
<br />�
<br />/
<br />r
<br />� trt�r
<br />�I
<br />err
<br />�'� tr
<br />��1
<br />1 rd Ball
<br />Grain. r
<br />J X7 AND JEX1
<br />----
<br />-_-_
<br />_
<br />_ _
<br />----
<br />__
<br />_
<br />X
<br />X
<br />1
<br />Cir1
<br />1 itrlac
<br />� FR. I �[
<br />a=
<br />�_ a
<br />I�0
<br />tIl I�S�C_�� r lItPllt
<br />Pallet Jack
<br />1
<br />=c3----
<br />0
<br />120
<br />--_-
<br />a- -
<br />_ -
<br />0
<br />Floor Scrubber
<br />1
<br />Tennant
<br />5700
<br />- _
<br />----
<br />30
<br />120
<br />1
<br />00
<br />3/ "
<br />----
<br />0/&
<br />X
<br />X
<br />36V - 50A / 100O
<br />T raff ic Door & FrameDLirris,
<br />DIrL1Ilte Industrial
<br />a=
<br />=,-a
<br />aoo-
<br />_oG=
<br />___o
<br />a=o
<br />a
<br />X
<br />X,
<br />S/S STRUCTURAI- DOOR I=P
<br />Fly Fan
<br />4
<br />IIr,
<br />EP2UG-TS
<br />1
<br />00
<br />1
<br />00
<br />X
<br />X
<br />7 Fly Fars
<br />2
<br />Mars
<br />ST 4 -1 - 5
<br />----
<br />----
<br />7.5
<br />0
<br />1
<br />00
<br />==o_
<br />a=_=
<br />----
<br />X
<br />X
<br />i
<br />HVA Ground Mounted Unit
<br />1
<br />Trans
<br />VAS *'1 0 0
<br />_
<br />67
<br />208
<br />3
<br />00
<br />3/411
<br />___-
<br />__
<br />Ground Mounted Refrigeration Condensor
<br />2
<br />Bohn
<br />BCH006OMDACZ
<br />----
<br />===m
<br />27,5
<br />208
<br />O
<br />00
<br />_ =
<br />_=__
<br />___-
<br />X
<br />X
<br />EC motors
<br />O
<br />10 Refrigeration Evaporator Unit/
<br />Bohn
<br />BEi O O S A I,AB0100
<br />_ -_
<br />____
<br />0
<br />0
<br />1
<br />0
<br />0"
<br />__ -
<br />_ -3
<br />X
<br />E motors
<br />10
<br />11 Cooler Box
<br />1
<br />vo
<br />mo
<br />o
<br />ee 3
<br />----
<br />o--
<br />----
<br />X
<br />X
<br />1'
<br />'� %Iri4 SIi1C
<br />Advanced T
<br />7- - 1,
<br />----
<br />a=
<br />1
<br />1 0
<br />1
<br />OO
<br />1=1 2'"
<br />�
<br />0 '"
<br />/
<br />O '"
<br />X
<br />X
<br />12
<br />10 O Compartment Sink
<br />1
<br />Advanced Tale
<br />O-CO= =1 3RL
<br />----
<br />=___
<br />=---
<br />_ __
<br />__
<br />----
<br />Wall
<br />0/ "
<br />0/ "
<br />X
<br />X
<br />1
<br />14 janitors Sink
<br />1
<br />Must ee
<br />60
<br />----
<br />e c
<br />_
<br />----
<br />----
<br />----
<br />Nall
<br />O/ 31
<br />3/ '1
<br />X
<br />X
<br />1 .
<br />15 Hydraulic Lift
<br />2
<br />Presto
<br />TAD- 0900
<br />1-1/ '
<br />----
<br />200
<br />0
<br />00
<br />---
<br />=__=
<br />----
<br />X
<br />X
<br />1
<br />16 Security System
<br />1
<br />Convergent
<br />----
<br />120
<br />1
<br />00
<br />----
<br />----
<br />--
<br />X
<br />x
<br />10
<br />17 Intrusion System
<br />1
<br />Convergent
<br />----
<br />__
<br />1,5
<br />120
<br />1
<br />60
<br />=-__
<br />-- -
<br />x
<br />x
<br />1
<br />18 IT System
<br />1
<br />-__
<br />__
<br />j 120
<br />1
<br />00
<br />----
<br />=___
<br />___-
<br />X
<br />X
<br />1
<br />ROOM FINISH L
<br />RM # ROOM NAME
<br />SBSTR
<br />105 WAREHOUSE COOLER CONC
<br />106 PRODUCT ASSEMBLY CONC
<br />107 STORAGE CONC
<br />109 (N) IT ROOM CONC
<br />110 (N) PORTER'S CLOSET CONC
<br />FLOOR
<br />FINISH
<br />(ETR)
<br />(ETR)
<br />(ETR)
<br />(ETR)
<br />(ETR)
<br />BASE
<br />B=2
<br />B1
<br />Bi
<br />Bi
<br />B1
<br />NORTH
<br />SBSTR FINISH
<br />IMP / WC=1 FACT FIN
<br />BED SCRIM GYP (ETR)
<br />OPEN =__=
<br />(N) GYP BD (N) PAINT
<br />(N) GYP BD (N) PAINT
<br />SBSTR
<br />IMP / WC-1
<br />BD/SCRGYP
<br />OPEN
<br />(N) GYP BD
<br />(N) GYP BD
<br />WALLS
<br />EAST SOUTH
<br />FINISH SBSTR FINISH
<br />FACT FIN IMP / WC-1 FACT FIN
<br />(ETR) (E) GYP BD (ETR)
<br />_ (E) GYP BD (ETR)
<br />(N) PAINT (N) GYP BD (N) PAINT
<br />(N) PAINT (N) GYP BD (N) PAINT
<br />WEST
<br />SBSTR FINISH
<br />IMP / WC-1 FACT FIN
<br />(E) GYP BD (ETR)
<br />IWP / WC-1 FACT FIN
<br />(N) GYP LSD (N) PAINT
<br />(N) GYP BD (N) PAINT
<br />CEILING
<br />SBSTR FINISH
<br />IMP FACT FIN
<br />--= OTS
<br />-- = OTS
<br />(N) GYP LSD (N) PAINT
<br />(N) GYP BD (N) PAINT
<br />ITT AFF
<br />10'4'
<br />-
<br />=»
<br />9' 0,
<br />NOTES
<br />1
<br />I , , lll; J
<br />CP
<br />COOLER PANEL
<br />IMP
<br />INSULATED METAL PANEL
<br />PT
<br />PAINT
<br />A.C.T.
<br />ACOUSTIC CEILING TILE
<br />AL
<br />ALUMINUM
<br />SK BD
<br />BACKER BOARD
<br />CONC
<br />CONCRETE
<br />CPT
<br />CARPET
<br />CT
<br />CERAMIC TILE
<br />(E)
<br />EXISTING
<br />(ETR)
<br />EXISTING TO REMAIN
<br />FF
<br />FACTORY FINISH
<br />GWB
<br />GYPSUM BOARD
<br />S/S
<br />STAINLESS STEEL
<br />B-1
<br />6" VINYL COVE BASE
<br />B-2
<br />COOLER PANEL COVED SCREED
<br />WC-1
<br />46" HIGH S/S WAINSCOT ON EXPOSED INTERIOR AND EXTERIOR OF COOLER
<br />GENERAL NOTES
<br />1. FIRE TAPE ALL GYPSUM BOARD JOINTS IN EXISTING WALLS AND PLACE
<br />SEALER/PRIMER AND TWO COATS OF SEMIGLOSS WHITE PAINT
<br />DOOR SCHEDULE
<br />DOOR
<br />FRAME
<br />DR #
<br />ROOM NAME
<br />FIRE RATING
<br />LABEL
<br />HDWR
<br />GROUP
<br />NOTES
<br />SIZE
<br />DETAIL
<br />MATT=
<br />TYPE
<br />GLAZ
<br />MATL
<br />TYPE
<br />W
<br />ITT
<br />THK
<br />DEAD
<br />JAMB
<br />THRESH
<br />105
<br />WAREHOUSE COOLER
<br />6' 0°'
<br />3' 0"
<br />1 7/8"
<br />TRAFFIC
<br />B
<br />VISION PNL,
<br />S/S
<br />S/S TUBE
<br />7/A-701
<br />3/A-701
<br />m
<br />8
<br />109
<br />PORTERS CLOSET
<br />3L0"
<br />7L0"
<br />1-3/4"
<br />H.M.
<br />A
<br />H.M.
<br />n
<br />15/A-701
<br />10/A-701
<br />1
<br />1, 2, 3, 4, 6, 7,
<br />3,9,10
<br />110
<br />IT ROOM
<br />3'=0"
<br />7'-0"
<br />1-3/4"
<br />H.M.
<br />A
<br />H.M.
<br />15/A-701
<br />10/A-701
<br />--
<br />2
<br />1' 2' 3' 4, 6' 7`
<br />3,9,10
<br />113
<br />RECEIVING
<br />61-01,
<br />3' 0'°
<br />GATE
<br />C
<br />-
<br />V
<br />114
<br />RECEIVING
<br />6'4'
<br />6' 0"
<br />GATE
<br />C
<br />=
<br />_
<br />DOOR HAF
<br />MANUFACTURER QUANTITY ITEM
<br />ANLEY 1 1/2 PR BUTTS
<br />:ST 1 LOCKSET
<br />IMCO 1 STOP
<br />1
<br />NUMBER AND SIZE
<br />FBB-199 41/2 x 41/2
<br />93KON15CSTK
<br />1270CV
<br />DOOR HARDWARE 2
<br />FINISH
<br />MANUFACTURER
<br />QUANTITY
<br />ITEM
<br />NUMBER AND SIZE
<br />FINISH
<br />630
<br />STANLEY
<br />1 1/2 PR
<br />BUTTS
<br />FBB-199 41/2 x41/2
<br />630
<br />626
<br />BEST
<br />1
<br />LOCKSET
<br />9oKON15CSTK
<br />626
<br />626 d
<br />LCN
<br />1
<br />CLOSER
<br />4111-CUSH
<br />669
<br />TRIMCO
<br />1
<br />STOP
<br />1270CV
<br />626
<br />1 DOOR SUPPLIER SHALL SUPPLY AND INSTALL ALL DOOR HARDWARE
<br />2 INSTALL NEW OR CONFIRM EXISTING HARDWARE IS FULLY
<br />OPERATIONAL
<br />3 SUPPLY STAINLESS STEEL KICKPLATES ON EACH SIDE OF MAN DOORS
<br />4 ALL HARDWARE TO BE COMPLIANT WITH SECTION 1133B 2.5,2 ADA
<br />COMPLIANT LEVER HARDWARE IS TO BE USED UNLESS NO HARDWARE IS
<br />USED
<br />5 GENERAL CONTRACTOR TO VERIFY PROPER FUNCTIONING, LATCHING,
<br />LOCKING, AND SEALING(WHERE APPLICABLE) OF ALL MAN DOORS. ALL NON
<br />FUNCTIONING HARDWARE IS TO BE SERVICED/REPAIRED BACK TO
<br />OPERATING CONDITION.
<br />6, ALL NEW DOORS TO MATCH EXISTING DOOR, FRAME COLOR & HARDWARE
<br />7. MATCH NEW DOOR HEIGHT TO EXISTING DOOR HEIGHTS - FIELD VERIFY
<br />8, MAXIMUM DOOR OPENING EFFORTS OF 5 LBS.
<br />9. INSTALL DOOR WITH HARDWARE THAT WILL ALLOW DOOR TO BE OPENED
<br />FROM THE INSIDE WITHOUT KEY, SPECIAL KNOWLEDGE, OR EFFORT
<br />10. TRIM TO MATCH (E)
<br />812 SW WASHINGTON ST, SUITE 800
<br />PORTLAND OREGON 97205
<br />PHONE 503/226.0622
<br />FAX 503/ 226.0626
<br />ViiWW.MCA-ARCHITECTS.COM
<br />- REGISTERED
<br />W 14
<br />1 ARCHITECT
<br />'JACK Co MILLER
<br />STATE OF WASHINGTON
<br />U
<br />00
<br />U
<br />0
<br />re
<br />®
<br />00
<br />W-A
<br />>
<br />U
<br />PROJECT NO:
<br />DRWN BY: JW CHI<'D BY: JM
<br />DATE: 02-04-22
<br />A-200
<br />OC COPYRIGHT
<br />
|