Laserfiche WebLink
' <br /> UL 2703 LISTED <br /> CO�T�. us #5003807 <br /> Intertek <br /> Conforms to STD UL 2703 Standard for Safety First Edition: Mounting Systems, Mounting Devices, Clamping/ <br /> Retention Devices, and Ground Lugs for Use with Flat-Plate Photovoltaic Modules and Panels <br /> • Max Overcurrent Protective Device (OCPD) Rating: 40A <br /> • Max Module Size: 30.5 ft2 <br /> • Module Orientation: Portrait or Landscape <br /> • System Design Load Rating: 10 PSF downward, 5 PSF upward, 5 PSF lateral <br /> • Actual system structural capacity including spans and cantilevers are defined by PE stamped certification letters. <br /> • CAMO Specific Design Load rating: 50 PSF downward, 50 PSF upward, 15 PSF lateral <br /> Certified to CSA TIL No.A-40 Photovoltaic Module Racking Systems <br /> • Load Rating: 2400 PA[50 PSF] <br /> CLASS A SYSTEM FIRE RATING PER UL 2703 <br /> • Any Roof Slope with Module Types 1, 2, 3, 13, 19, 25 &29:Allowed with any roof slope.Any module-to-roof gap is <br /> permitted, with no perimeter guarding required. <br /> • Module Types 4 and 5:Allowed with Steep Slope Roofs (>_ 9.5°).Any module-to-roof gap is permitted, low edge <br /> guarding (Trim) required <br /> • Class A rated PV systems can be installed on Class A, B, and C roofs without affecting the roof fire rating <br /> CLASS B SYSTEM FIRE RATING PER UL 2703 <br /> • Module Types 4 and 5:Allowed with Steep Slope Roofs (>_ 9.5°).Any module-to-roof gap is permitted, with no <br /> perimeter guarding required <br /> WATER SEAL RATINGS: <br /> • UL 441 (Flashfoot2,All Tile Hook, Knockout Tile, Flashvue, L-Mount) <br /> • TAS 100(A)-95 (Flashfoot2,All Tile Hook, Knockout Tile, Flashvue, L-Mount, Qbase) <br /> • Tested and evaluated without sealant. <br /> • Any roofing manufacturer approved sealant is allowed. Ratings applicable for roof slopes between 2:12 and 12:12 <br /> STRUCTURAL CERTIFICATION <br /> • Designed and Certified for Compliance with the International Building Code &ASCE/SEI-7 <br /> FLORIDA PRODUCT APPROVAL#FL29843 <br /> • Conforms to TAS202, TAS 100(A) <br /> • Approved for installation both inside and outside High Velocity Hurricane Zones (HVHZ) <br /> • Allowable design pressure up to +100/-100 PSF <br /> • Additional details and full list of approved components can be found Here. <br /> Product markings are located on the Grounding Lug bolt <br /> head. <br /> F°rn► <br /> o 2022 IRONRIDGE, • • INSTALLATION <br />