Laserfiche WebLink
7. Install the Ember glass on the perforated area directly in front of the grate. Place a thick layer <br />of the ember glass over the perforations making sure to cover all of the holes. <br />B. Lightly dress the ember glass wild black touchup paint (we recommend Stove Bright®). Check <br />the appearance with the lights on and add additional paint, as deadest, for a realistic glowing <br />ember appearance. <br />NOTE: If power is supplied to the insert it can help to turn the lights on while painting so you can <br />determine an appropriate amount of paint for a realistic ember appearance. <br />NOTE: We recommend that you use a piece of paper, cardboard as a shield to mask the log grate and <br />budder from overspray (see below). <br />Scan this code with a OR <br />reader on your cell phone to <br />watch a video of the setup. <br />@0 a <br />M <br />ryM://vlm[o.[oM3B9a2373l <br />NOTE: If power is supplied, turn the rheostat until the embers have a realistic and aesthetically pleasing <br />appearance. Use the remote to turn the Ember-GIo lights on and off. <br />0 Travis Industries 4/26t2(123 -1521 430 EG GSR2 <br />