Valdez Construction 6/12/2023 - Laserfiche WebLink

City of Everett 01 72 29- 7 Inductive Charging Infrastructure for Everett Transit D. Patch miscellaneous holes, gouges, scrapes, penetrations and other damaged surfaces on existing construction. E. Patch using durable materials and methods, suitable to physical characteristics, tolerances, and expansion coefficients of materials being patched. Where feasible, inspect and test patched areas to verify integrity of installation. F. Where cutting and removing of existing material results in uneven finished surfaces, perform work as necessary to establish even, uniform surface of same color and pattern as original work. Where this is impractical, verify with Architect and proceed as directed. G. Where patch cannot be made invisible at a continuous surface, prepare and extend final finish over to next natural break in surface, including wall and floor lines, wall corner edges, and wall and ceiling intersections. 1. Restore exposed finishes of patched areas and extend finish restoration into adjoining areas to eliminate evidence of patching and refinishing. 2. Where patching occurs at painted surface, extend paint finish coating over entire unbroken surface. Recoat as necessary to conform to appearance requirements of Section 09 9000. 3. Restore feature strips and other visual elements original condition existing prior to cutting and patching. H. Where removal of walls and partitions extends one finished area into another, patch and repair floor and wall surfaces in new space, provide an even transition of uniform surface, color, and appearance. Include removal and replacement of wall and floor finishes and coverings. 1. Patch, repair, and reinstall existing ceilings and associated mechanical and electrical work as necessary to make flat and level surfaces of uniform appearance. 2. Refinish entire housing and finished surfaces for pieces of exposed equipment to make uniform in appearance. I. Patch to maintain fire-resistive construction at construction joints, voids, openings, and penetrations in conformance to Section 07 84 00. 3.6 SURFACES COATED WITH LEAD-BASED PAINT A. Refer to Section 01 35 44 and Drawing HZ1 for information on surfaces known to be coated with lead-based paint. 3.7 ADJUSTING A. Make repairs or replace cutting and patching work not conforming to specified requirements. B. Repair damage to work resulting from work of this Section, as directed by Architect. Reimburse Owner for damage to original construction, deducted from Contract Sum. 01 72 29- 7 CUTTING AND PATCHING