Laserfiche WebLink
10 Installation • Qualified Installers Only) <br /> Electrical Requirements <br /> • This heater requires a standard 120 volt, 60 Hz -grounded electrical outlet. Do not use an <br /> adapter plug or sever the grounding plug. <br /> • This heater requires correct polarity. The line (hot) is on the right and has a smaller plug. The <br /> neutral (common) is on the left and has a larger plug. Use a circuit tester(available at hardware <br /> stores) or contact an electrician to verify correct polarity and grounding. <br /> 0 <br /> WARNING: CONNECTION TO A REVERSE POLARITY OR UN-GROUNDED CIRCUIT MAY <br /> DAMAGE YOUR HEATER'S CIRCUIT BOARD. THIS MAY CAUSE A SAFETY HAZARD, <br /> IMPROPER OPERATION, AND VOID YOUR WARRANTY. <br /> • Do not route the electrical cord underneath, in front of, or over the heater. <br /> HINT: Travis Industries manufactures a Insert Wiring Kit (97200315)that allows the power cord to <br /> be routed through the fireplace, concealing the power cord. <br /> ©Travis Industries 4070806 100-01191000 <br />