7505 HARDESON RD BETHEL CHURCH 2023-10-25

(E) POTTER AFC-1 000 The Symbol of Protection Fire Alarm Control Panel SLC Features RA-6075R—2 x 16 LCD annunciator with a key pad in a locked The Potter protocol is a digital protocol with a proven design for metal enclosure. reliability and noise immunity.The system does not require special RA-6500R(F)—4 x 40 LCD annunciator with a key pad in a locked cable or conductors for connection of the Signaling Line Circuit metal enclosure.Flush mount version available. as long as the cable is compliant with NFPA 70 and NFPA 72. LED-16(F)—16 LED annunciator with common indicators in a The system allows for Class A or Class B installations as well as locked metal enclosure.Flush mount version available. "T-Taps."Each loop is capable of 127 points,with a max wiring PSN-1000(E)—10 amp,remote intelligent power supply with distance of 10,000 ft. 6 NACs,2 Inputs and a P-Link repeater.This panel is listed in conjunction with the AFC-100 as releasing circuits Sensor Features CA-6500—Class A convertor that converts the SLC,NACs and The sensors through the fire alarm control panel provide a real P-Link connection time status as to the condition of the system.The smoke detector UD-2000—UL listed,Dual line telephone alarm communicator sensitivity,heat detector temperature level and drift compensation DRV-50—LED driver expander,used to connect up to 50 LEDs in a are all programmable options.The system also allows for a day/night graphic display mode where the panel automatically adjusts the sensitivity depending FCB-1000—Fire communication bridge,provides remote mounting on the time of day.To assist in the reduction of false alarms,the of the Ethernet connection smoke detectors also have a maintenance warning that sends a trouble signal when a detector is dirty to the point that it can no longer FIB-1000—Fiber interface module,used to extend P-Link to multi- maintain the programmed sensitivity. mode fiber(2 required) RLY 5—Relay module,provides 5 form C relay contacts rated at 3.0 User Interface amps24VDC/125AC The fire alarm control panel has a 4 x 40 LCD display to provide SPG-1000—Serial parallel gateway,allows for the connection to a information to the system status.The keypad has navigation keys serial or parallel printer to allow manipulation of the Menu on board the panel.The panel is The FIB-1000,FCB-1000 and the SPG-1000 may be installed in the shipped standard with the following LEDs: stacker bracket or ordered with the optional rack mount enclosure. • AC Power-Green MC-1000 Multi-Connect allows up to sixty-three AFC series panels • Alarm-Red to share a single reporting technology. • Earth Fault-Amber IDC-6—Initiating device circuit provides 6 programmable inputs • Supervisory-Amber AE-2—Two card expansion cabinet • Silenced-Amber AE-8—Eight card expansion cabinet • Trouble-Amber AE-14—Fourteen card expansion cabinet • Pre-Release-Amber • Release-Red Ethernet/I.P. Connection The AFC-1000 is shipped standard with an Ethernet connection. The common buttons include a Silence,Reset,Acknowledge,and This connection is the programming port and may be connected Drill.All of the buttons are accessible once the locked door is to a building Wide Area Network(WAN)or Local Area Network opened. (LAN).Once connected to the Internet,the panel may be selectively programmed to e-mail alarm conditions,trouble conditions, P-Link supervisory conditions,test,Event History and detector status.An The AFC-1000 has a proprietary communication protocol that e-mail may be sent to the panel and the panel will e-mail the event communicates through a RS-485 connection to field devices.Up history,detector status,configuration file or server status to an to 64 devices may be connected to a single P-Link connection.The authorized E-mail account.In addition,reminders may be set to send P-Link includes the communication terminals and regulated 24 VDC an e-mail for service,testing or other conditions. connection for the field devices.The field devices may be any of the following: In addition,the Ethernet connection is UL listed as an IP communicator.The IP communicator is listed to report to the UL PAD100-SLOE-Analog/Addressable loop expansion module listed Sur-Gard III IP receiver.The IP communicator replaces the SLCE-127-Nohmi addressable loop expansion module for retrofit traditional less reliable alarm communicator transmitter that utilized applications. telephone lines.The IP communicator is an active method of connection and communication to the monitoring station. Potter Electric Signal Company, LLC St. Louis, MO Phone: 800-325-3936 www.pottersignal.com 8830136-REV K 5/23 PAGE 4 OF 5