Laserfiche WebLink
Cr POTTER <br />The Symbol of Protection <br />Locking Feature <br />The PAD100-6DB and PAD100-4DB include a locking feature that <br />prevents removal of the detector without using a tool. <br />1. To eliminate this feature, break off the locking tab (refer to Figure <br />1), and then install the detector. <br />Fig. 1 <br />2. To remove the detector from the base when the locking feature has <br />been enabled, insert a small screw driver into the slot on the base to <br />push the plastic tab while simultaneously turning the detector head <br />counter -clockwise. <br />Fig. 2 <br />Insert small screwdr <br />into slot to remove <br />detector from base. <br />PAD100-4DB/6DB <br />4"/6"Addressable Detector Base <br />Wiring Diagram <br />Fig. 3 <br />To FA( <br />Loop (I <br />Ordering Information <br />Model <br />Description <br />Stock No. <br />PAD100-6DB <br />6" Sensor Base <br />13992732 <br />PAD100-41)B <br />4" Sensor Base <br />13992731 <br />Potter Electric Signal Company, LLC St. Louis, MO Phone: 800-325-3936 www.pottersignal.com <br />PRINTED IN USA 8830107 -REV B • 12/17 PAGE 2 OF 2 <br />