Laserfiche WebLink
In-Line Releasing Device g0v • <br /> Installation Instructions JrKidde Fenwal <br /> Effective: November 2004 <br /> DESCRIPTION PROCEDURE <br /> The In-Line Releasing Device, P/N 06-220023-001, is used 1. The In-Line Releasing Device is polarity-sensitive and <br /> to make a single-or dual-solenoid releasing circuit power must be connected as shown in Figure 2 for a single- <br /> limited. See Figure 1. solenoid circuit or as shown in Figure No. 3 for a dual- <br /> solenoid circuit. <br /> 2. The red lead of the In-Line Releasing Device must be <br /> connected to the field wiring from Terminal 1 of the re- <br /> Figure 1. In-Line Releasing Device leasing circuit. The black lead must be connected to <br /> the control head or solenoid valve. <br /> SUPPLIED PARTS 3. Use wire nuts to connect the In-Line Releasing Device <br /> • In-Line Releasing Device, P/N 06-220023-001 to field wiring and leads from control heads and sole- <br /> noid valves. <br /> REQUIRED TOOLS <br /> • No. 2 Flat-Head Screwdriver. <br /> • Small Flat-Head Screwdriver. <br /> Red Black Control Head for Agent Storage <br /> 1 Red Container <br /> or <br /> 2 In-Line Releasing Device Black Solenoid Valve for Sprinkler <br /> System <br /> 3 <br /> 4 <br /> Release-or Combo- <br /> Circuit Terminals - <br /> JUNCTION BOX <br /> (enlarged for clarity) <br /> Note: <br /> Junction box for In-Line Releasing Device must be close nippled to control head or enclosure for solenoid valve. <br /> Figure 2. Single-Control-Head or-Solenoid Releasing Circuit <br />