Laserfiche WebLink
Hilti PROFIS Engineering 3.0.82 <br />www.hilti.com <br />Company: Page: 9 <br />Address: Specifier: <br />Phone I Fax: E-Mail: <br />Design: Concrete - Jan 13, 2023 Date: 1/13/2023 <br />Fastening point: <br />7 Installation data <br />Profile: no profile <br />Hole diameter in the fixture: df = 0.812 in. <br />Plate thickness (input): 0.500 in. <br />Recommended plate thickness: not calculated <br />Drilling method: Hammer drilled <br />Cleaning: Manual cleaning of the drilled hole according to instructions for use is <br />required. <br />Anchor type and diameter: Kwik Bolt TZ2 - CS 3/4 (4 3/4) <br />hnom3 <br />Item number: 2210313 KB-TZ2 3/4x7 <br />Maximum installation torque: 1,324 in.lb <br />Hole diameter in the base material: 0.750 in. <br />Hole depth in the base material: 5.750 in. <br />Minimum thickness of the base material: 8.000 in. <br />Hilti KB-TZ2 stud anchor with 5.5 in embedment, 3/4 (4 3/4) hnom3, Carbon steel, installation per ESR-4266 <br />7.1 Recommended accessories <br />Drilling <br />• Suitable Rotary Hammer <br />• Properly sized drill bit <br />Coordinates Anchor [in.] <br />Anchor x y <br />1 -0.000 0.000 <br />Cleaning <br />• Manual blow-out pump <br />C-x c+x c-y c,y <br />12.000 12.000 12.000 12.000 <br />Input data and results must be checked for conformity with the existing conditions and for plausibility! <br />PROFIS Engineering ( c ) 2003-2023 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan <br />Setting <br />• Torque wrench <br />• Hammer <br />K <br />9 <br />