3003 W CASINO RD BLDG 40-41 2024-03-01

SmartOne® or Kidde Addressable Relay Output Device Fire Systems K-76-018 Effective: May 2020 FEATURES • Full-Digital Communications • Addressable Control Point • Unpowered,SPDT Relay Contacts • Control-by-Event And/or By Time Operation • Status Indicator • Unique Internal Supervision UL Listed • FM Approved °` '' ' ="JJ • CSFM Approved DESCRIPTION The SmartOne® Addressable Relay Output Device (AO) is an SPECIFICATIONS addressable output module for control of auxiliary equipment Input Voltage: 24 VDC(nominal) such as air handlers, door release and elevator recall. The AO connects directly to a compatible control unit's Signaling Standby Current: 500 NA,Typical Line Circuit(SLC) and contains a SPDT relay to control auxiliary Alarm Current: 500 NA,Typical equipment. All of the electronics are contained in a small high- impact polymer case. This creates a small and durable device for Contact Ratings: installation. A silicone-free module is available for applications Resistive: 2 A @ 30 VDC where silicone is not desired.The AO can be mounted in a North Inductive(Motor Control): 1.0 A @ 30 VDC,0.60 PF American 1-1/2-in. (64 mm) deep 1-gang box, or standard 4-in. 0.6 A @ 120 VAC,0.35 PF square box 1-1/2-in. (38 mm)deep with a cover. Pilot Duty: 0.6 A @ 30 VDC,0.35 PF FIELD PROGRAMMING Operating Environment: -31 to 151°F(-35 to 66°C)at The AO is field programmable with a unique 3-digit address and a 0 to 95%RH 40-character owner location message. The AO relay may be set or reset on command from the control unit. In addition to combi- national-logic programming that utilizes system inputs (i.e., LED Pulse Modes: events) to activate this device, the unit may be programmed for Normal: 9 second interval real-time clock operation. The real-time clock programming Trouble: LED is off permits the AO to be activated and deactivated by the time of day, Alarm: 2 second interval calendar date and day of the week. Wire Sizes: 14, 16, 18 AWG Acceptable SUPERVISION The AO is continuously monitored for: Dimensions: 2.3"x 1.8"x 0.8"nominal • Internal power supply voltages Shipping Weight: 5.1 oz(145 g) • Faulty entering of data into AO's memory • Relay state equals command state COMPATIBLE CONTROL UNITS An internal set of relay contacts provides a feedback signal that Fire Alarm Control Current Legacy confirms the activation of the addressable relay output. If the Unit(FACU)Type Product Product relay fails to operate at the appropriate time, the device transmits a trouble report for display by the control unit. Single Loop ARIES°-SLX ARIES FenwaINET T" 6000 STATUS LED PEGAsysTI A status LED is mounted on the unit. FenwaINET 2000 ORDERING INFORMATION Multiple Loop ARIES®-MLX ARIES NETLink FenwaINET 8000-ML AO Control Module 70-408004-001 PEGAsys* AO Control Module,non-silicone 70-408014-001 FenwaINET 2000 *FACUs running software revision 82.4 are compatibility-tested but SmartOne and ARIES are registered trademarks of Kidde-Fenwal,Inc.,or its not agency listed with the device(s)in this data sheet. parents,subsidiaries or affiliates. This literature is provided for informational purposes only.KIDDE-FENWAL,INC.believes this data to be accurate,but it is published and presented without any guarantee or warranty whatsoever.KIDDE-FENWAL,INC.assumes no responsibility for the product's suitability fora particular application.The fire suppression system design,installation,maintenance,service and troubleshooting must be performed by trained,authorized Kidde Fire Systems distributors for the product to work correctly. If you need more information on this product,or if you have a particular problem or question,contact: KIDDE-FENWAL,INC.,Ashland,MA 01721 USA,Telephone:(508)881-2000. EXPORT INFORMATION(USA) Kidde Fire Systems400 Main Street Kidde K-76-018 Rev AB Jurisdiction:EAR Ashland,MA 01721 ©2020 Kidde-Fenwal,Inc. Classification:EAR99 Ph:508.881.2000 Fire Systems This document contains technical Fax:508.881.8920 data subject to the EAR. www.kiddefiresystems.com