Laserfiche WebLink
Page 5 of 6 <br /> VK1021 STANDARD <br /> • TECHNICAL DATA RESPONSE PENDENT <br /> SPRINKLER (K5.6) <br /> The Viking Corporation,210 N Industrial Park Drive, Hastings MI 49058 <br /> Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email: techsvcs@vikingcorp.com <br /> Visit the Viking website for the latest edition of this technical data page www.vikinggroupinc.com <br /> 1. Install the escutcheon inner ring 2.Carefully slide the wrench**sideways 3.Install the sprinkler and escutcheon <br /> onto the sprinkler threads. around the protective cap then push assembly into the pipe fitting. Be sure <br /> upwards to engage with the sprinkler the escutcheon outer ring contacts <br /> wrench flats. the surface of the finished ceiling. <br /> 10 <br /> • <br /> t t <br /> t t <br /> Figure 3: Recessed Installation (with Recessed Socket Wrench) <br /> "A 1/2"ratchet is required(not available from Viking). <br /> 1. Install the escutcheon inner ring 2.Carefully slide the wrench sideways <br /> onto the sprinkler threads. around the protective cap then <br /> push upwards to engage with the <br /> sprinkler wrench flats. <br /> • <br /> .113 <br /> • � ,' <br /> t <br /> 3.Install the sprinkler and <br /> escutcheon assembly into the pipe <br /> fitting. Be sure the escutcheon <br /> outer ring contacts the surface of <br /> the finished ceiling. <br /> a'. <br /> • • . <br /> • <br /> Figure 4: Recessed Installation (with standard Installer's Wrench) <br /> Form No. F_020416 21.01.20 Rev 21.1 <br />