3000 ROCKEFELLER AVE 2023 COURTHOUSE Plans 2024-03-07

Submittal Information for Spears° Manufacturing Company SPEARS FlameGuard ° CPVC Fire Sprinkler System Date: 1/4/2023 GSFG-0221 Job Name: SCC SUPPORT TI Location: EV E R ETT, WA Engineer: Contractor: Scope: and ASTM F438 or F439 for fittings. Pipe and cement shall have This submittal covers the Spears®FlameGuard®CPVC Fire Sprinkler GREENGUARD GOLD marking. System suitable for residential and light hazard occupancies in Installation: accordance with The National Fire Protection Association (NFPA). Spears® FlameGuard® CPVC Fire Sprinkler System shall carry a The FlameGuard®System shall be sold as a complete system which working pressure of 175 psi @ 150F(1.2 MPa @ 66°C)and shall be consists of pipe, fittings and a specially formulated one-step installed in accordance with Spears® Manufacturing Company primerless cement intended for use in wet, dry and pre-action FlameGuard®CPVC Fire Sprinkler Products Installation Instructions systems in residential and light hazard Applications where the (FG-3) and Addendums. National Fire Protection Association operating temperature/pressure does not exceed 175psi @ 150° F. (NFPA) Standards 13, 13D, and 13R must be referenced for design (1.2 MPa @ 66°C) and installation requirements in conjunction with the Installation Instructions and applicable local codes. Installation practices such as Product Specification: pipe support spacing, bracing, allowance for thermal All CPVC fire sprinkler fittings and pipe shall be Spears® expansion/contraction, solvent cementing and handling and storage FlameGuard®. All solvent cement shall be Spears® FS-5 One Step, shall be in accordance with the manufacturer's instructions and this and all thread sealant shall be Spears® Blue 75TM as produced by Spears®Manufacturing Company. specification, Buried pipe shall be in accordance with NFPA 24 for supply mains. The piping system shall be joined using a chemically All Spears® FlameGuard® CPVC fire sprinkler fittings shall be resistant one-step primerless solvent cement joining process manufactured in the U.S.A. from a Chlorinated Polyvinyl Chloride conforming to ASTM F493. The system shall be protected from ultra (CPVC) compound having a minimum cell classification of 23447 in violet(UV)light exposure from the sun or other source and protected accordance with ASTM D1784. Fittings shall be manufactured in from any chemicals that are not compatible with the CPVC materials strict compliance to ASTM F438 or F439,as applicable.All CPVC fire including but not limited to fire stopping materials, plasticizers, sprinkler piping shall be manufactured in the U.S.A. from a incompatible thread sealants,etc. Chlorinated Polyvinyl Chloride(CPVC)compound having a minimum cell classification of 23447 in accordance with ASTM D1784. Piping NOTE: FlameGuard® CPVC piping systems can be leak shall be manufactured in strict compliance to ASTM F442.All CPVC tested using oil-free compressed air up to 25psi but must also solvent cement shall be a primerless, one-step type manufactured in be hydrostatically tested as required per NPFA standard. strict compliance to ASTM F493 and approved for use with CPVC fire sprinkler systems. All CPVC fire sprinkler fittings, pipe and solvent Referenced Standards: cement shall be listed by Underwriters Laboratories (UL®), ASTM D1784—Rigid Vinyl Compounds ASTM F438— CPVC Schedule 40 Fittings Underwriters Laboratories Canada (ULC®) and/or Factory Mutual ASTM F439— CPVC Schedule 80 Fittings Research Corporation(FM Global)and/or LPCB for use in residential ASTM F442 — CPVC SDR Pipe and light hazard wet, dry and pre-action systems and bear their ASTM F493 — Solvent Cements for CPVC Pipe&Fittings authorized certification marks. Thread sealant shall be approved by NFPA 13,13D,13R—National Fire Protection Association Standards the fitting manufacturer for use with CPVC fire sprinkler products. All NFPA 24—Installation—Private Fire Service Mains CPVC fittings, pipe, solvent cement and thread sealant shall be NSF International Standard 14/61—Potable Water certified by NSF International as applicable. Pipe and solvent Approvals: cement shall be certified to UL 2818 GREENGUARD GOLD. NSF®—NSF International Standard 14/61—Potable Water Underwriters Laboratories—Listing Agency FM Global—Listing Agency Product Marking: UL-GREENGUARD GOLD Certified UL 2818 FlameGuard® system components shall be orange in color for LPCB—Loss Prevention Council Board identification and include required markings and approvals prescribed in ASTM F442 for pipe Spears°Manufacturing Company• 15853 Olden Street Sylmar,CA 91342 • (818)364 1611 •www.spearsmfg.com