2232 12TH ST 2024-05-22 - Laserfiche WebLink

(E) POTTER IPA-4000 The Symbol of Protection Fire Alarm Control Panel SLC Features RA-6075R—2 x 16 LCD annunciator with a key pad in a locked The Potter protocol is a digital protocol with a proven design for metal enclosure. reliability and noise immunity.The system does not require special RA-6500R(F)—4 x 40 LCD annunciator with a key pad in a locked cable or conductors for connection of the Signaling Line Circuit metal enclosure.Flush mount version available. as long as the cable is compliant with NFPA 70 and NFPA 72. LED-16(F)—16 LED annunciator with common indicators in a The system allows for Class A or Class B installations as well as locked metal enclosure.Flush mount version available. "T-Taps."Each loop is capable of 127 points,with a max wiring PSN-1000(E)—10 amp,remote intelligent power supply with distance of 10,000 ft. 6 NACs,2 Inputs and a P-Link repeater.This panel is listed in Sensor Features conjunction with the IPA-4000 as releasing circuits. The sensors through the fire alarm control panel provide a real CA-6500—Class A convertor that converts the SLC,NACs and time status as to the condition of the system.The smoke detector P-Link connection sensitivity,heat detector temperature level and drift compensation UD-2000—UL listed,Dual line telephone alarm communicator are all programmable options.The system also allows for a day/night DRV-50—LED driver expander,used to connect up to 50 LEDs in a mode where the panel automatically adjusts the sensitivity depending graphic display on the time of day.To assist in the reduction of false alarms,the FCB-1000—Fire communication bridge,provides remote mounting smoke detectors also have a maintenance warning that sends a trouble of the Ethernet connection signal when a detector is dirty to the point that it can no longer FIB-1000—Fiber interface module,used to extend P-Link to multi- maintain the programmed sensitivity. mode fiber(2 required) User Interface RLY 5—Relay module,provides 5 form C relay contacts rated at 3.0 The fire alarm control panel has a 4 x 40 LCD display to provide amps 24VDC/125AC information to the system status.The keypad has navigation keys SPG-1000—Serial parallel gateway,allows for the connection to a to allow manipulation of the Menu on board the panel.The panel is serial or parallel printer shipped standard with the following LEDs: The FIB-1000,FCB-1000 and the SPG-1000 may be installed in the • AC Power-Green stacker bracket or ordered with the optional rack mount enclosure. • Alarm-Red MC-1000 Multi-Connect allows up to sixty-three IPA series panels to share a single reporting technology. • Earth Fault-Amber IDC-6—Initiating device circuit provides 6 programmable inputs • Supervisory-Amber AE-2—Two card expansion cabinet • Silenced-Amber AE-8—Eight card expansion cabinet • Trouble-Amber AE-14—Fourteen card expansion cabinet • Pre-Release-Amber Ethernet/I.P. Connection • Release-Red The IPA-4000 is shipped standard with an Ethernet connection. This connection is the programming port and may be connected The common buttons include a Silence,Reset,Acknowledge,and to a building Wide Area Network(WAN)or Local Area Network Drill.All of the buttons are accessible once the locked door is (LAN).Once connected to the Internet,the panel may be selectively opened. programmed to e-mail alarm conditions,trouble conditions, P-Link supervisory conditions,test,Event History and detector status.An e-mail may be sent to the panel and the panel will e-mail the event The IPA-4000 has a proprietary communication protocol that history,detector status,configuration file or server status to an communicates through a RS-485 connection to field devices.Up authorized E-mail account.In addition,reminders maybe set to send to 64 devices may be connected to a single P-Link connection.The an e-mail for service,testing or other conditions. P-Link includes the communication terminals and regulated 24 VDC connection for the field devices.The field devices may be any of the In addition,the Ethernet connection is UL listed as an IP following: communicator.The IP communicator is listed to report to the UL PAD100-SLCE-Analog/Addressable loop expansion module listed Sur-Gard III IP receiver.The IP communicator replaces the (maximum of 31 per IPA-4000) traditional less reliable alarm communicator transmitter that utilized telephone lines.The IP communicator is an active method of connection and communication to the monitoring station. Potter Electric Signal Company, LLC St. Louis, MO Phone: 800-325-3936 www.pottersignal.com 8830102-REV J 5/23 PAGE 4 OF 5