Laserfiche WebLink
18 <br /> <br />they shall be performed within 7 days, or within the shortest practicable time frame <br />as approved by the Director. <br />D. The material that is removed in the process of cleaning a GRS shall not be <br />discharged back into the GRS, any part of the POTW, any private sewer, any <br />drainage piping, waters of the state, or storm sewer system. The practices of <br />stacking and decanting are strictly prohibited. All materials removed shall be <br />handled and disposed of in accordance with Federal, State, County and Local laws, <br />rules and regulations. <br />E. In addition to the maintenance required above, Automatic Grease Removal <br />Systems shall be maintained in accordance with the manufacturers’ guidelines. <br /> <br />3.4 Grease Removal System Additives <br /> <br />No user may use an additive of any type for the GRS without the approval of the Director. <br />The Director will adopt procedures for the approval of additives. <br /> <br />No vendor may sell, attempt to sell or otherwise distribute any additive in the City of <br />Everett without prior approval of the additive by the Director. Any vendor selling, or <br />attempting to sell, or otherwise distributing any additive intended for use in a GRS that has <br />not been approved for use by the Director is in violation of this ordinance and is subject to <br />all enforcement actions contained herein. <br /> <br />3.5 Solids Interceptor <br /> <br />If a garbage disposal/garbage grinder/macerator or similar unit is installed in a kitchen, it <br />must discharge to the GRS through a solids interceptor plumbed immediately after the <br />garbage disposal/garbage grinder/macerator or similar unit. The solids interceptor shall be <br />maintained in proper operating condition at all times there is flow through it. <br /> <br />3.6 Grease Removal System Sizing <br /> <br />A. Hydromechanical Trap-style grease removal systems shall be sized in accordance <br />with the standards in the currently adopted Plumbing Code. But in no case shall <br />they be rated at less than 20 GPM without express approval by the Director. <br /> <br />B. The minimum size for an interceptor-style grease removal system shall be <br />determined using the following table: <br />