Laserfiche WebLink
32 <br /> <br />the following: <br /> <br /> (a) Regulated or manufacturing process streams; and <br /> <br /> (b) Other streams as necessary to allow use of the combined <br />wastestream formula of 40 CFR 403.6(e) if required. <br /> <br /> (2) Non-Categorical User <br /> <br />The user shall submit information showing the measured average daily <br />and maximum daily flow, in gallons per day, to the POTW from each of <br />the following: <br /> <br /> (a) Total process flow, wastewater treatment plant flow, total plant <br />flow or individual manufacturing process flow as required by the <br />Director. <br /> <br />The City may allow for verifiable estimates of these flows where <br />justified by cost or feasibility considerations. <br /> <br /> E. Measurements of pollutants. <br /> <br /> (1) Categorical User: <br /> <br /> (a) The user shall identify the applicable pretreatment standards for <br />each regulated or manufacturing process. <br /> <br /> (b) In addition, the user shall submit the results of sampling and <br />analysis identifying the nature and concentration (and/or mass) <br />where required by the Categorical Pretreatment Standard or as <br />required by the City of regulated pollutants (including standards <br />contained in Sections 2.1 through 2.4 of this ordinance, as <br />appropriate) in the discharge from each regulated or <br />manufacturing process. Both daily maximum and average <br />concentration (and/or mass, where required) shall be reported. <br />The sample shall be representative of daily operations and shall <br />conform to sampling and analytical procedures outlined in Section <br />5. <br /> <br /> (c) The user shall take a minimum of one representative sample to <br />compile that data necessary to comply with the requirements of <br />this paragraph. <br /> <br /> (d) Where an alternate concentration or mass limit has been