Laserfiche WebLink
Specifications <br /> Architectural/Engineering Specifications <br /> Mechanical heat detector shall be a System Sensor 5600 series model number ,listed to Underwriters Laboratories UL 521 for Heat Detectors for Fire <br /> Protective Signaling Systems.The detector shall be either a single-circuit or a dual-circuit type,normally open.The detector shall be rated for activation at either <br /> 135°F(57°C)or 194°F(90°C),and shall activate by means of a fixed temperature thermal sensor,or a combination fixed temperature/rate-of-rise thermal sensor. <br /> The rate-of-rise element shall be activated by a rapid rise in temperature,approximately 157(8.3°C)per minute.The detector shall include a reversible mounting <br /> bracket for mounting to 31/2-inch and 4-inch octagonal,single gang,and 4-inch square back boxes with a square to round plaster ring.Wiring connections shall <br /> be made by means of SEMS screws that shall accommodate 14-22AWG wire.The detector shall contain alphanumeric markings on the exterior ofthe housing <br /> to identify its temperature rating and activation method.The rate-of-rise element of combination fixed temperature/rate-of-rise models shall be restorable,to <br /> allow for field-testing.The detectors shall include an external collector that shall drop upon activation to identify the unit in alarm. <br /> Physical/Operating <br /> Maximum Installation Temperature 5601 P,5603,5621,and 5623:100°F(38°C) <br /> 5602,5604,5622,and 5624:150°F(65.6°C) <br /> Operating Humidity Range 5 to 95%RH non-condensing <br /> Dimensions with mounting bracket Diameter:4.57 inches(11.6cm) <br /> Height: 1.69 inches(4.3cm) <br /> Alarm Temperature 5601 P,5603,5621,and 5623:1357(57°C) <br /> 5602,5604,5622,and 5624:1947(90°C) <br /> Weight 6 oz.(170 grams) <br /> Rate-of-Rise Threshold 150F(8.3°C)rise per minute(models 5601 P,5602,5621,and 5622 only) <br /> Mounting 31/2-inch octagonal back box <br /> 4-inch octagonal back box <br /> Single gang back box <br /> 4-inch square back box with a square to round plaster ring <br /> Electrical Specifications <br /> Operating Voltage/Contact Ratings 6-125VAC/3A <br /> 6-28VDC/1 A <br /> 125VDC/0.3A <br /> 250VDC/0.1 A <br /> Input Terminals 14-22 AWG <br /> aov xi x� boa/xi <br /> 0 O O 0 0 <br /> 5601P 5602,5622 5603,5623 5604,5624 5621 <br /> Ordering Information <br /> Identification Method Temperature <br /> Model Circuit on Exterior Rating Activation UL Protected Spacing-10 Foot Ceiling* <br /> 5601 P Single None 135°F(57°C) Fixed Temperature/Rate-of-Rise 50 feet x 50 feet(15.24m x 15.2m) <br /> 5602 Single Lettering 1940F(90°C) Fixed Temperature/Rate-of-Rise 50 feet x 50 feet(15.24m x 15.2m) <br /> 5603 Single Lettering 135°F(57°C) Fixed Temperature 25 feet x 25 feet(7.62m x 7.62m) <br /> 5604 Single Lettering 194°F(90°C) Fixed Temperature 25 feet x 25 feet(7.62m x 7.62m) <br /> 5621 Dual Lettering 1350F(57°C) Fixed Temperature/Rate-of-Rise 50 feet x 50 feet(15.24m x 15.2m) <br /> 5622 Dual Lettering 194°F(90°C) Fixed Temperature/Rate-of-Rise 50 feet x 50 feet(15.24m x 15.2m) <br /> 5623 Dual Lettering 135°F(57°C) Fixed Temperature 25 feet x 25 feet(7.62m x 7.62m) <br /> 5624 Dual Lettering 1940F(90°C) Fixed Temperature 25 feet x 25 feet(7.62m x 7.62m) <br /> *NOTE:Refer to NFPA72 guidelines for spacing reductions when ceiling heights exceed 10 feet. <br /> f_ SYSTEM withoutm2change or. <br /> 3825 Ohio Avenue•St.Charles,IL 60174 Product specifications subject to change Sys emoensotice.Vsit rystemsen occom for <br /> SENSOR Phone:800-SENSOR2•Fax:630-377-6495 urrentproductinform05-03 latest <br /> A06-0351-002.11/06•#1676 <br />