Laserfiche WebLink
(�1(sPF/FiNVIL )>) DUCTILE IRON THREADED FITTINGS 61')ANY11. <br /> FIG. 3202 <br /> 45° Elbow <br /> "43 <br /> C UL US FM <br /> LISTED APPROVED <br /> A 1 <br /> :. 1 For ListingsrApproval details and Limitations, <br /> visit our website at www.anvilintl.com or <br /> 1 contact an Anvir Sales Representative. <br /> FIGURE 3202 - 45° ELBOW MATERIAL SPECIFICATIONS <br /> Nominal Size Maximum Dimension A Approx.Wt.Each Dimensions: ASME B 16.3 <br /> Working Pressure. <br /> In.(mm) PSI(kPa) In.(mm) tbs.(kg) Material: ASTM A536 Grade 65-45-12 <br /> 1 500 1.12 0.46 Finish: Black <br /> 11/4 500 1.29 0.73 Threads: NPT per ASME B1.20.1 <br /> 11/2 5000 1.43 0.92 Agency Approvals: All ductile iron threaded fittings are <br /> UL/ULC Listed and FM Approved. <br /> 2 500 1.68 1.50 <br /> NOTICE:Ductile iron fittings have higher tensile strength than that of steel pipe. <br /> ♦—Working Pressure Ratings are for reference only and based on Sch.40 pipe.For the Therefore,over tightening can cause damage to pipe threads which may cause <br /> latest UL/ULC,and FM pressure ratings versus pipe schedule,please visit anvilintl.com or leakage.Ductile iron fittings should be tightened approximately three turns beyond <br /> contact your local Anvil Representative. hand tight,but no more than four turns. <br /> PROJECT INFORMATION APPROVAL STAMP <br /> Project: ['Approved <br /> Address: ❑Approved as noted <br /> Contractor: ❑Not approved <br /> Engineer: Remarks: <br /> Submittal Date: <br /> Notes 1: <br /> Notes 2: <br /> SPF/DI-1.15 <br />