Laserfiche WebLink
(cspF/FiNYIt:),) DUCTILE IRON THREADED FITTINGS (113ANVIL <br /> FIG. 3224 <br /> Cap <br /> c UL uS FM <br /> A LISTED APPROVED <br /> For Listings/Approval Dela&and Limitations, <br /> visit our website at www.anvilinll.can or <br /> contact an Anvil"Sales Representative. <br /> FIGURE 3224 - CAP MATERIAL SPECIFICATIONS <br /> • <br /> Nominal Size Maximum Dimension A Approx.Wt.Each Dimensions: ASME B 16.3 <br /> Working Pressure. <br /> rn(mm) PSI(kPa) In.(mm) lbs.(kg) Material: ASTM A536 Grade 65-45-12 <br /> 1 500 1.16 0.32 Finish: Black <br /> 11/4 500 1.28 0.43 Threads: NPT per ASME B1.20.1 <br /> 11/ 500 1.33 0.60 Agency Approvals: All ductile iron threaded fittings are <br /> UL/ULC Listed and FM Approved. <br /> 2 500 1.45 0.91 <br /> NOTICE:Ductile iron fittings have higher tensile strength than that of steel pipe. <br /> ♦-Working Pressure Ratings are for reference only and based on Sch.40 pipe.For the Therefore,over tightening can cause damage to pipe threads which may cause <br /> latest UL/ULC,and FM pressure ratings versus pipe schedule,please visit anvilintl.com or leakage.Ductile iron fittings should be tightened approximately three turns beyond <br /> contact your local Anvil Representative. hand tight,but no more than four turns. <br /> PROJECT INFORMATION APPROVAL STAMP <br /> Project: ❑Approved <br /> Address: ❑Approved as noted <br /> Contractor: ❑Not approved <br /> Engineer: Remarks: <br /> Submittal Date: <br /> Notes 1: <br /> Notes 2: <br /> SPF/DI-1.15 <br />