Laserfiche WebLink
Architects and Engineers Specifications <br /> The speaker appliances shall be Wheelock Series ET Speakers and speaker strobe appliances shall be Wheelock Series ET Speaker <br /> . Strobes or approved equals.The speakers shall be UL Listed under Standard 1480 for Fire Protective Service and speakers equipped <br /> with strobes shall be listed under UL Standard 1971 for Signaling Devices for the Hearing-Impaired. In addition, the strobes shall be <br /> certified to meet the requirements of FCC Part 15, Class B. <br /> All speakers shall be designed for a field selectable input of either 25 or 70 VRMS,with selectable power taps from 1/8 watt to 8 watts. <br /> All models shall have listed sound output of up to 93 dB at 10 feet and a listed frequency response of 400 to 4000 Hz. The speaker <br /> shall also incorporate a sealed back construction.All inputs shall employ terminals that accept#12 to#18 AWG wire sizes. <br /> The strobe portion of the appliance shall produce a flash rate of one(1)flash per second over the Regulated Voltage Range and shall <br /> incorporate a Xenon flashtube enclosed in a rugged Lexan®lens. The strobe shall be of low current design. Where, Multi-Candela <br /> Speaker Strobes are specified, the strobe intensity shall have field selectable settings and shall be rated per UL Standard 1971 at <br /> 15/30/75/110cd or 135/185cd for wall mount and 15/30/75/95 cd or 115/177cd for ceiling mount.The selector switch for selecting the <br /> candela shall be tamper resistant.The 1575 strobe shall be specified when 15 candela UL Standard 1971 listing with 75 candela on- <br /> axis is required (e.g.ADA compliance). <br /> When synchronization is required, the strobe portion of the appliance shall be compatible with Wheelock's DSM Sync Modules, <br /> Wheelock Power Supplies or other manufacturers panels with built-in Wheelock Patented Sync Protocol.The strobes shall not drift out <br /> of synchronization at any time during operation. If the sync module or Power Supply fails to operate. (i.e., contacts remain closed),the <br /> strobe shall revert to a non-synchronized flash rate. <br /> The speaker and speaker strobe appliances shall be designed for indoor surface or flush mounting. The speaker and speaker strobe <br /> shall incorporate a speaker mounting plate with a grille cover which is secured with two screws for a level, aesthetic finish and shall <br /> mount to standard electrical hardware requiring no additional trimplate or adapter. <br /> The finish of the Series ET speakers and speaker strobes shall be white, red or nickel plate. <br /> All speakers and speaker strobes shall be backward compatible. <br /> NE M <br /> WE ENCOURAGE AND SUPPORT NICET CERTIFICATION <br /> 3 YEAR WARRANTY <br /> S0310 ET 06/11 <br /> NJ Location <br /> 273 Branchport Ave. <br /> Long Branch,NJ 07740 <br /> P:800-631-2148 <br /> F:732-222-8707 <br /> www.coopernotification.com <br /> Cooper Notification is Wheelock®NEW SAFEPATH° WAVES, ,w° COOPER Notification <br />