1602 HEWITT AVE 2024-12-30 - Laserfiche WebLink

Job Steps Hazards Controls C Place asphalt Exposure to moving Equipment and systems must be checked for proper operation at the start of each shift.Machines must be equipped to grade. pavement with operable service, emergency, and parking brakes. All vehicles must be equipped with a manually-operated equipment and warning device. dump trucks. Ensure personnel involved in work are trained and familiar with job requirements. All personnel shall wear high waterproof work boots, safety goggles or safety glasses, chemical-resistant and heavy-duty gloves, hardhats, high- visibility vests, long-sleeved shirts, sturdy pants, and earplugs. Do not move between the paving machine and backing trucks. Do not work or stand near the hopper of the paving machine when a materials truck is making its initial dump. Idle down any piece of equipment and securely set parking brake before leaving the operators station, even if only for a short time. Do not leave paving machine unattended while the screed is heating. Paving machine operators must signal any time they intend to resume M travel from a stationary position. Never operate a paving machine at speeds which will cause ground personnel to work carelessly.Watch out for co- workers; personnel concentrating on their assigned duties may be completely unaware of possible hazards. Burns from hot Remove any other source of ignition within at least 100' of paving operation. Ensure fire-extinguishing equipment asphalt mix. (foam type) is easily accessible. Exposure to asphalt Workers should wash hands before eating and leaving the work site, using soap or other safe cleaners. It is fumes and solvents. recommended that workers change out of work clothes before going home to prevent bringing asphalt or solvents home.