Laserfiche WebLink
J .E.M. FIX Inc. <br /> SPECIAL EFFECTS DESIGN& <br /> FABRICA TIDN <br /> 24932 Avenue Kearny Suite#3 <br /> Valencia, CA 91355 <br /> (661) 702-1319 Office <br /> (661) 702-0908 Fax <br /> The following shall further define flame effects equipment and engineering services provided by <br /> J.E.M. F/X Inc. to PROFESSIONAL BULL RIDERS—PBR Tour.This equipment has been designed& <br /> engineered for safe and reliable use in the arenas and in close proximity to performers and audience. <br /> Similar portable effects of this size and larger have been provided by our firm to the industry for several <br /> years and have successfully been trooped worldwide.These flame effects have always preformed,operated <br /> safely and without incident. All aspects for flame effects mounting and operation have been reviewed <br /> during the design phase of this project and their descriptions provided below. <br /> Equipment Description <br /> There are a total of four individual flame effects that are to operate during the performance. Each flame <br /> burner shall have one electronic ignition source and an individual LP rated gas solenoid valve fed by a hose <br /> and electrical control umbilical cable. Operation of the flame system relies on the effects technician to <br /> enable the"arm switch"that is assigned to the channel or channels in which are chosen for operation.The <br /> effects technician shall wait for ignition confirmation from the Honeywell Flame Safeguard Controller and <br /> then fire the effect with the pickle or electrical dead man buttons. If the effects technician chooses to <br /> disable or abort the flame effect operation at anytime he may do so by depressing the E-Stop button <br /> (located on the main control panel,described below). The E-Stop button is a main power cut-off for the <br /> entire flame control system and there is NO by pass to the system so any over ride of the system is <br /> prohibited. <br /> The following shall better describe each of the individual effects and there specifications; <br /> *(2)Bullhead will be mounted on the chute gates and or(2)jet cube burners will be positioned and fired <br /> individually on either side of the alley way.The flame heads are capable of generating columns of flame <br /> one to twenty feet in height by one foot in diameter or flame balls two to five foot in diameter and rising up <br /> fifteen feet in height(Depending on clearance to personal and combustibles). The effects technician can <br /> control variations between the two different looks by depressing the fire enable button for longer or shorter <br /> length in time. <br /> *(2)Seven foot line burners will be positioned in the arena in front of the chutes. One on each side of the <br /> alley way entrance. Each line burner will be controlled by the pyrotechnic i an..The flame height is <br /> adjustable from four to six feet and will be set based on the safety factors as judged by the authority having <br /> jurisdiction and the pyrotechnic crew chief.The maximum burn time will be ten seconds and will also be <br /> controlled by the pyrotechnician based on safety factors. <br /> (1) Portable gas storage accumulator,with(4)gas rated solenoids, for distributing gas feed to all <br /> remotely mounted flame cubes,bullheads or line burners.The accumulator shall need(2)201b. LP <br /> gas bottles each for filling of propane vapor.System gas pressure for filling of accumulator shall <br /> be controlled by use of LP rated solenoids interlocked with UL listed gas pressure switch. <br /> (1) Main electronic control for operator interface to all devices in flam system. <br /> '"Vol used on ever show <br />