Laserfiche WebLink
3.1.11 Edit WAVE-Flamer settings <br /> Edit WADE-Flamer <br /> settings <br /> Allows you to change settings of the device. See Chapter3.2. <br /> 3.1.12 Edit DMX settings <br /> Edit DMX <br /> settings <br /> Allows you to change the DMX settings. See Chapter3.3. <br /> 3.1.13 Drivetest <br /> Drivetest <br /> start? <br /> Allows you to start the "Drivetest". This Test checks if all angles can be reached by the moving head <br /> in a given timeframe. If it doesn't reach a position within the limit, it will lead to a timeout, and an <br /> error. This test is relevant if you use external batteries, whose voltage is already below the optimum <br /> value (see 3.1.3),and you still wish to check if all positions can be reached fast enough. <br /> By pushing Mode/OK you enter a sub menu, in which the "Drivetest" can be started. <br /> Press PLUS for <br /> start Drivetest—, <br /> If the Plus-Button is pushed in this menu, the Drivetest will be started. During the Test, all Positions <br /> (except for Position 8, or 0°) are driven to. After the last Position has been reached (Position 15) the <br /> number of errors from 0 to 14 are displayed (see graphic below). <br /> F14 : 20 F15 : 14 <br /> Time error : 0 <br /> Errors at the Drivetest can be a sign for weak batteries. During sequences, you may be facing longer <br /> times because of this. <br /> IA <br /> While the Drivetest is being made, no objects may be placed in the movement zone <br /> of the Swivel Head, and the Head itself may not betouched. <br /> WARNING <br />