Laserfiche WebLink
6 Technical Data <br /> Size: 560 x 330 x 360 mm (WxDxH) <br /> Weight: 25kg(without liquid) <br /> Usable Angles: ±105° (210°total) <br /> Fuel: Bioethanol 100%, Isopropylalcohol, Isobar-H, N-Butanol <br /> Discharge rate: ca. 50ml/Second <br /> Flame height: ca. 10 Meter(no wind) <br /> Fill: 10 Liters <br /> Power supply: 230VAC/350W <br /> Safety distance: 15m in all discharge directions (especially flammable <br /> items) 5m in front and behind the Flamer <br /> Tripod: Tripod connector 35- <br /> 36mm min. 50kg load <br /> 7 Safety hints <br /> The device may only be used if it is good operating condition. Defective devices must be checked <br /> and repaired either by the manufacturer, or an official partner. Under no circumstances may <br /> defective devices be used. <br /> The devices must be placed safely on an adequate place.The device should be placed horizontally <br /> on the ground if possible. <br /> The named safety distances and usage hints from the manual are to be adhered. <br /> After switching the device on, no persons may linger in the danger area of the device, including all <br /> possible discharge locations. All persons working in the show are to be informed about safety <br /> distances, dangers and functions of the device. <br /> The person responsible for controlling the Flamer should always have a direct line of sight to the <br /> device. This person must see to it that the safety distances are kept during the show, and be able <br /> to abort the show if there is danger. <br /> When using DMX, we recommend using an own universe for the X2 Wave-Flamer, separating <br /> Lights and devices. <br /> To extinguish, use a CO2 fire extinguisher, and keep an extinguishing blanket ready. When filling <br /> the Liquid into the Device, be very careful. Keep fuel away from heat, hot surfaces, sparks, open <br /> flames and other ignition possibilities. Do not smoke! <br />