Laserfiche WebLink
-0*03 <br /> 70DINE <br /> AccuSpec V4.46 <br /> GENERAL PERFORMANCE DATA <br /> c us <br /> (ISTE0 <br /> Intertek <br /> General Performance Data <br /> Model PDP400 <br /> At 0' Elevation <br /> Btu/Hr. Input 400,000 <br /> Btu/Hr. Output 332,000 <br /> Entering Airflow (CFM) 5440 <br /> Outlet Velocity 1016 <br /> Air Temp. Rise (°F) 57 <br /> Mounting Height (Max Ft.)' 19 <br /> Heat Throw (Max. Mtg. Ft.)z 69 <br /> Unit Total Power (Amps) 10.55 <br /> As Configured at 0-2000 Ft. Elevation <br /> Btu/Hr. Input 400,000 <br /> Btu/Hr. Output 332,000 <br /> Configured Air Temp Rise (°F) 57 <br /> Motor Data <br /> Horse Power 3/4 <br /> RPM 1125 <br /> Type P.S.C. <br /> Motor Amps 8.20 <br /> Clearances to Combustibles3 <br /> Top 5" <br /> Bottom 12" <br /> Top of Power Exhauster 3" <br /> Side (Access and Non-Access) 1" <br /> Rear 6" <br /> 1 At 650F ambient and unit fired at full-rated input. Mounting height as measured from bottom of <br /> unit, and without deflector hoods. <br /> z Heat Throws are calculated at 650F ambient with a 570F air temperature rise with the unit <br /> mounted at a maximum mounting height of 19 feet. <br /> 3 Provide sufficient room around the heater to allow for proper combustion and operation of the <br /> fan. Free area around the heater must not be less than 1-1/2 times the discharge area of the <br /> unit. <br />