Laserfiche WebLink
• • <br /> Component Description <br /> 2-3.11 1/2-inch Vent Plug,P/N 9196984 <br /> A 1/2-inch Vent Plug is used in the discharge piping near a Range Guard cylinder to prevent pressure <br /> build-up in the discharge pipe system,caused by heat,from rupturing the foil seals on each nozzle. <br /> The 1/2-inch Vent Plug is to be installed in the discharge piping so that it faces the ceiling or the wall. <br /> CAUATION NEVER INSTALL IT FACING DOWN OR AT THE FLOOR. <br /> 1/2 in. '^-- <br /> (13 mm) <br /> (29 mm) <br /> 1 <br /> Figure 2-49. 1/2-inch Vent Plug,P/N 9196984 <br /> 2-3.12 Keeper Pin, P/N 9197108 <br /> The Keeper Pin (P/N 9197108)is used to prevent actuation while installing the system. <br /> (4,0\H <br /> Figure 2-50. Keeper Pin,P/N 9197108 <br /> 2-3.13 System Recharge <br /> For recharge purposes,select the size of the Karbaloy agent recharge container(see Table 2-22)that <br /> fits the cylinder. <br /> Table 2-22.Wet Chemical Agent <br /> Part Number Wet Chemical <br /> 9197428 RG-1.25G Karbaloy Recharge Container <br /> 9197257 RG-2.5G Karbaloyl Recharge Container <br /> 9196991 RG-4GS/RG-4GM Karbaloy Recharge Container <br /> 9196783 RG-6G Karbaloy Recharge Container <br /> P/N 9127100 2-43 January 2007 <br />