Laserfiche WebLink
Optional Equipment (for qualified installers only) 57 <br /> LP Conversion Instructions <br /> The GSR Stepper Motor Kit is required for converting this appliance to LP(4-pack=94400999, single=250-01463). <br /> The kit contains the stepper motor(regulator)and torx wrench. The burner orifices are shipped with the appliance. <br /> WARNING <br /> This conversion kit shall be installed by a qualified service agency in accordance with the <br /> manufacturer's instructions and all applicable codes and requirements of the authority having <br /> jurisdiction. If the information in these instructions are not followed exactly, a fire, explosion or <br /> production of carbon monoxide may result causing property damage, personal injury or loss of <br /> life. The qualified service agency is responsible for the proper installation of this kit. The <br /> installation is not proper and complete until the operation of the converted appliance is checked <br /> as specified in the manufacturer's instructions supplied with the kit. <br /> Convert the appliance prior to installing the gas line to ensure proper gas use. <br /> 1 Access the firebox. <br /> 2 Remove the side ember trays. Grasp the burner with both hands and lift it straight up and out of the <br /> firebox. <br /> NOTE: When re-installing, make sure the flat edges of the ember trays face inwards. <br /> 8 <br /> ©Travis Industries 4/19/23 - 1443 Greenfield GSR2 <br />