Laserfiche WebLink
Element 6: Protect Slopes (2.1.6) <br /> Will steep slopes be present at the site during construction? <br /> No <br /> All cut and fill slopes will be designed, constructed, and protected in a manner that <br /> minimizes erosion. The following specific BMPs will be used to protect slopes for this <br /> project: <br /> • Mulching (BMP C121) <br /> • Plastic Covering (BMP C123) <br /> • Temporary and Permanent Seeding (BMP C120) <br /> Erosion will be minimized by designing and constructing cut-and-fill slopes in a manner where <br /> continuous length of slope will be reduced with diversions and roughening slope surfaces. <br /> Stormwater runoff will be diverted away from slopes and disturbed areas with interceptor dikes, <br /> pipes, and swales. Check dams will be installed every 100' or 2' of elevation change along <br /> constructed channels in order to recude flow velocity and erosion. Excavated material shall be <br /> placed on the uphill side of trenches, consistent with safety and space considerations. <br /> Responsible Staff: Contractor <br /> 12 <br />