Laserfiche WebLink
Element 8: Stabilize Channels and Outlets (2.1.8) <br /> Provide stabilization, including armoring material, adequate to prevent erosion of outlets, <br /> adjacent stream banks, slopes, and downstream reaches, will be installed at the outlets of all <br /> conveyance systems. <br /> Where site runoff is to be conveyed in channels, or discharged to a stream or some other <br /> natural drainage point, efforts will be taken to prevent downstream erosion. The specific <br /> BMPs for channel and outlet stabilization that shall be used on this project include: <br /> • Mulching (BMP C121) <br /> Stormwater runoff will be diverted away from slopes and disturbed areas with interceptor dikes, <br /> pipes, and swales. Check dams will be installed every 100' or 2' of elevation change along <br /> constructed channels in order to recude flow velocity and erosion. Excavated material shall be <br /> palced on the uphill side of trenches, consistent with safety and space considerations. Riprap <br /> pads shall be installed at the outlets of all conveyance systems in order to provide stabilization <br /> and adequate prevention of erosion to outlets, adjacent stream banks, slopes and downstream <br /> reaches. <br /> 14 <br />