909 SE EVERETT MALL WAY CRUCIBLE BREWERY 2025-03-28

4. Install the Water Heater Z223.1/NFPA 54, or the Natural Gas and Topics . Propane Installation Code, CSA B149.1. • Installation Guidelines • The appliance, when installed, must be electrically grounded in accordance with • What you will need local codes or, in the absence of local • Choose Installation Location codes, with the National Electrical • Mount Water Heater to the Wall • Code,ANSI/NFPA 70, or the Canadian • Vent Water Heater Electrical Code, CSA C22.1. • Connect Water Supply • The appliance and its main gas valve • Install Isolation Valves must be disconnected from the gas supply • Install Pressure Relief Valve piping system during any pressure testing • Connect Condensate Drain of that system at test pressures in excess of 1/2 psi (3.5 kPa) (13.84 in W.C.). For • Connect Gas Supply system testing at pressures less than or • Connect Power Supply equal to 1/2 psi (3.5 kPa) (13.84 in W.C.) • Configure Parameter Settings the appliance must be isolated from the • Connect External Pump with Circ-Logic gas supply piping by closing its individual • Post-Installation Checklist manual shutoff valve. • You must follow the installation instructions THIS SECTION IS INTENDED FOR THE and those in section "4.5 Vent the Water INSTALLER Heater"for adequate combustion air and Installer qualifications:A trained and qualified exhaust. professional must install the appliance, inspect • If a water heater is installed in a closed it, and leak test the water heater before use. water supply system, such as one having The warranty will be voided due to any improper a backflow preventer in the cold water sup- installation. The trained and qualified professional ply line, means shall be provided to control should have skills such as: Gas sizing; Connecting thermal expansion. Contact the water sup- gas lines, water lines, valves, and electricity; plier or local plumbing inspector on how to Knowledge of applicable national, state, and control thermal expansion. local codes; Installing venting through a wall • Should overheating occur or the gas sup- or roof; and training in installation of tankless ply fail to shut off, turn off the manual gas water heaters. Training for Rinnai Tankless control valve to the appliance. Water Heaters is accessible online at www. (En cas de surchauffe ou si('alimentation trainingevents.rinnai.us. en gaz ne s'arrete pas, fermez manuelle- ment/e robinet d'arret de Fadmission de 41 Installation gaz.) • Combustion air must be free of chemicals, such as chlorine or bleach, that produce Guidelines fumes. These fumes can damage com- ponents and reduce the life of your appli- When installing the water heater, follow these ance. guidelines: • This water heater is suitable for combina- tion water heating and space heating and not suitable for space heating applications only. • The installation must conform with local codes or, in the absence of local codes, with the National Fuel Gas Code,ANSI Rinnai Tankless Water Heater Installation and Operation Manual 17