Laserfiche WebLink
4.4 Mount the Water Heater to the Wall <br /> 4.4.1 Mount the Internal 3. Insert the top bracket into the wall mounting <br /> bracket. Make sure the wall mounting bracket <br /> (Indoor) Water Heater is attached to the wall and can hold the weight <br /> of the boiler before you fully let go. <br /> You Will Need: <br /> • Rinnai Tankless Water Heater <br /> (Internal/Indoor Model) <br /> • Wall Mounting Bracket <br /> Supplied by Installer: <br /> • Level <br /> • 4 Screws for mounting bracket installation <br /> Use appropriate screws for type of wall e <br /> constructions. <br /> Instructions: <br /> 1. Hold the wall mounting bracket up against the <br /> wall and use a level to make sure the bracket <br /> is even. Proper orientation requires the water <br /> heater to be level. <br /> Figure 9:Level the bracket <br /> 2. Use four screws to secure the wall mounting <br /> bracket to the wall (two screws on the far left <br /> side and two screws on the far right side). <br /> Use the appropriate screws for the wall <br /> construction to secure the mounting bracket to <br /> the wall between two studs. 7 <br /> Figure 11: Mount the top bracket <br /> Figure 10: Secure the bracket <br /> Rinnai Tankless Water Heater Installation and Operation Manual 24 <br />