|
This document, materials or presentation, whether offered online or presented in hard copy ("ADT Informational Tools") is for informational purposes only. ADT PROVIDES THESE ADT INFORMATIONAL TOOLS "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The ADT Informational Tools cons
<br />altered, reproduced, stored in or introduced into a retrievals stem, or transmitted in an form or an means (electronic, mechanical,photocopying, recordin , or otherwise), without the prior written permission of ADT, except as otherwise permitted b law. Prior to publication, reasonable effort was made to validate this information. The ADT Information Tools may include technical inaccuracies or typographical errors. Actual savings or results
<br />P Y Y Y Y 9 P P P p Y P Y9
<br />or remove any part of this statement.
<br />INITIATING WIRING
<br />CLASS A OR B NOTIFICATION WIRING
<br />MOUNTING HEIGHTS
<br />,roprietary and confidential materials. No part of the ADT Informational Tools may be modified,
<br />may be different from those outlined in the ADT Informational Tools. The recipient shall not alter
<br />ADW
<br />Commercial
<br />SIGNATURE LOOP WIRING LIMITATIONS:
<br />SIGNATURE DUAL DRIVER CONTROLLER MODULES SUPPORTS UP TO 250
<br />INTELLIGENT SIGNATURE DETECTORS AND 250 INTELLIGENT SIGNATURE
<br />MODULES
<br />WIRE LENGTH LIMITATIONS:
<br />NON -TWISTED, NON -SHIELDED WIRE
<br />16AWG - 20pf/FT & 4.02 OHMS/1000 FEET
<br />18AWG - 20pf/FT & 6.38 OHMS/1000 FEET
<br />DETECTORS ONLY 16AWG - 125 DETECTORS - 9,275'
<br />MODULES ONLY 16AWG - 125 MODULES - 7,921'
<br />DETECTORS AND MODULES 16AWG - 125 OF EACH - 3,608'
<br />DETECTORS ONLY 18AWG - 125 DETECTORS - 5,839'
<br />MODULES ONLY 18AWG - 125 MODULES - 4,986'
<br />DETECTORS AND MODULES 18AWG - 125 OF EACH - 2,271'
<br />TWISTED PAIR, NON -SHIELDED WIRE
<br />16AWG - 36pf/FT & 4.02 OHMS/1000 FEET
<br />18AWG - 25pf/FT & 6.38 OHMS/1000 FEET
<br />DETECTORS ONLY 16AWG - 125 DETECTORS - 9,275'
<br />MODULES ONLY 16AWG - 125 MODULES - 7,921'
<br />DETECTORS AND MODULES 16AWG - 125 OF EACH - 3,608'
<br />DETECTORS ONLY 18AWG - 125 DETECTORS - 5,839'
<br />MODULES ONLY 18AWG - 125 MODULES - 4,986'
<br />DETECTORS AND MODULES 18AWG - 125 OF EACH - 2,271'
<br />TWISTED PAIR, SHIELDED WIRE
<br />16AWG - 82pf/FT & 4.02 OHMS/1000 FEET
<br />18AWG - 58pf/FT & 6.38 OHMS/1000 FEET
<br />DETECTORS ONLY 16AWG - 125 DETECTORS - 6,098'
<br />MODULES ONLY 16AWG - 125 MODULES - 6,098'
<br />DETECTORS AND MODULES 16AWG - 125 OF EACH - 3,608'
<br />DETECTORS ONLY 18AWG - 125 DETECTORS - 5,839'
<br />MODULES ONLY 18AWG - 125 MODULES - 4,986'
<br />DETECTORS AND MODULES 18AWG - 125 OF EACH - 2,271'
<br />SIGNATURE DATA LOOP WIRING. CLASS B ONLY SIGNATURE DATA LOOP. CLASS B ONLY
<br />eox eox
<br />A ,., To IE- eL Ta I I To NexT
<br />s ioocra Device ioocinoewce
<br />80 00
<br />SERIES / PARALLEL WIRING, ACCEPTABLE T-TAPPING AT EVERV DEVICE, UNACCEPTABLE
<br />I �
<br />sic oaTa I'I I'I To ex DATA I'I I'I To NEXT
<br />v NEXT
<br />s s
<br />em mm me
<br />oev cE T oevicE T oevicE T oewce T
<br />T-TAPPING, ACCEPTABLE STAR -TAPPING, UNACCEPTABLE
<br />NOTIFICATION WIRING
<br />SPEAKER CIRCUIT WIRING LIMITATIONS:
<br />WIRE LENGTH LIMITATIONS:
<br />THE MAXIMUM ALLOWABLE WIRE LENGTH IS THE FARTHEST DISTANCE THAT A
<br />SPEAKER CIRCUIT CAN EXTEND FROM THE AMPLIFIER TO THE LAST SPEAKER
<br />WITHOUT LOSING 0.5 dB OF SIGNAL. THE FOLLOWING ARE MAXIMUM DISTANCE
<br />BASED ON APPROXIMATE WATTAGE OF THE SPEAKER CIRCUIT. CIRCUIT LENG-
<br />ARE FURTHER BASED ON ORIGINATION OF A CIRCUIT FROM EITHER THE
<br />AMPLIFIER OR FROM THE CC1 MODULE.
<br />ALLOWABLE LENGTH AT 25 Vrms, WITH 0.5 dB LOSS
<br />16AWG - 20 WATTS - 231'
<br />16AWG - 30 WATTS - 154'
<br />16AWG - 40 WATTS - 116'
<br />ALLOWABLE LENGTH AT 70 Vrms, WITH 0.5 dB LOSS
<br />16AWG - 20 WATTS - 1815'
<br />16AWG - 30 WATTS - 1210'
<br />16AWG - 40 WATTS - 907'
<br />NAC CIRCUIT (HORN, STROBE) WIRING LIMITATIONS:
<br />FOR 24VDC SYSTEMS, MINIMUM DEVICE OPERATING VOLTAGE IS 16VDC.
<br />VOLTAGE DROP CALCULATIONS ARE BASED ON 16VDC AND POWER SUPPLY
<br />DE -RATED AND ON DEPLETED BATTERY BACKUP PER THE PRESCRIBED PERIOD
<br />OF STANDBY AND ALARM RING TIME. THE VOLTAGE DROP WILL LIMIT THE
<br />CIRCUITS CAPACITY IN ALMOST ALL CASES AND CURRENT CANNOT BE USED AS
<br />THE ONLY CIRCUIT WIRING LIMITATION. ALTERATIONS TO CIRCUIT LENGTH
<br />FROM THOSE CALCULATED MAY CAUSE CIRCUITS TO BE OUT OF THE
<br />TOLERANCES GRANTED BY THE FIRE ALARM CODE. CHANGES TO DEVICE
<br />LOCATION OR CIRCUIT LENGTH SHALL BE COMMUNICATED TO THE ADT
<br />COMMERCIALTEAM.
<br />NAC CIRCUIT WIRING AND ROUTING MUST NOT EXCEED WHAT IS SHOWN ON THE
<br />DESIGN DRAWINGS AND CALCULATIONS. A VOLTAGE DROP TEST IS PART OF
<br />MOST FIRE FINALS AND IS REQUIRED BY NFPA. A FAILED FIRE FINAL MAY
<br />REQUIRE REWIRING OF THE FAILED CIRCUITS.
<br />WIRE RESISTANCE RATINGS USED FOR CALCULATIONS:
<br />18AWG - 13 OHMS PER 1000'
<br />16AWG - 8 OHMS PER 1000'
<br />14AWG - 5.2 OHMS PER 1000'
<br />I_1rLl]tt ��1&IZNIdfleJtiM�il_1s18�91�[e%°iCfiti917�[iF,ly� ALL/�7l�dril&0
<br />FACP
<br />---� fir---� rt-----J
<br />OR
<br />I I
<br />I I I I EOL RESISTOR ON
<br />NAC
<br />I I
<br />I I I I NON ADDRESSABLE
<br />ll IILy�
<br />W
<br />I I I I CIRCUITS
<br />DEVICE
<br />DEVICE
<br />CLASS B. STYLE 4 WIRING
<br />FACP ---� �tr--- f-t-1- 7
<br />OR II I I I� II
<br />NAC -
<br />I
<br />l�J l�J
<br />DEVICE DEVICE
<br />I �
<br />IL--------------
<br />L----------------J
<br />CLASS A, STYLE 6 WIRING
<br />SEPARATION OF CLASS A CIRCUITS - INSTALLATION EXCEPTIONS:
<br />CLASS A OUTGOING AND RETURN CONDUCTORS, EXITING AND RETURNING
<br />TO THE CONTROL PANEL, ARE TO BE ROUTED SEPARATELY. THE MINIMUM
<br />RECOMMENDED SEPARATION IS 1 FT. VERTICALLY AND 4 FT.
<br />HORIZONTALLY. THE FOLLOWING EXCEPTIONS STILL DO NOT ELIMINATE
<br />THE 2ND PAIR OF WIRES. THEY ALLOW YOU TO USE A SINGLE RACEWAY
<br />AND ELIMINATE THE SEPARATION FOR THESE CONDITIONS.
<br />1. WHEN MAXIMUM CABLE, ENCLOSURE, OR RACEWAY IS LESS THAN 10
<br />FEET. NO LIMIT TO NUMBER OF DEVICES.
<br />2. UNLIMITED CONDUIT OR RACEWAY DROP TO AN INDIVIDUAL DEVICE.
<br />3. UNLIMITED CONDUIT OR RACEWAY DROP TO A ROOM NOT
<br />EXCEEDING 1000 SQ, FT. NO LIMIT TO THE NUMBER OF DEVICES.
<br />RECORD DRAWINGS
<br />AS -BUILT / RECORD DRAWING REQUIREMENTS:
<br />THE FOLLOWING INFORMATION SHOULD BE RECORDED ON A SEPARATE SET OF
<br />DRAWINGS FOR EACH PROJECT:
<br />1. ANY CHANGES IN THE LOCATION OF ANY ASSOCIATED FIRE ALARM OR
<br />INTERFACE EQUIPMENT. CONTROL PANELS, ANNUNCIATORS, DETECTORS,
<br />CONTROL RELAYS, INPUT AND OUTPUT MODULES, TERMINAL CABINETS,
<br />ETC.
<br />2. ANY CHANGES TO CIRCUIT WIRING. THIS INCLUDES DELETION OR
<br />ADDITIONAL WIRING RUNS. ANY RE-ROUTING OF CIRCUIT WIRING. ANY
<br />ADDITIONS OR DELETIONS TO THE NUMBER, LOCATION, AND ORDER OF
<br />DEVICE WIRING ON A CIRCUIT.
<br />3. ADDRESSES AND/ OR LABELS FOR ALL ADDRESSABLE DEVICES.
<br />4. CANDELA SETTINGS OF ALL VISUAL NOTIFICATION DEVICES.
<br />5. WATTAGE TAP SETTINGS OF ALL SPEAKER NOTIFICATION DEVICES.
<br />ANY CHANGES SHALL BE DISCUSSED WITH THE ADT PROJECT MANAGER
<br />TO ENSURE SYSTEM AND CODE PARAMETERS ARE MET. ADT COMMERCIAL SHALL
<br />NOT BE HELD ACCOUNTABLE FOR CHANGES MADE WITHOUT APPROVAL.
<br />THIS INFORMATION SHALL BE NEAT AND LEGIBLE WHEN PRESENTED TO THE
<br />TECHNICIAN AT THE CONCLUSION OF THE PROJECT. PLEASE NOTE CONTACT
<br />INFORMATION ON DRAWINGS FOR INDIVIDUALS WITH FAMILIARITY OF
<br />INSTALLATION IN THE EVENT QUESTIONS ARISE DURING THE CLOSEOUT
<br />PROCESS.
<br />' DEVICES SHOWN DEPICT DEVICE TYPES ONLY.
<br />NFPA 72 AND ADA DEVICE
<br />INSTALLATION REQUIREMENTS
<br />FIRE
<br />ALARM SYSTEM OPERATIONAL MATRIX
<br />ALARM
<br />TROUBLE
<br />SUPERVISORY
<br />ELEVATOR
<br />FUNCTIONS
<br />REQUIRED
<br />FUNCTIONS
<br />z
<br />o-
<br />0
<br />o-
<br />0
<br />O
<br />0
<br />F
<br />m
<br />F
<br />rn
<br />LL
<br />z
<br /><
<br />F
<br />m
<br />z
<br />m
<br />z
<br />0
<br />�
<br />w
<br />z
<br />O
<br />m
<br />¢
<br />¢
<br />z
<br />0
<br />¢
<br />N
<br />N
<br />z
<br />w
<br />w
<br />i
<br />>
<br />~
<br />z
<br />O
<br />>
<br />.
<br />w
<br />_
<br />w
<br />x
<br />Z
<br />O
<br />N
<br />cr
<br />W
<br />00
<br />Q
<br />U
<br />w
<br />O
<br />O
<br />0
<br />>
<br />0
<br />m
<br />w
<br />LL
<br />N
<br />ti
<br />to
<br />=
<br />w
<br />¢
<br />U
<br />w
<br />¢
<br />¢
<br />0
<br />O
<br />Cie
<br />o-
<br />w
<br />LL
<br />0
<br />o
<br />LL
<br />r
<br />F
<br />>
<br />w
<br />>
<br />w
<br />�
<br />_
<br />U
<br />m
<br />¢
<br />U
<br />¢
<br />¢
<br />¢
<br />O
<br />O
<br />w
<br />,
<br />m
<br />g
<br />a
<br />¢
<br />w
<br />~
<br />w
<br />w
<br />u,
<br />m
<br />J
<br />w
<br />¢
<br />0
<br />m
<br />in
<br />W
<br />X
<br />¢
<br />w
<br />J
<br />m
<br />F
<br />CAUSE
<br />¢
<br />¢
<br />¢
<br />0
<br />w
<br />ai
<br />ti
<br />¢
<br />a
<br />0
<br />ai
<br />MANUAL PULL STATION
<br />AREA SMOKE/HEAT DETECTORS
<br />DUCT SMOKE DETECTORS
<br />SMOKE DETECTOR AT LEVEL 1 ELEV. LOBBY
<br />SMOKE DETECTOR AT LEVEL 2 ELEV. LOBBY
<br />SMOKE DETECTOR AT ELEV. CONTROL ROOM
<br />0
<br />WATERFLOW SWITCH
<br />TAMPER SWITCH
<br />0
<br />AC POWER FAILURE
<br />FIRE ALARM SYSTEM LOW BATTERY, OPEN
<br />CIRCUIT, GROUND FAULT, NAC SHORT,
<br />GENERAL TROUBLE
<br />SCOPE OF WORK
<br />NAC Circuit Load, Voltage Drop & Batte Load Calculations
<br />APS-3
<br />APS Name:
<br />APS-3
<br />Circuit Identifers:
<br />Location:
<br />ELEC RM 3005
<br />Standby: Alarm:
<br />Output #1
<br />utput
<br />Output #3 utput
<br />Aux
<br />P.S. Type:
<br />FCPS-24S8
<br />0.0910 r 0.1450
<br />NAC Sync
<br />NAC Sync
<br />NAC Sync NAC Sync
<br />Power
<br />Part#:
<br />Description:
<br />S31
<br />53-2
<br />53-3 534
<br />X-X
<br />TotalCny
<br />SPSCWL
<br />Ceiling Speakerw/ Strobe set at 15cd
<br />0.0000 0.0410
<br />1
<br />5
<br />1
<br />6
<br />13
<br />SPSCWL
<br />Ceilin S akerw/Strobe set at30cd
<br />0.0000 0.0630
<br />4
<br />1
<br />4
<br />1
<br />10
<br />SPSCWL
<br />Ceilin S akerw/Strobe set at75cd
<br />0.0000 0.1110
<br />1
<br />1
<br />1
<br />1
<br />4
<br />SPSCWL
<br />Ceiling Speakerw/ Strobe set at 95od
<br />0.0000 0.1340
<br />2
<br />2
<br />SPSCWL
<br />Ceiling Speakerw/ Strobe set at 115cd
<br />00000 01580
<br />SCWL
<br />Ceiling Strobe set at 15od
<br />0.0000 0.0410
<br />10
<br />10
<br />12
<br />3nr2
<br />SCWL
<br />Ceiling Strobe set at 30od
<br />0.0000 0.0630
<br />2
<br />SCWL
<br />Ceiling Strobe set at 75od
<br />0.0000 0.1110
<br />0.0000 0.1340
<br />SCWL
<br />Ceilin Strobe set at 115cd
<br />0.0000 01580
<br />SPSWL
<br />Wall Speakerwl Strobe set at 15cd
<br />0.0000 0.0430
<br />0
<br />SPSWL
<br />Wall Speakerw/Strobe set at30od
<br />00000 00630
<br />0
<br />SPSWL
<br />Wall S akerw/ Strobe set at 75cd
<br />0.0000 0.1070
<br />0
<br />SPSWL
<br />Wall Speakerwl Strobe set at 95cd
<br />0.0000 01210
<br />0
<br />SPSWK
<br />Wall S peaker wl Strobe set at 75cd: Weatherproof
<br />0.0000 0.1580
<br />0
<br />SWL
<br />Wall Strobe set at15cd
<br />00000 00430
<br />0
<br />SWL
<br />Wall Strobe set at 30cd
<br />0.0000 0.0630
<br />0
<br />SWL
<br />Wall Strobe set at 75ccl
<br />0.0000 0.1070
<br />0
<br />SWL
<br />Wall Strobe set at 95cd
<br />1 0.0000 0.1210
<br />0
<br />SWL
<br />Wall Strobe set at 115cd
<br />0.0000 0.1800
<br />0
<br />Typical Door Holders
<br />0.0680 0.0000
<br />0
<br /># Devices per Circuit:
<br />18
<br />19
<br />18
<br />11
<br />0
<br />66
<br />0.000
<br />0.000
<br />0.000
<br />0.000
<br />0.0000
<br />0.0910
<br />Total Standby Circuit Calculated Amps (3):
<br />Total Alarm Circuit Calculated Amps (1):
<br />0.940
<br />1.057
<br />0.896
<br />0.543
<br />0.0000
<br />0.1450
<br />14AWG
<br />14AWG
<br />14AWG
<br />14AWG
<br />14AWG
<br />Total
<br />Wire Gauge Used (awg):
<br />Circuit Length (ft):1
<br />395
<br />400
<br />350
<br />455
<br />0
<br />Amps
<br />193
<br />2.20
<br />1.63
<br />1.28
<br />0.00
<br />Estimated Voltage Drop (dc):
<br />Required
<br />Estimated EOL Voltage (dc):1
<br />22.07
<br />1 21.80
<br />1 22.37
<br />1 22.72
<br />1 24.00
<br />3.436
<br />Calculated Voltage Drop %:1
<br />8.0%
<br />1 9.2%
<br />1 6.8%
<br />1 5.4%
<br />1 0.0%
<br />1) Current Draw Measurement based on: UL1971,16-33V, DC, High
<br />db & Temporal Patten
<br />2) Some Outdoor/WP Devices have the same Measured Current Draw as the Indoor Devices and may
<br />not listed separately above.
<br />3) When the APS is configured for "Doors", Output #4 shutsdown on
<br />loss of AC Power. Therefore no "Standby" Current Draw is shown
<br />BATTERY LOAD CALC for APS-3:
<br />NACP.S.MaxRating:1
<br />8.000
<br />Total Amps Required: 3.436 % Used:
<br />43%
<br />Hours Standby: 24
<br />Total Standby Current
<br />0.0910
<br />Total Hours Required for Standby (AH):
<br />2.2
<br />Minutes Alarm: 15
<br />Total Alarm Current:
<br />3.5810
<br />Total Hours Required for Alarm (AH):
<br />0.9
<br />Backup Generator? NO
<br />Minimum Battery Size Needed (AH):
<br />3.1
<br />Voice Evacuation? YES
<br />Spare Circuit Capacity:
<br />20%
<br />Spare Battery Capacity Required:
<br />0.6
<br />Military? NO
<br />are Battery Load Factor:
<br />20 %
<br />Actual Battery Size Required (Al
<br />3.7
<br />MAXIMUM
<br />CHARGER CAPACITY IS: 18AH
<br />Total AH Rated Batteries Supplied:
<br />ALL OTHER EXISTING REMOTE NAC POWER SUPPLY CALCULATIONS AND EXISTING FIRE ALARM CONTROL PANEL SHALL REMAIN THE SAME.
<br />�J
<br />I- 0
<br />�aC')
<br />O Z LI_
<br />U) LLI 0_
<br />0
<br />00(.)
<br />OHS
<br />zO�w
<br />V)Dz
<br />0
<br />U
<br />W
<br />Q O
<br />N
<br />00
<br />Lu
<br />W
<br />LL
<br />Y
<br />O0�
<br />Q� Lu
<br />O W CD
<br />O
<br />CM
<br />Y
<br />m
<br />m
<br />J
<br />W
<br />CS
<br />o
<br />Q
<br />N
<br />0
<br />H_
<br />lY
<br />W
<br />a
<br />O
<br />O
<br />LL
<br />d
<br />W
<br />U
<br />w
<br />�
<br />W
<br />K
<br />SCALE:
<br />N/A
<br />PREPARED BY:
<br />LB
<br />CHECKED BY:
<br />HS
<br />DATE:
<br />07/18/2023
<br />PROJECT NO:
<br />501403047
<br />TITLE:
<br />PROJECT NOTES
<br />SHEET:
<br />FA-0-2
<br />
|