Laserfiche WebLink
SD&C <br />PO Box 413, White Salmon, WA 98672 <br />September 26, 2023 <br />Don Cunningham <br />Code Enforcement Officer <br />Permit Services <br />3200 Cedar Street <br />2nd Floor <br />Everett, WA 98201 <br />Phone (206)459-5775 <br />This Interim Discharge Prevention Plan (IDPP) has been prepared to respond to the City of Everett <br />Corrective Action Notice Case Number: CE23-0368 dated 4/7/2023 for the Nelson Petroleum <br />(Nelson) Property located at 9826 7th Ave SE in Everett, WA (Facility). This plan has been <br />prepared using the professional oversight, survey, and design review of Pace Engineering, and <br />Slotta Design and Consulting (SD&C). The IDPP is proposed to be implemented during the <br />conversion from stormwater discharge to the sanitary sewer at the site. <br />On June 14, 2023 Nelson terminated the stormwater discharge from the operational portions of <br />the facility by closing the oil stop valve. The stormwater collects in a 4,500-gallon underground <br />vault which is no longer required for secondary containment from the above ground storage tanks. <br />The non -operational areas, including the roof drains from the adjacent shopping mall, located to <br />the west of the property, and northeastern located storm drain are not interrupted and continue to <br />discharge to the drainage swale located off -site to the west. <br />As interim practice, Nelson is monitoring the volume of water collecting in the underground vault <br />and disposing the water off site. During the recent rain approximately 2,500 gallons of water <br />which collected in the vault was disposed off -site using a subcontractor Marine Vacuum Service. <br />If you have any questions concerning the Interim Discharge Plan or the facility, please contact <br />SD&C at (206) 459-5775 or Kory DeMun, Facility Coordinator with Nelson Petroleum Inc. at <br />(425) 353-9701. <br />Sincerely, <br />SD&C <br />L' S. SloWa, <br />Timothy S Slotta L.G. L.H.G. L.E.G <br />Hydrogeologist # 2175 <br />Pace Engineering <br />John Anderson P.E. <br />Professional Engineer <br />