5901 23RD DR W ZAP ENERGY 2025-08-04

victaulic.com 6.0 NOTIFICATIONS A WARNING ® O Read and understand all instructions before attempting to install any Victaulic products. • Always verify that the piping system has been completely depressurized and drained immediately prior to installation, removal, adjustment, or maintenance of e ® any Victaulic products. Wear safety glasses, hardhat, and foot protection. Failure to follow these instructions could result in death or serious personal injury and property damage. • These products shall be used only in fire protection systems that are designed and installed in accordance with current, applicable National Fire Protection Association (NFPA 13, 13D, 13R, etc.) standards, or equivalent standards, and in accordance with applicable building and fire codes. These standards and codes contain important information regarding protection of systems from freezing temperatures, corrosion, mechanical damage, etc. • The installer shall understand the use of this product and why it was specified for the particular application. • The installer shall understand common industry safety standards and potential consequences of improper product installation. • It is the system designer's responsibility to verify suitability of materials for use with the intended fluid media within the piping system and external environment. • The material specifier shall evaluate the effect of chemical composition, pH level, operating temperature, chloride level, oxygen level, and flow rate on materials to confirm system life will be acceptable for the intended service. Failure to follow installation requirements and local and national codes and standards could compromise system integrity or cause system failure, resulting in death or serious personal injury and property damage. 11' • When assembling Style 004N Couplings onto end caps, take additional time to inspect and verify that the end cap is seated fully against the center leg of the gasket. Always read and follow the installation instructions provided with the product; these instructions can be downloaded at Victaulic.com. • Use only Victaulic End Caps containing the "QV" or "EZ QV" marking on the inside face. • Always read and follow the I-ENDCAP, Victaulic End Cap Installation Safety Instructions, which can be downloaded at Victaulic.com. • Victaulic recommends the use of Victaulic fittings with Style 004N Couplings. Failure to follow these instructions could result in death or serious personal injury and property damage. NOTICE • Victaulic does not recommend the use of any furnace butt -welded pipe with sizes NPS 27DN50 and smaller Victaulic gasketed joint products. This includes, but is not limited to, ASTM A53 Type F pipe. 10.63 19005 Rev B Updated 11/2023 0 2023 Victaulic Company All rights reserved. victaulic.com 7 XAotaulii;