1513 HOYT AVE B 2025-08-08 - Laserfiche WebLink

Cal Bearman From: Cal Bearman Sent: Friday, December 6, 2024 2:35 PM To: dimensions@dimensionsarch.com Cc: Scott Schreffler Subject: Everett Permit Services - B2408-046 -1513 Hoyt Avenue I'm reaching out about permit B2408-046. I understand that we cannot final the permit at this time. Prior to our inspection team coming back to the project site,we have a couple of follow up items that need to be addressed. Is the building 2'-6" away from the fence on the south side as shown on sheet A-101 of the plans? If this dimension is less than 3', the egress window on the wall (south elevation) abutting the property line cannot stay on that wall. A survey should be taken if the existing window is to be used as an egress window. Section R310.1 of the IRC states that"Emergency escape and rescue openings shall open directly into a public way, or to a yard or court providing an unobstructed path with a width of not less than 36 inches that opens to a public way." The house is required to have a heating system per IRC Section R303.10.The type and location of the system should be specified. If the system is new, it should be indicated as such in the drawings. The house is required to have a water heating system per IRC Section R306.4.The type and location of the system should be specified. If the system is new, it should be indicated as such in the drawings. Seismic restraints should be provided per Section M1307.2. The energy code requires the following for the alterations that occur as part of this project: • Any part of the envelope that is part of the alteration should comply with current code, including insulation (envelope and ductwork), glazing and glazing air leakage. R503.1.1 • Any heating or cooling that is part of the alteration shall meet current code. R503.1.2 _ • New water heating that is part of the alteration shall meet current code. (R503.1.3) • New lighting that is part of the alteration (more than 10% replacement) shall meet current code. R503.1.4 To move this project forward you will need to submit a revised set of plans.The plans should either show a new egress window location for the bedroom or if a survey is completed and the building is at least 3'from the fence,this information can be shown.Additionally,the heating and water heating system information should be provided and any of the energy code requirements for alterations that apply should be identified. Please make any necessary revisions to the drawings and submit the revised set per our re-submittal instructions found here: permit document upload standards and instructions Important note:All resubmittals require a Transmittal Sheet to be filled out and emailed to PermitServices@everettwa.gov in order to keep your permit moving forward. General permit questions can be addressed to Permit Services at PermitServices@everettwa.gov or(425) 257-8810. Let me know if you have any questions related to the comments above. Thank you, Cal i