Laserfiche WebLink
Cr POTTER PAD1 00-4DB/6DB <br /> The Symbol of Protection 4"/6"Addressable Detector Base <br /> Locking Feature Wiring Diagram <br /> The PAD100-6DB and PAD100-4DB include a locking feature that Fig.3 <br /> prevents removal of the detector without using a tool. <br /> 1.To eliminate this feature,break off the locking tab(refer to Figure <br /> 1),and then install the detector. <br /> s+ S+ <br /> Fig.I To FACP <br /> First Detector Base Last Detector Base <br /> Loop(SLC) <br /> 5- S- <br /> OO <br /> a; <br /> ® Break off tab(gray <br /> area)in image to disable <br /> lockingfeare. Ordering Information <br /> Model Description Stock No. <br /> 2.To remove the detector from the base when the locking feature has PAD100-6DB 6"Sensor Base 3992732 <br /> been enabled, insert a small screw driver into the slot on the base to <br /> push the plastic tab while simultaneously turning the detector head PAD100-4DB 4"Sensor Base 13992731 <br /> counter-clockwise. <br /> Fig.2 <br /> Insert small screwdriver <br /> into slot to remove o° <br /> detector from base. r O <br /> Potter Electric Signal Company, LLC St. Louis, MO Phone: 800-325-3936 www.pottersignal.com <br /> PRINTED IN USA 8830107-REV C • 12/18 PAGE 2 OF 2 <br />